What Is Terry Cloth: Loops, Gram Weight And The Towel Order
Terry cloth is a woven fabric with loops standing up from the surface, and the loops are what drink the water.
A plain weave would shed a drop of water. A terry weave holds it, because each loop gives the cloth more surface for water to touch.
That single idea explains almost everything a buyer argues about. A heavier towel is not always a better towel. A taller loop is not always a softer towel. And towel weight, pile height and yarn twist pull against each other.
This article gives the loom, the three families that share the name, the weight sums for one piece and one carton, the four tests worth writing down, and the six lines that stop a factory from guessing.
The Short Answer
Terry cloth is a fabric woven with an extra set of warp yarns. Those yarns are lifted over wires during weaving to form loops.
The loops stay in the cloth. They are not cut, which is what separates terry from velvet or velour.
The definition in use across the trade is broad. The reference entry on terrycloth describes it as a fabric woven with many protruding loops. The same entry notes that it can be woven or knitted.
Two families sit under that name, and they are different products. Towel terry has long loops on one or both faces and goes into towels, robes and wash mitts. French terry has loops on the inside only, a flat outer face, and usually goes into clothing.
Absorbency follows the loop. A longer loop stands further from the base cloth and offers more surface, so it takes up more water.
That is the physical rule. The commercial rules sit on top of it, and they are about weight, twist and how the loop is anchored.
How The Loom Makes A Loop
A terry loom looks like a heavy plain loom with one extra system. It carries two sets of warp yarns instead of one.
The ground warp makes the base cloth, the part that holds the towel together. The pile warp is the loop yarn, and it is fed separately.
During weaving, the pile warp is lifted over a wire or a rod and then beaten back. The weft locks it in place, and a row of loops is left standing.
Pull the wire out and the loops stay. That is the whole mechanism, and it explains why terry needs its own loom rather than a setting on a plain one.
Three variables come out of that mechanism, and a buyer can name all three.
Pile height. How far the wire lifts the loop. Taller loops hold more water and feel plusher, and they also snag more easily.
Pile density. How many loops stand per unit of width. Dense pile feels firm and absorbs fast. Sparse pile feels light and thin, even at the same weight.
Ground structure. How tightly the base cloth is woven. A loose ground lets the loops walk, which is why a towel can shed loops in the wash.
Ask for those three in writing, and a towel quotation stops being a number with no history behind it.
Towel Terry, French Terry, Velour
Four fabrics turn up under the terry name, and one of them is not terry at all at the loom.
Towel terry is the one on the shelf. Long uncut loops, usually all cotton, sometimes blended with polyester. Woven on a terry loom with two warp beams.
French terry is a knit. Loops run on the inside, the outside is flat, and the cloth drapes like a sweatshirt rather than a towel. It is often warp-knitted and may carry a little spandex.
Velour terry starts as terry and then has the loops sheared on one face. The cut face feels smooth and prints well. It also absorbs less than the looped face, because the cut ends pack down.
Waffle and microfiber are the alternatives, not terry. A waffle weave is a flat cloth with a raised grid. A tight short-loop microfiber sheet wicks water rather than holding it.
| Fabric | Loop | Made on | Used for |
|---|---|---|---|
| Towel terry | Uncut, one or both faces | Terry loom, two warp beams | Bath, hand and face towels |
| French terry | Inside only, outer face flat | Knitting machine | Hoodies, pants, baby wear |
| Velour terry | Cut on one face | Terry loom, then sheared | Printed beach towels, robes |
| Waffle | None, raised grid | Dobby or plain loom | Spa towels, quick-dry wraps |
The mix-up is common and expensive. A hoodie brand sends a towel specification to a knitter, and a towel mill quotes a terry loom for a garment order. The words overlap; the machines do not.
One more name belongs here. A loopwheel machine makes terry cloth slowly and produces a soft, sturdy cloth. Wikipedia puts the rate at about one yard an hour and the surviving factories at two, which is why the cloth carries a price of its own.
Loop Height Is The Absorbency Dial
If a buyer changes one thing on a towel, the loop height is the one to change. It moves absorbency faster than weight does.
Picture two towels at the same 500 grams per square metre. One has short dense loops, the other long open loops.
The long-loop towel feels thicker and drinks faster. It also takes longer to dry, because the water sits in the loops rather than spreading through the base cloth.
The short-loop towel dries quicker and stays flatter. Hotels choose it for pool decks, where a towel has to turn around in hours.
Loop height also sets the failure. A tall loop catches a ring, a watch or a nail and pulls out as a long snag. A short loop resists that.
This is where weight misleads. One mill’s guide is blunt about it: a heavier towel can still snag if the pile height and the base cloth are wrong, and loop retention is a separate property from weight.
So the two dials have to be written separately. Weight in grams per square metre, pile height in millimetres or in a named loop class, and the base cloth construction.
Now the trade-off. A tall loop with a loose ground gives a plush hand and a short life. A short loop on a tight ground gives a flat hand and a long life. Most hotel programmes settle in the middle.
What The Gram Weight Settles
Grams per square metre is the first number on a towel sheet, and it is a weight. It is not a softness score, and it is not an absorbency score.
The method is the same one used for any cloth, and the weighing method behind the number is written out in full elsewhere. Cut a sample, weigh it, and divide by its area.
What the number does settle is the band. Mills publish bands, and they roughly agree on the ends and disagree in the middle.
| Band | Mill A: what it says | Mill B: what it says |
|---|---|---|
| 200 to 350 | Not named | Light, very fast drying, budget rooms |
| 300 to 400 | Light, gym and pool, quick to dry | Top of the budget band |
| 400 to 500 | Mid-range, the common hotel choice, 450 to 500 the sweet spot | The hotel recommendation for most properties |
| 500 to 600 | Luxury, with 550 to 600 for premium resorts | Top of the recommended band |
| 600 and up | Super luxury, spa and signature suites | Ultra thick, spa only |
Read the middle row twice. One mill calls 450 to 500 the sweet spot. The other recommends 400 to 500 and pushes 500 and above toward spas.
That is a whole band of disagreement, from two suppliers in the same trade. It is also why a quotation that says “hotel quality” cannot be checked.
Mill A’s published band guide is the source for the split above. Mill B’s table is the source for the 400 to 500 line.
The practical answer is to write the band down and name the towel. A bath towel at 500, a hand towel at 450 and a face cloth at 400 is a coherent programme. One number for everything is not.
The Weight Of One Piece
A towel quotation hides a multiplication, and the buyer can run it in a minute. The weight of one piece is its area times the gram weight.
Area is measured on the finished size, hems included. A 70 by 140 centimetre bath towel is 0.98 square metres.
At 500 grams per square metre, that piece weighs about 490 grams. At 600, it weighs about 588 grams.
That is 98 grams per towel for a band change nobody notices on the shelf. Across 24 towels in a carton it is 2.35 kilograms.
| Piece | Finished area | At 450 GSM | At 550 GSM |
|---|---|---|---|
| Bath, 70 × 140 cm | 0.98 m² | 441 g | 539 g |
| Hand, 50 × 90 cm | 0.45 m² | 203 g | 248 g |
| Face, 33 × 33 cm | 0.11 m² | 50 g | 61 g |
| Bath sheet, 90 × 180 cm | 1.62 m² | 729 g | 891 g |
Two commercial consequences follow. Freight is billed on weight, so a 100 gram step across a container load is money. And a laundry is billed per kilogram, so the same step is money again, every week, for the life of the towel.
The carton is the third place it shows. Which carton and inner bag travel with the towels matters less here than the count per carton. A heavier towel at the same count means a heavier carton and a different pallet plan.
So ask for two numbers, not one: grams per square metre, and grams per piece. A factory that quotes only the first is quoting a cloth, not a towel.
One caution on the arithmetic. Hems, borders and any dobby band carry extra yarn, so a real piece can weigh a little more than the flat sum. Treat the sum as a floor and the scale as the answer.
Yarn Count, Twist And Hand Feel
Two towels can weigh the same and feel nothing alike. The difference sits in the yarn, and the trade describes it with three words.
Count. How fine the yarn is. A finer count gives a smoother loop and a softer hand, and it costs more per kilogram.
Twist. How tightly the yarn is spun. Low twist opens the loop and absorbs faster. High twist makes a crisp, hard-wearing towel that feels flatter.
Fibre length. Long-staple cotton spins into a smoother yarn with fewer loose ends. Short-staple cotton pills and sheds at the loop tips.
Ask the factory to name the count and the twist for pile yarn and ground yarn separately. Those are two yarns, and a cheap quote is usually cheap in one of them.
There is a familiar trap here for anyone who buys other textiles. Weight and warmth are not the same thing in a blanket either, which is the point of the blanket fabric comparison. In a towel the same mistake is weight against absorbency.
Colour matters to the hand as well. A piece-dyed towel goes through wet processing after weaving, and the loop can open or flatten in that bath. Yarn-dyed towel keeps its loop shape and costs more.
None of this is visible in a photograph. A sample in the hand settles it faster than a page of specification.
Four Numbers For The Spec Sheet
A towel sheet that carries four measured numbers can be checked. One that carries adjectives cannot.
Weight. Grams per square metre, measured on a sample of known area, plus the grams per piece for the finished size. Ask where the sample came from on the roll.
Loop pull. A clamp pulls a single loop at a marked point until it releases. Repeat it at several points across the piece and report the lowest figure, not the average.
Absorbency. Time for a drop or a strip to take up water, reported in seconds. Absorbency is a rate, so a number without a method means little.
Shrinkage. Dimensional change after a stated wash and dry cycle, given as a percentage in length and width. Towel shrinks most on the first wash, so the first cycle is the one to test.
Attach each figure to a method and to a specimen. A pull test on a fresh towel says nothing about the same towel after twenty washes, and that second number is the one a hotel will live with.
A mill guide makes the same point in its own words: retest when the pile yarn, the ground, the finish or the processing changes. A construction approved last season is not the cloth that ships this season.
The pre-shipment check that catches a thin roll is where those four numbers get tested on a real lot rather than on a swatch.
Four Faults At Goods-In
Most towel claims fall into four boxes. Each one has a cause a buyer can name, and each one is cheaper to catch before the carton is sealed.
Pulled loops. A long snag runs down the face of the towel. The cause is tall pile on a loose ground, and the loop pull guide from one mill treats it as a construction question rather than a weight question.
Bow and skew. The weft runs at an angle, so a folded towel sits crooked and a cut panel is off square. It comes from loom tension and from the finishing range, not from the yarn.
Shrinkage after the first wash. The towel arrives at size and leaves the laundry shorter. Length shrink is usually larger than width shrink, and a buyer who does not allow for it ships a towel that no longer matches the shelf label.
Shedding. Loose fibre comes off the loop tips in the dryer. Short-staple cotton and an open twist both make it worse, and a dark towel shows it first.
The inspection habit that catches all four is a washed sample. Wash one piece from the lot, dry it, and compare it with the approved sample. A dry inspection sees a clean towel; a washed piece shows the towel the customer will own.
The roll check at the mill covers the stage before cutting. The towel stage needs the wash as well.
Six Lines For The Towel Order
A towel order fails in the same six places. Each line below closes one, and each fits on an order sheet.
- Construction. Towel terry, ground warp and pile warp named, loops on one face or both, and the finished size before wash allowance.
- Weight. Grams per square metre for each size, plus grams per piece, plus where the sample is cut on the roll.
- Pile. Loop height class, loop density, pile yarn count and twist, and the same for the ground yarn.
- Size and hem. Cut size, finished size after wash, hem width and stitch count, border or dobby band if any.
- Tests. The four numbers above, each with its method, and the report page with the shipment.
- Packing and label. Count per carton, polybag or none, fibre content in percentages, care label wording, and the barcode if the buyer supplies one.
Send the approved sample with the sheet, and keep one piece from the lot in a drawer. When a second order arrives thinner and lighter, the argument is settled by a scale and a signed towel.
Write the wash allowance on the sheet, not in the chat. A towel quoted at 70 by 140 and delivered at 68 by 136 is a different product, and the difference is legal if nobody wrote the finish size down. The written brief the mill signs is the document that settles which number the line follows.
Send me a towel quotation and the sample weight behind it. I will check the pile height, the gram weight, the grams per piece and the wash allowance, then tell you which line is missing before you place the order.
Check The TowelQuestions Buyers Ask
Is terry cloth always cotton?
No. Towel terry is usually all cotton and sometimes blended with polyester. A blend dries faster and absorbs less, so the fibre mix belongs on the sheet.
What is the difference between terry and French terry?
Towel terry has uncut loops on one or both faces and goes into towels. French terry is a knit with loops inside only, a flat outside, and goes into clothing.
Which GSM should a bath towel be?
Most hotel programmes sit between 400 and 600 GSM. One mill puts the sweet spot at 450 to 500, another recommends 400 to 500, so name the band in writing.
Why does my towel shed fibre?
Short-staple cotton and a loose twist both break at the loop tips. A wash test on one piece from the lot shows the problem before the carton ships.
Can terry cloth be printed?
Yes, and the face matters. A looped face prints soft and fuzzy. A sheared velour face holds a sharper print and absorbs less than the looped face.
Does a heavier towel absorb more?
Only up to a point. Loop height, twist and the base cloth decide how fast water goes in. A heavier towel with a loose ground can still shed loops.
Questions & Comments
We read every one and reply within 24 hoursIf a towel quotation crosses your desk, send it over with the size chart. I will check the pile height, the gram weight and the wash allowance, and say which line the mill will read differently.