Custom Jewelry Pouch: Size, Colour Fastness, And The Drawstring
A custom jewelry pouch is a drawstring bag with your logo.
It is the cheapest item in the parcel and the first one the customer touches. That combination is why it decides how the rest of the order is judged.
The bag does three jobs. It keeps a chain from scratching, it presents the piece when the lid opens, and it carries the brand after the box is thrown away.
This article covers the size arithmetic, the test that predicts a stained chain, and the four ways a logo goes on.
What The Bag Actually Is
The standard article is a flat bag with a channel at the mouth and a cord running through it. Pull both ends and the mouth closes.
Two details separate a good one from a cheap one. The closure is a double cord rather than a single loop, so the mouth gathers evenly instead of bunching on one side.
The edge is scalloped or straight. A scalloped edge is cut with a die, and that costs a step. A straight edge is cut with a hot blade and sealed as it is cut.
Everything else is fabric, size and print. Those three are where the money and the returns sit.
Size Is Reversed Out Of The Goods
Most buyers start with the bag. The bag should start with the item.
Take the largest piece in the range and measure its longest diagonal, not its length. A chain folded twice is a bundle, and the bundle is wider than the chain.
Add a margin so the bag closes without stretching. A pouch that is filled to the seam looks cheap in a photograph, and the seam takes the load.
Then remember that a pouch is measured flat. Fill it and the usable height drops, because the mouth gathers and the base rounds out.
The trade works in centimetres, and the ladder below covers almost every listing. One common promotional size, 4.7 by 6 inches, is about 12 by 15 centimetres.
| Flat size | Holds | Typical use |
|---|---|---|
| 7 × 9 cm | A single ring or a pair of studs | Ring and earring retail |
| 9 × 12 cm | A bracelet, or a small pendant | The default jewelry size |
| 10 × 15 cm | A chain, folded once | Necklace retail |
| 13 × 18 cm | A chain with a box, or two pieces | Gift sets |
| 20 × 30 cm | A watch box, or a small bag | Multi-piece sets |
This ladder matches what factories publish: the range runs from 7 by 9 centimetres up to 20 by 30, and everything between is cut to order.
Six Fabrics, Six Behaviours
Velvet is the default for jewelry because it holds a shadow and makes a small piece look expensive. It is also the fabric most likely to shed fibre onto a fitting.
Suede, real or faux, has a shorter pile. It photographs well and shows handling marks sooner than velvet.
Microfiber is the practical choice. It is dense, it wipes, and it does not mark when the bag is folded in a drawer.
Satin and organza are for presentation, not protection. Both are thin, both snag on a prong setting, and both are chosen for the look of the unboxing.
Cotton and canvas are the printable option. They take a screen print cleanly and they suit a brand that sells on being plain.
| Fabric | Hand | Protects | Where it fits |
|---|---|---|---|
| Velvet | Deep pile, rich | Well | Fine jewelry, gift sets |
| Suede, faux | Short pile, matte | Well | Everyday retail |
| Microfiber | Dense, flat | Very well | Travel, repeated use |
| Satin | Smooth, glossy | Poorly | Presentation only |
| Organza | Sheer, crisp | Poorly | Wedding favours |
| Cotton, canvas | Dry, matte | Fairly | Printed branding |
One more variable sits inside each row: weight. A heavier velvet at the same size costs more and closes better, because the mouth has body to gather.
That is why two quotations for a “velvet pouch, 9 by 12” can differ by half. The word velvet covers a range, and the weight per square metre is the part that was left out.
The Colour That Rubs Off
A black pouch against a pale gold chain is a slow transfer. The pile holds dye, the metal is soft, and every time the chain moves the dye has another chance.
The failure arrives as a grey smudge on a pendant, and the customer blames the plating. The pouch did it.
There is a test for exactly this. ISO 105-X12 measures colour fastness to rubbing with an instrument called a crockmeter.
The machine rubs the fabric with a standard white cloth, once dry and once wet. A technician then compares the stained cloth against a grey scale and records a rating.
Ask for both numbers. A dark pouch can pass dry rub and fail wet rub, and wet is the case that matters when a customer’s hands are damp.
Two things reduce the risk before a test is run. Rinse the dyed fabric properly, and avoid the cheapest black on the darkest pile.
The Lining Question
Silver darkens in air, and a pouch is a small closed volume of air. Some ranges answer that with a lining treated to absorb the gases that tarnish silver.
The claim is worth checking rather than assuming. Ask what the lining is, how long it works, and whether it survives washing or folding.
For most orders the honest answer is that the pouch is protection, not chemistry. A silver piece that sits in a drawer for a year needs a sealed bag or a tarnish strip, not a velvet pouch.
What a pouch can do is avoid the two mechanical causes of damage: abrasion against other pieces, and the chain tangling on itself.
The Cord, The Channel, The Fray
The channel is the folded strip of fabric at the mouth. Its width has to fit the cord with a little slack, or the bag will not gather.
Too tight and the mouth fights the hand. Too loose and the cord pulls the fabric into a bunch instead of a fold.
The cut end of the cord is the second detail. A hot-cut ribbon seals its own edge. A plain cut cotton cord frays from the first pull and leaves a whisker on the jewellery.
The cord also needs an end treatment: a knot, a bead, or a small metal cap. A knot is cheapest and works until it works loose.
Cord length is worth writing down as well. A cord that is too short will not open wide enough to take the item. One that is too long pools in the hand and looks untidy on a counter.
Double cord is the standard for a reason. Two ends pulled in opposite directions close the mouth symmetrically, and symmetry is what the unboxing photograph needs.
Four Ways To Put A Logo On
The print method changes the look, the durability and the minimum. Factories quote the usual three on velvet: hot foil, screen print and embroidery, and some add debossing to that list.
Hot foil presses a metallised film into the pile. It gives the crisp gold or silver mark most jewelry brands want, and it needs a metal die per design.
Screen print lays ink on the surface. It handles a flat colour and a fine line better than foil, and it needs a screen per colour.
Embroidery stitches the mark. It survives handling best and reads as craft, and it needs a digitised file before a single bag is run.
Debossing presses the pile flat without colour. It is the quietest option and the hardest to photograph.
Every one of those carries a one-time setup. One factory states it plainly: the print is priced once, when the plate or screen is made. Each bag then carries the impression at almost no added cost.
That sentence is the whole economics of the item. A buyer who compares bag prices without separating the setup will pick the wrong supplier and then wonder why a reorder looks cheaper.
Four Blocks In The Price
Fabric. Area times weight per square metre. A pouch is small, so the fabric is a few cents; the weight is what makes one quote double another.
Making. Cutting, sewing the sides, folding the channel, threading the cord. On a small bag the labour is a larger share than the cloth.
Print setup. One die, one screen, or one embroidery file. It is paid once and amortised across the run.
Packing. A poly bag, a hang tag, a barcode sticker, and the carton that ships them, which is the carton whose size decides the freight.
Put a number on it. A print setup quoted at 120 dollars sits on every bag in the run: 0.40 on a 300-piece order, and 0.04 on a 3,000-piece order.
That is the arithmetic behind a reorder that suddenly looks cheaper. Nothing improved; the setup is simply spread thinner.
Ask for the setup as a separate line. It is the only way to compare a 300-piece run with a 3,000-piece run honestly.
What Actually Sets The Minimum
The bag itself has a low minimum. Marketplaces list tiers at 50, 100, 200 and 300 pieces for a printed pouch, and a factory will cut a stock colour at that scale.
The minimum climbs with three things: a custom-dyed fabric, a multi-colour print, and a non-standard size that needs a new cutting die.
So the practical route for a first order is a stock colour, one print colour, and a size the factory already cuts. Custom colour comes on the reorder, when the shape is proven.
If the pouch has to match a box exactly, solve the pair together. The box that ships beside it has its own minimums and its own lead time.
Five Checks At Goods-In
Flat size on ten pieces, because a bag cut two millimetres narrow will not take the item it was ordered for.
Weight per square metre of the fabric, by cutting a small square and weighing it. This is the check that catches a downgraded cloth.
Crock on the darkest colour, dry and wet, against a white cloth.
Cord by pulling both ends hard and looking for fray at the cut and slippage at the knot.
Print by eye for registration, and by fingernail for adhesion. Foil that lifts under a nail will not survive a customer.
Keep one approved pouch sealed and labelled as the reference. Size, colour, cord length and print position are all judged against it, which ends most arguments about a shade or a millimetre.
Where the run is large enough to justify it, the count and the crock check happen before the cartons close.
Six Lines For The Order Sheet
One. Flat size in centimetres, with a tolerance, and the size of the largest item it must hold.
Two. Fabric, colour, and weight per square metre. “Velvet” alone is not a specification.
Three. Edge: scalloped or straight, and whether the straight edge is hot-cut.
Four. Cord: material, width, double or single, and the end treatment.
Five. Print: method, colours, artwork file, position and size in millimetres, plus the setup cost as its own line.
Six. The tests: crock dry and wet, size tolerance, print adhesion, and the sample that both sides keep.
The sample is the other half of the sheet. A pouch approved by photograph is not approved at all, because pile, weight and shade all read differently on a screen.
Ask for two physical samples: one to keep sealed, and one to handle until it fails.
Six lines fit on a spec sheet with numbers on it, and that sheet is what a second order is checked against.
Send a pouch quotation or a sample photo. I will check the flat size against the goods, the fabric weight, the cord and end treatment. Then I will ask for the dry and wet crock figures. No cost, no obligation.
Check My PouchQuestions Buyers Ask
What is the standard size for a jewelry pouch?
Most jewelry lines settle on 9 by 12 cm for earrings and pendants, and 10 by 15 cm for a chain. Factories cut from about 7 by 9 cm up to 20 by 30 cm, so the size follows the goods rather than a standard.
Which fabric is best for a custom jewelry pouch?
Velvet for presentation, microfiber for protection and repeated use. Satin and organza are chosen for the look of the unboxing and protect the piece least, because both snag on a prong setting.
Will a dark pouch stain my jewelry?
It can, if the dye is loose. The test is ISO 105-X12, run dry and wet against a white cloth, and the result is a grey-scale rating. Ask for both figures before approving a black or navy run.
How is a logo applied to a velvet pouch?
Hot foil, screen print, embroidery or debossing. Foil gives the crisp metallic mark, screen print handles fine lines, embroidery survives handling best, and debossing presses the pile flat without colour.
What is the minimum order for a custom pouch?
Marketplaces list tiers at 50, 100, 200 and 300 pieces for a printed pouch in a stock colour. A custom-dyed fabric, a multi-colour print or a new size die each raise that minimum.
How much does a custom jewelry pouch cost?
It depends on fabric weight, size, cord, print method and quantity, and the price is dominated by labour and setup rather than cloth. Ask for fabric, making, print setup and packing as four separate lines.
Questions & Comments
We read every one and reply within 24 hoursIf a pouch quotation or a sample photo crosses your desk, send it over. I will check the flat size against the goods, the fabric weight, the cord and the print setup.