Embroidery vs Screen Printing: What the Order Actually Decides
Embroidery is priced by stitches. Screen print is priced by colours and screens. Those two cost engines explain almost every quote you will get.
One method adds thread to the cloth. The other pushes ink into it. Everything that follows, from the artwork you can use to the care label you must print, comes from that difference.
The Short Answer
Screen print wins on flat, bold, few-colour artwork at volume. Embroidery wins on small logos, textured cloth and a mark that cannot peel.
The crossover is not one number. It moves with colour count, artwork size and garment weight.
Ask two questions before you choose. How many colours does the artwork use, and how many pieces will you run?
Then add a third. What does the garment do to the method, because a thin knit and a heavy fleece are not the same canvas.
Five Ways to Put a Mark on a Shirt
Screen print and embroidery are the two this page is named for. Three others sit between them, and a quote often mixes two of the five.
| Method | How it bonds | Where it wins | Where it fails |
|---|---|---|---|
| Screen print | Ink pushed through a mesh, then cured | Bold shapes, one to three colours, volume | Gradients, tiny type, short runs |
| DTF transfer | Printed film pressed onto the cloth | Full colour, small runs, photos | Heavy texture, high heat cloth |
| DTG direct | Ink sprayed into a pre-treated surface | Photos on cotton, one-off pieces | Polyester, uneven pretreatment |
| Embroidery | Thread stitched through the cloth | Small logos, caps, heavy knits | Fine detail, thin jersey, large areas |
| Sublimation | Dye turns to gas and enters the fibre | All-over print on polyester | Cotton, dark grounds |
Ask which of the five the quote covers. A supplier who answers “printing” to all five questions has not priced your job yet.
Keep the five names on one page when you talk to a plant. A name is a price engine, and a plant will quote the one it owns.
A plant with a screen line and a stitch line can bid both. One with a print head only will push you toward print.
What You Pay Before the First Shirt
Each method has a fixed cost that lands before any garment is touched. That cost is what makes a short run expensive.
Screen print needs one screen per colour. Three colours mean three screens, three registrations and three chances to drift.
Embroidery needs a digitised file. A digitizer converts your artwork into stitch instructions, and a bad conversion shows up as a dense, stiff patch.
DTF needs a printed film per design. DTG needs pretreatment liquid and a print head that is set up for your cloth.
Ask for the setup line on its own. A quote that folds setup into the unit price cannot be compared with one that does not.
Ask whether the screen or the digitised file is kept. A file on the plant’s server is a reorder; a file you hold is a reorder anywhere.
Where the Two Curves Cross
Fixed cost divided by quantity is the arithmetic that decides most jobs. Setup stays still while the unit price falls.
Take a screen setup and an embroidery digitising fee as two fixed numbers. At 24 pieces both sit heavy on each shirt. At 500 they almost vanish.
Unit cost moves the other way. A screen print unit is usually cheaper than an embroidered unit at the same size, because thread and machine time cost more than ink.
So the two lines cross. Below the crossing, the method with the lower setup wins. Above it, the method with the lower unit cost wins.
Do the sum with your own quotes. Ask each supplier for the setup number and the unit number at two quantities, then divide.
The logo guide for hard goods runs the same arithmetic on metal, wood and plastic, where the setup rules differ.
What the Artwork Allows
Screen print wants flat colour and clean edges. A gradient becomes a series of bands, and a fine line can close up in the mesh.
Embroidery wants shapes, not detail. Very small lettering fills with thread, and a thin stroke disappears under the stitch.
Ask for the minimum letter height in millimetres before you approve artwork. Then ask for a stitched sample of your smallest word.
DTF and DTG carry photographs and soft shading. That is their advantage, and it is also why a quote for “a printed logo” can describe three different results.
A design that works in all four is rare. Choose the method first, then redraw for it.
Ask for the art at the size it will run. A mark drawn at 300 mm looks calm on a screen and coarse on a shirt.
Ask what the plant does with a thin line. Some thicken it, some drop it, and only one of those is written down.
Placement Changes the Method
A large back print suits screen or DTF. An embroidered back panel is heavy, slow and expensive per piece.
A left chest logo is the natural home of embroidery. It is small, it carries a name, and the thread reads at a distance.
Sleeves and cuffs are tight curves. Screen print needs a platen that holds the tube; embroidery needs a hoop that fits without stretching the cloth.
A seam is a problem for every method. Embroidery stitched across a seam puckers, and a transfer pressed over one lifts at the ridge.
Placement tolerance belongs in the order. Give a measurement from a fixed point, such as the shoulder seam, and give a tolerance in mm.
What the Cloth Does to the Method
A thin single jersey is a weak canvas. Dense stitching pulls it into a puckered ring, and a heavy ink layer makes it stiff.
A heavy fleece or a pique polo holds both. The stitch sits flat, and the ink does not change how the garment falls.
Ask for the cloth weight in grams per square metre before choosing a method. Then ask the plant which method it uses on that weight.
A blend changes the answer again. DTG needs a cotton surface, and polyester takes sublimation but not a water-based ink.
Ask for a test piece on the actual cloth, not on a swatch of something similar. A print approved on a flat sample can fail on a ribbed collar.
A dark cloth needs a light thread for a mark that reads. A light cloth needs a dark one, and a mid grey needs either with a thin outline.
Ask for the thread card at the sample stage. A colour picked from a screen is a guess with a number on it.
The fibre and knit behind the shirt decides which of these methods will hold.
What Fails First, Method by Method
Screen print fails at an edge. The ink film lifts where the cloth bends, and a thick layer cracks before a thin one.
DTF fails at a seam or a hem. The film cannot follow a tight curve, so it lifts there first.
DTG fails as a fade. The colour washes out unevenly, and a dark ground shows it soonest.
Embroidery fails as a loose thread or a pulled stitch. The mark itself outlives the garment, which is why it is chosen for uniforms.
Sublimation does not sit on the surface, so it cannot peel. It can still dull if the fibre is wrong.
The list is not a ranking. It tells you where to look when a return comes back, and which line to write into the order.
Run a Wash Test Before the Bulk
A wash test is cheap and it settles the argument. Take three decorated pieces and wash them as your customer would.
Use the temperature and the drying method you intend to print on the care label. A test at a gentler setting proves nothing.
Add a rub test. Rub the mark with a white cloth, dry and then damp, and look for colour on the cloth.
Photograph each piece before and after. A photo of a lifted edge ends a discussion that a description cannot.
Ask the plant for its own test record. A factory that has never tested a print has no evidence to give you, and that is the finding.
Keep the record with the order, not in a folder on a desk. A claim six months later needs the sheet from the day the piece was washed.
Write the date, the setting and the result. Three lines on one sheet are worth more than a long claim about quality.
An inspection that pulls three pieces from the line is where a decoration fault is still fixable.
The Care Label Is Part of the Job
A decoration changes how a shirt must be washed. That makes the care instruction a claim you have to support.
In the United States the rule sits at the care labelling rule for wearing apparel, 16 CFR Part 423.
Section 423.6(c) asks the seller to hold a reasonable basis for the care information, established before the sale.
The rule lists what counts. Reliable evidence that the product survived the stated care, evidence that it failed a warned method, or test evidence on a fair sample.
A print that cracks at 40 degrees turns “machine wash warm” into a claim you cannot defend. The wash test is the evidence.
Ask who writes the care instruction. If the answer is the factory, ask what test sits behind it.
Ink, Thread and Skin
Decoration sits against skin on a neck label, a chest print or an inside seam. Chemistry matters more there than on an outer panel.
The STANDARD 100 test scheme checks textiles against a list of over 1,000 harmful substances.
It splits products into four classes by skin contact. Class 1 covers articles for children up to three years and carries the strictest limits.
A certificate is issued for one year and names the article tested. Ask for the certificate, and check that your cloth and your print are inside its scope.
A supplier who says “OEKO-TEX” without a certificate number is describing a hope, not a test.
What to Write on the Order
Each method has its own line items. A single sentence saying “logo printed” gives the plant room to choose for you.
| Method | Lines the order needs |
|---|---|
| Screen print | Colours by number, mesh count, ink type, cure temperature, placement and tolerance |
| DTF | Film type, press temperature and time, pressure, peel stage, placement |
| DTG | Pretreatment, ink set, print size in mm, cloth and colour of the ground |
| Embroidery | Stitch count, thread colour, backing, minimum letter height, placement |
| Sublimation | Fibre content, transfer paper, press temperature and time, colour target |
Add one line that covers all five. Name the test the piece must pass, and say that a piece which fails it is rejected.
How to Compare Two Quotes
Put the setup and the unit price in separate columns. A total for 300 pieces hides which half is doing the work.
Ask for the unit price at two quantities. The pair shows whether the plant is charging for the run or for the setup.
Ask what the quote excludes. Screens, digitising, films, samples and test pieces are the usual omissions.
Ask for the sample lead time on its own. A decoration sample needs its own slot, and it is the step that slips at peak season.
Ask when the line is free, not when the plant is free. A quote that names a ship date without a line slot is a wish.
The supplier types behind a decorated tee own different parts of this list, and only one of them will quote a custom decoration.
Questions Buyers Ask About Embroidery and Screen Print
Is embroidery more expensive than screen printing?
Per piece, usually yes, because thread and machine time cost more than ink. At small quantities the setup can flip that, since one screen per colour costs less than a digitised file on a 30 piece run.
Can I put embroidery on a thin T-shirt?
Yes, with a backing and a lighter stitch count. Dense stitching on a thin jersey pulls the cloth into a puckered ring, so ask for a test on the real shirt first.
How small can embroidered text be?
Ask the plant for its minimum letter height in millimetres, then ask for a stitched sample of your smallest word. Very small lettering fills with thread and stops being readable.
Does screen print work on polyester?
It can, with the right ink and cure. The common failure is dye from the cloth bleeding into the print during curing, so ask the plant how it controls that.
Which method survives industrial washing?
Embroidery lasts longest, because the thread is sewn through the cloth. A print depends on its ink, its cure and the edge of the design, and a wash test is the only proof you will get.
Do I need a new setup for a reorder?
Only if the screen, the film or the digitised file was discarded. Ask at the first order who keeps it, and write the answer into the agreement.
The Bottom Line
Pick the method from the artwork and the quantity, then check it against the cloth. The quote follows that order, not the other way round.
Then test one piece and write the result into the care label. A decoration that cannot be washed the way you promised is a return with a date on it.
Send the Artwork
Send the artwork and the shirt it goes on. We will quote screen and embroidery on the same quantity, test one piece through a wash, and put the result in writing so the care label matches what the garment can take.
Send the Artwork
Questions & Comments
We read every one and reply within 24 hoursPrinting or embroidering a shirt and not sure which one to order? Tell us the artwork size, the colour count and the cloth. We will say which method the cloth can take and what to test first.