Jewelry Material Glossary: 40 Terms Buyers Get Wrong
Home
Yiwu, Zhejiang, China
Mon – Fri 9:00 AM – 6:00 PM · Sat 9:00 AM – 4:00 PM
[email protected]

Jewelry Material Glossary: 40 Terms Buyers Get Wrong

Alan Xiao, Founder of Sourcing Pioneer
Alan Xiao Founder of Sourcing Pioneer
· Updated November 17, 2026 · 14 min read

This glossary defines the material words that decide price, durability and legality in jewelry. Each term is followed by the number that makes it testable, and a link to the page that goes deeper.

Read it as a lookup table, not as a book. The sections are grouped by what the term describes: the base metal, the gold label, the finish, the stone and the test.

One warning before the list. Four of the words below are legal terms with numbers attached, and the rest are trade words with no fixed meaning. Knowing which is which is most of the skill.

Studio still life of jewelry material samples on a beige surface, including plated chain, sterling ring and loose stones
Five metal samples and three stones. Every word in this list describes one of them.

Base Metals

Brass

An alloy of copper and zinc, cheap and easy to cast. It tarnishes quickly and it is rarely sold as a finished surface at retail.

Copper

A soft reddish metal that carries current well, and tarnishes fastest of the group. It is common under plating and in fashion lines.

Zinc alloy

Also sold as Zamak, a die-casting alloy of zinc with small amounts of aluminium, magnesium and copper. Most cast fashion pendants are this material.

Stainless steel 316L

A steel with molybdenum that resists salt and sweat. It is the base for most non-plated fashion jewelry, and the 316L grade is the common buying point.

Titanium

A light, strong metal that takes colour in an electric bath instead of a plating bath. Titanium, which takes colour without a bath is the reason some lines never chip.

Nickel silver

An alloy of copper, zinc and nickel with no silver in it. The name is a trade survival, and a spec should say the alloy rather than the name.

Pewter

A tin alloy, soft and low melting, used for cast decorative pieces. It dents under a thumbnail, so it is a display material.

Tungsten carbide

An extremely hard material used in rings, where scratches are close to impossible. It cannot be resized, so sizing is a production decision.

Gold Labels

Karat

Parts of gold out of twenty-four. 14K is 583 parts per thousand and 18K is 750, and the arithmetic behind both is on the 14K and 18K comparison.

Fine gold

Gold at 24 karat, which is 999 parts per thousand or better. The word gold on its own may only describe this grade under the guides.

Solid gold

A trade word for a piece that is gold alloy all the way through, not hollow and not plated. It does not mean 24 karat.

Gold filled

A sheet of gold alloy bonded to a base metal and rolled, with the gold at least 1/40 of the total metal weight and at least 10K. Gold filled is a weight rule, which is why a 12K GF mark is not a thickness.

Rolled gold plate

The older American name for the same construction. The mark 1/20 12K GF means the gold is one twentieth of the metal weight, at 12 karat.

Gold plated and electroplate

A gold layer applied in a bath. The guides set 0.175 microns of 10K gold as the floor for gold electroplate, which is thin enough to wear through.

Vermeil

Gold plating on sterling silver. Section 23.4 of the guides asks for at least 10K gold and 2.5 microns of fine-gold equivalent. It is the only label of the five that names a base metal.

Gold tone and silver tone

Colour words with no composition behind them. They are lawful as descriptions of appearance, and they must not be read as a material claim.

Gold overlay and 1/40

A rolled or bonded layer measured as a share of the weight, often one fortieth at 14K. The mark carries the fraction because the number is not a thickness.

LabelHow the gold is measuredKarat floorBase metal rule
Gold plated / electroplate0.175 microns in a bath10KNone
Gold filled / rolled gold plate1/40 of the metal weight, bonded and rolled10KNone
Gold overlayStated fraction, such as 1/4010KNone
Vermeil2.5 microns of fine-gold equivalent10KSterling silver
Solid goldAlloy through the whole pieceAny stated karatNo base metal
Table of five gold labels showing how each measures the gold, the karat floor and the base metal rule
Five labels, two units, one trap.

Two of those columns carry the money. A micron figure and a weight fraction are not convertible. A quote that mixes them is not a quote you can compare.

Plating And Finishing

Electroplating

A bath process that deposits metal with current. It reaches recesses well, and the thickness is set by time and current density.

PVD

Physical vapour deposition, a vacuum process that throws a hard film onto the surface. The vacuum coat and the bath process differ in wear life and in colour range.

Rhodium plating

A white platinum-group finish applied over white gold or silver. It is a wear part, so the renewal interval belongs in the product copy.

Barrel plating

A bath where small parts tumble in a rotating drum instead of hanging on a rack. It suits findings and small charms, and it reaches recesses less evenly.

Tarnish

A surface film that forms when a metal meets air and sulphur. It is a film rather than a wear, and a soft cloth removes it before it etches.

E-coating

A thin clear resin layer applied over a plated surface to slow tarnish. It adds gloss and it can yellow under sun.

Enamel

Ground glass fused to metal at high heat. It is hard and it holds colour, and it chips rather than wears when the metal under it flexes.

Resin fill

A cold-poured epoxy used to fill a channel or a letter. It is cheap and it shrinks, so the fill level belongs on the drawing.

Antique finish

A darkening step that leaves recesses dark and highlights bright. It is a look, not a protection, so it needs a top coat to survive wear.

Silver And The Platinum Group

Sterling silver

Silver at 925 parts per thousand, with the rest usually copper. The 925 mark is a legal claim, and the law also asks for a maker’s name or trademark.

Fine silver

Silver at 999 parts per thousand. It is softer than sterling and it tarnishes more slowly, but it dents easily in thin sections.

Silver filled

A sterling layer bonded to a base core. The weight rule is the same idea as gold filled, and the word filled is doing the work.

Platinum and palladium

Two dense white metals used for settings and for alloying white gold. Both are named in section 23.6 of the guides, which restricts their use as descriptions.

White gold

Gold alloyed with white metals, then usually plated. Rhodium is the wear part, so the alloy matters less than the finish schedule.

Stones And Pearls

Cubic zirconia

A synthetic stone with high brilliance and low hardness. It is the default stone in fashion lines and it clouds with abrasion over time.

Moissanite

Silicon carbide, harder than CZ, and it splits light into more colour than diamond. A stone that tests differently on common diamond testers, which is why disclosure matters.

Lab-grown diamond

A diamond grown in a reactor, chemically identical to a mined one. The trade rules require it to be described as lab-grown, not simply as a diamond.

Natural diamond

A diamond formed in the earth. Grading follows the four Cs, and a report is a document, not a label.

Freshwater pearl

A pearl grown in a mussel with no bead, so the nacre is the pearl. The no-bead construction explains both the price and the shape spread.

Akoya pearl

A saltwater pearl grown around a bead in a pearl oyster, usually round and more costly for the same size. GIA lists it alongside the freshwater type.

Shell pearl

A bead cut from the mother-of-pearl lining of a shell rather than grown inside an animal. It is a legitimate product that is often sold without the distinction.

Findings And Construction

Lobster clasp

The common trigger clasp with a lever. Check the wire gauge, because a thin clasp on a heavy chain is the first failure point.

Spring ring

A round clasp with a spring-loaded pin, cheap and light. It suits thin chains and it opens under load in a way a lobster does not.

Extender chain

A short length of chain with a jump ring at the end, used to give one size range. Its clasp and its plating face the same wear as the main chain.

Jump ring

A small ring that joins two parts. An open ring pulls apart, so a soldered or closed ring is the only version that holds under tension.

Hollow construction

A piece formed from thin sheet with air inside. It looks large for its weight and it dents, so the wall thickness belongs on the order.

Solder

The filler metal that joins parts. It matters here because the legal tolerances for gold fineness change when a piece contains solder.

Testing And Paperwork

XRF

A handheld reading of surface composition in seconds. It reads the plating first, so a plated piece can pass while the core does not.

Assay

A laboratory test that dissolves or cups a sample. It is slower and destructive, and it is the evidence that settles a disputed lot.

Nickel release

A migration test for nickel in skin contact, used where the market regulates it. It is not the same question as nickel content.

Salt spray

An accelerated corrosion test reported in hours to first change. It is the fastest way to compare two plating suppliers on paper.

Technical file

The pack of declarations, test reports and drawings behind a product. The spec page a factory builds against is the first document in it.

Words To Leave Out Of A Spec

Five of the words in this list cause most of the arguments, because they carry no number.

High quality, durable, premium, real and hypoallergenic. Each one sounds like a promise and none of them can be measured at goods-in.

Replace them. Durable becomes a salt-spray figure. Hypoallergenic becomes a nickel release result. Real becomes a named material with a fineness.

Premium has no substitute at all, which is a clue. If a word cannot be converted into a test, it belongs in marketing and not in an order sheet.

Five Questions Before You Approve A Material

If a supplier sends a material name and nothing else, these five questions settle most of it.

What is the base? An alloy name, or a steel grade, or the word sterling.

What is on top? Microns for a bath, a fraction for a bonded layer, and nothing at all for a bare metal.

What is the finish schedule? Rhodium or lacquer needs a renewal interval, and the customer pays that cost later.

What is the stone? Name, treatment, and whether it was grown or mined, in words rather than initials.

What proves it? An XRF reading, a salt spray figure or a release report, dated and traceable to the batch.

Reading A Quotation

A jewelry quotation mixes the words above with numbers that look similar and are not. The table shows the usual pairings.

What the quote saysWhat to askNumber to record
Gold platedMicrons or a weight fraction?Micron figure plus the karat of the plating
18K gold filledWhat fraction of the metal weight?1/20 or 1/40, written with the karat
VermeilIs the base certified sterling?925 base plus 2.5 microns of gold
Silver toneWhich metal, and is it plated?Base alloy plus finish, named
Stainless steelWhich grade?316L, and the nickel release result
HypoallergenicTested to what, and by whom?A release limit and a report number

Six Lines For The Order Sheet

Six lines convert this glossary into a document a factory can build to.

One. Base metal, named as an alloy, with the grade for steel and titanium.

Two. Gold label with its number: microns for plating, fraction for filled, karat for both.

Three. Finish and its renewal interval, including rhodium where it applies.

Four. Stones by name and treatment, with the lab-grown or imitation word spelled out.

Five. Findings by type and gauge, and whether rings are closed or soldered.

Six. Evidence: XRF per batch, salt spray hours, and the nickel release report.

Put the same six lines on the inspection order. The inspection order that travels with the goods can only confirm what was written down.

Six line order card for jewelry materials covering base metal, gold label, finish, stones, findings and evidence
Six lines, and the glossary stops being a vocabulary test.
TERM CHECK

Send a spec sheet, or a listing draft that has already gone live and started arguments. I will mark every word that carries no number, name the three that cause the most disputes, and write the replacement line for each one. No cost, and no obligation.

Send My Spec

Questions Buyers Ask

Is gold filled the same as gold plated?

No. Filled is a bonded layer measured as a share of the metal weight, and plated is a bath layer measured in microns.

What does 12K GF mean?

A 12 karat gold layer on a gold-filled product. The usual full mark is 1/20 12K GF, which states the fraction and the karat.

Which finish lasts longer, PVD or electroplating?

PVD generally resists abrasion better because the film is harder. Both depend on thickness, so the figure belongs on the order.

Is vermeil the same as gold plated silver?

It is the regulated name for it. The base must be sterling silver and the gold at least 10K at 2.5 microns.

Is stainless steel jewelry hypoallergenic?

316L releases little nickel for most wearers, but hypoallergenic is not a regulated claim. Ask for a release test if it matters.

Which words should never appear in a spec?

High quality, durable, premium, real and hypoallergenic. None of them can be measured when the goods arrive.

Questions & Comments

We read every one and reply within 24 hours

Send a spec sheet or a listing draft and I will mark the words that carry no number, name the three that cause the most disputes, and show what to write instead of each one.

Subscribe
Notify of
guest
0 Comments
Most Voted
Newest Oldest
0
Would love your thoughts, please comment.x
()
x