Private Label Clothing: The Pattern Is the Product
A private label garment order is a pattern, a grading table and a label that belong to you. The cloth and the sewing are the easy part.
The label is the smallest item in the order. It is also the one most buyers think about first.
The pattern is the largest decision, and the one most buyers never ask about. That gap is where repeat orders go wrong.
This page follows a garment from the label to the cloth. It covers the three label builds, the three floors behind a minimum, the five steps to bulk, and the four cost blocks. It ends with the label rules a US buyer has to meet.
The Short Answer
A private label garment is made on a pattern that you paid for, in a fabric you chose, with your name sewn in. The factory makes it because you asked, not because it sits in a catalogue.
Three things belong to you when the order closes. The pattern, the grading table and the label artwork. The rest can be replaced.
A white label garment works the other way. The factory designed it, sells it to anyone, and sews your name in at the end.
The cost of the first route sits in the setup, before a single unit is made. The cost of the second sits in the unit price, on every order.
Most buyers start on the second route and move to the first once a style sells. That order is sensible. It is also where most of the cost mistakes happen.
The Label Is Three Different Products
A buyer says “put my label in it” and means one of three things. The factory usually picks the cheapest, and nobody says which one was chosen.
A woven label is cloth. A loom weaves the letters into the tape, so the type cannot rub off. It needs a plate charge and a loom minimum, and the tape is cut and folded in the factory.
A printed label is ink on tape. It is cheaper to set up and cheaper per piece. The print sits on the surface, so it wears at the fold.
A heat transfer is a film pressed onto the cloth. There is no tape at all. It is the cheapest of the three and the first to fail after repeated washing.
| Build | How the name is made | Cost shape | Wash life |
|---|---|---|---|
| Woven | Letters woven into tape on a loom | Plate charge plus a loom minimum in metres | Survives the garment |
| Printed | Ink applied to a plain tape | Screen charge plus a low tape minimum | Wears at the fold first |
| Heat transfer | Film pressed onto the cloth | One setup, no tape, lowest unit cost | Lifts at the edge after many washes |
| Printed care tape | Ink printed on the same tape as the size | Shared with the care line | Depends on the ink |
The woven route carries the highest setup and the lowest risk. A shop that sells a garment for two years will read the label a hundred times, and a woven tape still looks new.
Ask which build the quote covers. A quote that names no build is quoting the cheapest one, and the sample may arrive with a different one.
Three ways to fix a name to a garment compares them by finish, and by what each one does to a return.
What You Own, and What You Only Rent
Four items decide whether the second order looks like the first. Most buyers check none of them before paying.
The first is the pattern. It is the block the cloth is cut from, held as paper or as a digital file. A factory that keeps the file controls your repeat order.
The second is the grading table. It lists every measurement in every size, with a tolerance on each one. Without it, each size is made by eye.
The third is the marker. It is the layout that decides how much cloth is wasted. A tight marker can move the price by a few percent on a wide size range.
The fourth is the colour reference. Ask for the physical standard the factory will match against, not a screen image. A screen cannot be matched in a dye house.
Ask for all four on payment, in writing. A factory that will not hand over the grading table has told you what the second order will be like.
The distinction that decides who owns the design is worth reading before you pay for a pattern, because paying is not the same as owning.
The measurement half fits on one page per style. The measurement sheet the factory signs is the document that travels with the style when you change supplier.
The Three Floors Behind a Minimum
Every quote carries one minimum order figure. That figure is the highest of three separate floors, and the quote rarely says which one is binding.
The first floor comes from the fabric. A mill dyes by weight, so a colour that is not in stock starts at a weight in kilograms. That weight becomes a number of garments before any sewing begins.
The second floor comes from the colour count. Three colours across one style are three short runs, not one long run. The total can look healthy while each colour sits under the floor.
The third floor comes from the size spread. Cutting a 3XL for six pieces wastes cloth on the marker. A wide range pushes the minimum up without anyone mentioning it.
| Floor | What sets it | What to change if it is too high |
|---|---|---|
| Fabric weight | A dye lot for a colour not in stock | Take a stock colour, or a stock weight |
| Colour count | Each colour is a separate run | Cut the palette to two colours |
| Size spread | The marker gets wasteful at the extremes | Drop the two outer sizes for the first run |
Ask which of the three is binding. The answer tells you what to change. Most buyers try to bargain on the number when the answer sits in the fabric.
A heavier cloth raises the same floor again, because the mill sells by weight and a 240 gram cloth needs more of it. What a heavier cloth does to the price explains the figure on the quote.
Once you know the binding floor, the negotiation has a target. Which floor the minimum is standing on sets out the wording to ask for before the price is agreed.
From Tech Pack to Bulk: Five Steps
A private label garment does not start at the sewing line. It starts as a document, and each step after it costs more than the last.
Step one is the tech pack. It holds the drawing, the measurements, the seams and the trims. A thin pack means the factory guesses, and a guess costs a sample round. The file a factory prices from is what that step has to contain.
Step two is the pattern. The block is drafted from the tech pack, then cut in cheap cloth to check the shape. Expect one to three attempts on a first style.
Step three is grading. The base size is scaled to the rest of the range and checked on a fit model. Skipping this is how a range ends up with one good size.
Step four is the sample. The first round proves the shape. The second proves the fabric, the colour and the label. The third is made by the line that will run the order.
Step five is bulk. Fabric is bought, the marker is laid, and the line runs. Everything committed in the first four steps is now hard to change.
The order of these steps is why a first sample is cheap and a first bulk run is not. A mistake at step two costs a sample. The same mistake at step five costs the cloth.
Each step should end with something signed. A pattern with a date, a grading table with tolerances, a sample with a seal. A step that ends in a phone call ends twice.
Five steps also means five chances to check who owns what. What a factory actually owns before it quotes is the set of questions that belongs at step one, not at step five.
The grading table is where a range is won or lost. The conversion between an Asian label and a US one matters most at the extremes of that table.
What a Private Label Order Costs
A garment quote is four blocks added together. When two quotes for one style differ by a third, the gap sits in one block, not in all four.
| Block | What it covers | When it is paid |
|---|---|---|
| Pattern and grading | The block, the scaled table, the marker | Before the first sample |
| Sample rounds | Cloth, labour, freight and any rework | Per round, before it ships |
| Labels and trims | Tape, plate charge, zip, cord, bag | With the first bulk order |
| Bulk production | Fabric, cut, sew, finish, packing | Deposit, then balance |
The first block is the one buyers try to skip. It is also the only block that makes the next four cheaper, because a factory that has the pattern does not have to guess.
The label block is small in money and large in risk. A tape that fails at the fold turns a good garment into a second, and the fix is a full relabel.
Ask for the four blocks as separate lines, even when one price is offered. A single number cannot be compared with another single number if neither says which fabric weight or which tape it covers.
Packing is the block people forget, and it hides the fold standard and the carton ratio. Both are cheap to fix at the quote and expensive to fix at the port.
Where the Label Meets the Law
The factory prints the label. You own what it says. That split is the same in every apparel category, and it is the one duty that travels with the goods.
In the United States, fibre content is covered by how each fibre has to be named. The part names each fibre and the tolerance on a stated share.
Two details in that part catch importers. A fibre under five percent is written as other fiber, and the content line has to be in English.
Care instructions sit in what a care line has to be based on. The seller needs a reasonable basis for the instruction before the item is sold, not after.
Origin is the third line. The country of origin rules at 19 CFR part 134 decide what the label has to say and how visible it must be.
For a garment, all three lines sit on the same small tape. A private label brand carries all three under its own name, and a missing line is the brand’s problem at the border.
Keep the label artwork with its revision number beside the grading table. A label that changes between orders is a question from a buyer, and an answer you cannot give without the file.
Private Label and White Label, One Table
The two routes differ in four places. Each one changes what you can do with the product in year two.
| Question | White label | Private label |
|---|---|---|
| Who drew the garment | The factory | You, on your pattern |
| Who else can buy it | Anyone the factory sells to | Nobody, if the contract says so |
| What the minimum is set by | The stock run | Fabric, colour and size floors |
| Where the money sits | The unit price | The setup, then a falling unit price |
The practical difference is the repeat order. A white label repeat is a phone call. A private label repeat runs on a pattern that only you and the factory hold.
That is also the risk. If the factory holds the pattern and the table, the second order is a white label order with extra steps.
Five Questions Before You Pay for a Pattern
These five are ordered so that each answer removes a way to lose money later. All five belong in writing before a deposit.
First, will the pattern file come to me? Ask for the digital file, the grading table and the marker, with a date. A verbal yes is not a file.
Second, which label build is in this price? Woven, printed or transfer. The sample must carry the same one.
Third, which floor is the minimum standing on? Fabric weight, colour count or size spread. The answer tells you what to change.
Fourth, how many sample rounds are included? One round is not enough for a first style. Ask what a fourth round costs before you need it.
Fifth, will you sign the sample? A signed and dated sample turns a colour argument into a measurement. A factory that will not sign has told you how the bulk will be judged.
Questions Buyers Ask About Private Label Clothing
What is private label clothing?
A garment made on a pattern you paid for, in a fabric you chose, with your label sewn in. The factory makes it to your order rather than from its own catalogue, and the design is yours if the contract says so.
What is the minimum order for private label clothing?
There is no single figure. The minimum is the highest of three floors: the fabric weight for a custom colour, a count per colour, and a count per size. Ask which one is binding, because each one is lowered a different way.
How long does a private label clothing order take?
Plan on four to eight weeks after the sample is signed, plus two to four weeks for the pattern and the first sample. A new style with a custom colour sits at the top of that range, because the dye lot comes first.
Do I own the pattern after I pay for it?
Only if the contract says so and the file is handed over. Paying for a pattern is not the same as owning it. Ask for the digital block, the grading table and the marker on payment, and keep your own copy.
What is the difference between private label and white label clothing?
A white label garment is designed by the factory and sold to many brands, who add their name. A private label garment is made to your pattern. The label looks the same in a shop. The asset behind it is not.
What must a private label clothing label say?
In the United States, fibre content under 16 CFR part 303, care instructions under 16 CFR part 423, and country of origin under 19 CFR part 134. A brand carries all three under its own name, so the artwork is worth keeping with a revision.
The Bottom Line
A private label garment is not a logo on a stock item. It is a pattern, a grading table and a label build that you paid to create and, if the contract is right, own.
Get those three in writing before the deposit. The cloth is easy to replace. A pattern you cannot take with you is not.
Send the Style and the Quote
Send the style, the tech pack and any quote you hold. We will check which label build is inside the price, name the floor your minimum is standing on, and say whether the pattern and the grading table would come to you on payment.
Send the Style
Questions & Comments
We read every one and reply within 24 hoursOrdered a private label run and found the factory kept the pattern? Tell us the style and what the contract says. We will say who holds the grading table.