Kraft Paper: Strength, Yield And The Grammage You Order
Home
Yiwu, Zhejiang, China
Mon – Fri 9:00 AM – 6:00 PM · Sat 9:00 AM – 4:00 PM
[email protected]

What Is Kraft Paper: Strength, Yield And The Grammage You Order

Alan Xiao, Founder of Sourcing Pioneer
Alan Xiao Founder of Sourcing Pioneer
· Updated November 11, 2026 · 11 min read

Kraft paper is paper made by the kraft process. The cook strips most of the lignin out of wood chips and leaves long fibres behind. Brown is the unbleached version, and the word kraft is German for strength.

That is the definition. The buying decisions sit in two numbers behind it. The yield of the cook sets the price, and the grammage of the sheet sets the job it can do.

This article covers both, then lists the tests that belong on an order and the tariff line the paper arrives under.

Studio still life of a brown kraft paper roll and a folded kraft bag on a beige surface
Brown is not a colour choice. It is what the fibre looks like before bleaching.

The Name Means Strength

Kraft paper is paper or paperboard made from chemical pulp produced by the kraft process. In the trade it is also called brown paper, which describes the colour rather than the grade.

The strength is not a finishing step. It comes from what the cook removes. The material reference for kraft paper puts the reason plainly: the process removes most of the lignin in the wood, and lignin is hydrophobic.

That matters at the fibre level. Lignin coats the cellulose and blocks the hydrogen bonds that hold one fibre to the next. Strip it, and the sheet bonds to itself far better.

Two other routes leave more lignin behind. Mechanical pulping keeps most of it, and acid sulfite pulping degrades the cellulose as it works. Both give weaker paper from the same tree.

Strength is also why the name stuck. Kraft is the German word for strength, and English “craft paper” is a different thing that sounds the same. If a supplier quotes craft paper, ask which one they mean.

Two Hours At 170 Degrees

The cook is simple to describe and hard to run. Wood chips go into a pressure vessel with white liquor, which is sodium hydroxide plus sodium sulfide.

The charge runs 15 to 25 percent by weight on the wood. The digester heats the mixture to 170 °C, and holds it for roughly two hours depending on how far the delignification should go.

Those figures are the process description in the reference entry on the kraft process, and they explain a lot about the supply side.

A mill cannot switch grades the way a printer switches ink. Changing the cook, the wood mix or the bleach line takes time, and tonnage is lost in between. That is why small orders sit at the back of the schedule.

The liquor is also recovered and reused, which is why the process survived a century of energy prices. Sulfur compounds give the mill its smell, and the recovery boiler gives it its economics.

Brown And White Cost Different

Brown kraft is the sheet straight off the unbleached line. White kraft goes through a bleaching stage, and the bleaching stage costs more than the colour change suggests.

The yield is where the money hides. Unbleached kraft recovers 65 to 70 percent of the wood as pulp. If the pulp is headed for bleaching, the yield drops to about 50 percent, and after bleaching it can fall to 45 percent or less.

Read those three numbers as a wood bill. To make a tonne of white pulp you buy roughly half again as much wood. You also pay for the bleach and the effluent treatment.

That is the whole story behind the price gap on a shelf. A white kraft bag is not a brown bag with a different dye; it is a bag that consumed more tree per kilo.

Strength moves in the same direction. Bleaching removes a little more of the fibre’s own material, and the sheet that comes out is cleaner and slightly weaker than the unbleached one.

Unbleached (brown)Bleached (white)
Pulp yield65–70 %About 50 %, and 45 % or less after bleaching
ColourNatural brownWhite to cream
StrengthHigher, long softwood fibre intactSlightly lower after the bleach stage
Typical useBags, wrapping, linerboard, sacksWhite boxes, printed retail packaging, food wraps
Cost directionLower wood per tonneMore wood, plus bleach and effluent

So the greenest choice is usually the cheapest one. An unbleached sheet skips a whole process stage, and that stage is the one that costs wood, water and energy.

Unless the design needs white, the brown sheet is the better environmental answer and the better commercial one. The wider guide to eco packaging makes the same point about coatings, and it applies here too.

Grammage Is The Number On The Order

Grammage is the weight of one square metre of sheet, written g/m² or gsm. It is the first thing a paper mill asks for and the last thing a buyer checks.

Heavier is not automatically better. A heavier sheet carries more fibre, so it is stronger and stiffer. It also costs more per bag and ships more kilos for the same number of pieces.

Normal kraft paper sits between 40 and 135 g/m². Below that band the sheet is built for twisting and wrapping, and above it you are usually into paperboard territory.

GrammageWhat the sheet is built forWhat a buyer uses it for
30–40 g/m²Candy wrap and twisting paper, often flexo or offset printedLight wraps, small bags, void fill
40 g/m²Spinning kraft, high fibre orientation and cross elongationWinding, tape cores, narrow reels
40–135 g/m²Normal kraft, strong and fairly coarseGrocery bags, envelopes, general wrapping
60–80 g/m² outer, 80–120 g/m² bodyCartridge paper, high machine direction tensileHeavy wraps where the sheet is wound under tension

Sack paper is a different animal in the same family. It is porous, elastic and tear resistant, and it is microcreped so the sheet can stretch without breaking.

The microcrepe gives 4 percent elongation in the machine direction and 10 percent across it. That stretch is what lets a filled sack drop onto a pallet without splitting a seam.

So the second line of a paper order is not just a number, it is a spec with a direction. A 70 g/m² sack paper and a 70 g/m² kraft sheet for wrapping behave nothing alike.

What The Sheet Has To Pass

Paper is one of the few commodities where the test methods are standardised and cheap to run. Name the method on the order and the argument moves from opinion to a number.

Grammage, ISO 536. A weighed square metre. This is the check that catches a supplier sending 65 g/m² against an order for 70.

Tensile strength, ISO 1924-2. How hard you can pull the strip before it breaks, reported in machine and cross direction separately.

Tear resistance, ISO 1974. How much energy a nick needs to keep tearing. This is the number that predicts a split seam on a loaded bag.

Bursting strength, ISO 2758. How much pressure the sheet takes before it pops, which is the closest test to a bag landing on a corner.

Water absorption, ISO 535. The Cobb test: how many grams of water a square metre takes up in a set time. It decides whether a cold bag sweats through.

Air permeance, ISO 5636. How fast air passes through. Sack paper should breathe, and a coated sheet should not.

Six tests, six lines. Together they cost far less than one failed container, and they give the inspector something to measure. The one page spec a factory builds against is where they belong.

The Coating Decides Whether It Recycles

Bare kraft is a single material, and that is its main environmental advantage. A coating can take the advantage away.

Polyethylene is the usual barrier. It blocks moisture, grease and bacteria, and it does the job well, but it also fuses to the fibre and complicates the recycling line.

Zein, a maize protein, is the alternative that keeps most of the recyclability while staying water resistant. It costs more, and it is worth knowing the name when a supplier claims a green barrier.

Multi-layer sacks are the other place the claim breaks. Three plies of kraft are still kraft; add a plastic film and the pack is a laminate with a paper face.

Wet strength chemicals are a smaller version of the same question. They improve how the sheet behaves when damp, and they change how easily the fibre breaks down later.

Ask one question about every sack: what is between the paper and the product? If the answer is nothing, most of the environmental claim holds.

If the answer is a film, ask which polymer and how thick. A thin film on a paper sack is still the part that decides whether the pack goes into the paper stream or the general waste.

Bar chart of kraft pulp yield at 65 to 70 percent unbleached, about 50 percent for pulp to be bleached, and 45 percent or less after bleaching
Three yields, one wood bill. The white sheet bought more tree.

Where The Price Comes From

Four things move the price of a tonne of kraft paper, and only one of them is the wood itself.

The cook. A higher yield means less wood per tonne of paper, and that is the first lever. It is also the reason bleached grades sit above brown ones all year.

The fibre source. Softwood gives the long fibre that sack paper needs. Kraft can also take hardwood, bamboo and kenaf, and a mill that blends them will quote lower and behave differently under a tear test.

Virgin against recycled. Recycled fibre has already been through a paper machine once, and fibres shorten a little each cycle. The usual result is a sheet that needs more grammage for the same strength.

Freight. Paper is dense, so it is priced by weight and the pallet pattern decides how much air you ship with it. A roll that is slightly wider than the machine’s trim wastes money on every metre.

None of those levers is visible in a photograph. All four show up in a quotation, which is why the sheet has to be read line by line.

The Tariff Line Says Unbleached

Customs splits kraft paper by weight and by whether it was bleached, and the split is friendly to the brown sheet.

Heading 4804 covers uncoated kraft paper and paperboard. Under 4804.31, which is the unbleached group not over 150 g/m², the lines I read in the tariff carry a general rate of Free.

That covers 4804.31.10.00 at 15 to 30 g/m² and 4804.31.20.00 for other weights. The other column, which applies when a country has no normal trade status, is 20.5 and 25 percent.

Wrapping paper and bag or sack paper sit at 4804.31.40, also Free, with 30 percent in the other column. Your broker picks the statistical line; the group is what matters at quotation stage.

Two consequences follow. A bleached sheet does not sit in the same place in the schedule. A coated or laminated sack may leave 4804 altogether for a converted product heading.

That last point is worth a question before the first order. The duty is decided by what the article is, not by what the supplier calls it on the invoice.

Reading A Quotation

Kraft quotations usually arrive as a price per tonne and a grammage. Those two numbers leave out the tests, the coating and the tolerance.

What the quote saysWhat to askNumber to record
70 g/m² kraftTolerance on grammage, and tested how?g/m² plus or minus, by ISO 536
Strong sack paperTensile and tear, in which direction?ISO 1924-2 and ISO 1974 results, machine and cross
Food gradeWhich barrier, and is it on the inside?Coating type and coat weight
100 % recyclableIs there a film anywhere in the pack?Polymer, thickness, and where it sits
Brown or whiteBleached, unbleached, or recycled furnish?Grade name and yield class
FOB price per tonneRoll width against the trim, and pallet countWidth in mm, rolls per pallet, gross weight

Six Lines For The Order Sheet

Six lines make a paper order testable. Each one is a number or a method, and none of them needs a laboratory on your side.

One. Grade and colour: unbleached kraft, bleached kraft, or a stated recycled content, with the furnish named.

Two. Grammage with a tolerance, measured by ISO 536.

Three. Strength: tensile and tear by ISO 1924-2 and ISO 1974, in both directions.

Four. Barrier: none, PE, zein or another named coating, with coat weight and which face it sits on.

Five. Roll or sheet: width, diameter, core size, and the trim allowance on the width.

Six. Packing and documents: pallet pattern, gross weight, and the tariff line printed on the invoice.

Put the same six lines on the inspection order, and check the grammage of the delivered reel against the sample reel. The pre-shipment check on the delivered reel can only confirm what the sheet names.

The format matters as much as the content. A paper mill works from a grade code plus figures. The material choice behind the pack has to be written out, not described in adjectives.

Six line order card for kraft paper covering grade, grammage, strength, barrier, roll size and packing
Six lines, six numbers, one page in the carton.
GRADE CHECK

Send a kraft paper quotation or a sample reel photo. I will check whether the grammage carries a tolerance, whether the barrier is on the right face, and how the roll width sits against your trim. No cost, no obligation.

Check My Grade

Questions Buyers Ask

Is kraft paper the same as brown paper?

In everyday use, yes. Kraft is the process, and brown is the unbleached colour it normally has. The same process also makes white kraft after bleaching.

Why is white kraft more expensive?

Yield and process. Unbleached kraft gets 65 to 70 percent of the wood into pulp, and pulp headed for bleaching lands near 50 percent before the bleach stage pulls it lower again.

Is kraft paper recyclable?

Bare kraft recycles well, because it is one material. A PE-coated sack is a laminate, and the film is the part that decides whether a mill wants it.

Is it stronger than recycled paper?

Usually, at the same grammage. Virgin softwood fibre is longer, and recycled fibre shortens with each cycle, so a recycled sheet often needs more weight for the same strength.

What grammage should I order for a grocery bag?

Most grocery bags sit inside the normal kraft band of 40 to 135 g/m². The right figure depends on the load and the handle, so fix it with a tensile and tear result, not a guess.

What duty does it carry into the United States?

Unbleached kraft under 4804.31 is Free on the lines read, including the bag and sack paper line at 4804.31.40. A bleached or coated product can land on a different line, so let the broker confirm.

Questions & Comments

We read every one and reply within 24 hours

If a kraft paper quotation crosses your desk, send it over with the grammage and a photo of the reel edge. I will check the tolerance, the barrier and how the roll width sits against your trim.

0
Would love your thoughts, please comment.x
()
x