What Is A Desiccant: Types, Units, And How To Specify One
A desiccant is a material that pulls water vapour out of the air inside a sealed space.
It does not dry a product. It holds the air around the goods at a lower moisture level, so they stop taking water in.
That difference explains most of the arguments about them. A buyer asks for “enough packets”. A supplier quotes grams. Neither number tells you whether the carton will still be dry in week six.
This article covers what the material actually does and the unit system the trade uses to size it. It also covers which type fits which cargo, and the six lines for an order.
The Short Answer
They work by one of two routes. Adsorption holds water on the surface of a porous material. Absorption takes it into the body of the material.
Most packing types are adsorbents. Silica gel, clay and molecular sieve are porous solids with a huge inner surface, and water sticks to it.
The material keeps working until it approaches saturation. Then the moisture inside the pack climbs again, and the cargo is back where it started, only later.
So a packet is a limited store, not a machine. Its room to hold is fixed at the moment it is sealed. Everything after that is a race between how fast water enters and how much the reservoir can hold.
Two results follow, and both are ignored in most quotes. A bag that sat open on a bench before packing has already spent part of its room to hold. And a package with a poor barrier will exhaust any bag you put in it.
What It Is Not
Three nearby products get confused with a packet, and the mix-up costs money because each solves a different problem.
Not a dehumidifier. That unit dries room air and runs on power. A packet works once, inside a closed space, with no power.
Not an absorbent pad. A pad handles liquid water that has already formed. A packet handles vapour before it forms.
Not an oxygen scavenger. An oxygen absorber removes oxygen. A desiccant removes water vapour. If both matter, you need two components, not a bigger bag of one.
There is also a sensory trap. A product can feel completely dry while the air in the carton is still humid. The failure is driven by humidity at the surface and in the headspace, not by visible wetness.
The Unit System, And Why Grams Fail
Ten grams of clay and ten grams of sieve do very different amounts of work. That is why the trade stopped quoting grams.
The US military spec MIL-D-3464 solves it with a Unit. A Unit is the amount of desiccant that adsorbs 3.0 grams of moisture from air at 20 percent humidity. At 40 percent it adsorbs 6.0 grams, both at 25 °C.
Read it again. The test is a performance test, not a weight. A material that is twice as good needs half the mass for the same Unit count.
Packets are sold in fractions and multiples, from one sixth of a Unit up to 16. A standard one-Unit clay packet holds about 33 grams of clay, which is enough to reach that 6-gram figure.
Which is why an 80-Unit pouch is a red flag rather than a bargain. The spec does not go that high, so the number was written by someone who never read it.
| What the label says | What it should mean | What to check |
|---|---|---|
| 1 Unit | Adsorbs 6.0 g at 40 % RH, 3.0 g at 20 % RH | Which material, and the packet mass |
| 1/6 Unit | A small packet for tight spaces | That the count matches the carton volume |
| 16 Units | The top of the MIL range | Mass per packet, and the test report behind it |
| 80 Units | Not a valid MIL-D-3464 figure | Ask for the calculation, not the claim |
One more trap sits in the same line. A Unit is set at one moisture level. Take that packet into a hot, wet box and its life shortens, because it fills up faster.
The Six Types You Will Be Quoted
Most quotes name one of these, and the differences are large enough to change the packing plan. A supplier reference on the types gives the same six, with the temperature notes below.
Clay is the workhorse, usually a natural mineral called montmorillonite. It is the cheapest per pound, it adsorbs well in normal conditions, and it works below about 50 °C. Above that it can start giving water back.
Silica gel is a porous mineral with pores around 24 angstroms. It keeps working up to about 105 °C and does best in warm room air. It will pull a box down to roughly 40 percent humidity.
Indicating silica gel is silica gel washed with cobalt chloride. It is deep blue when dry and turns pink as it loads, with the change normally showing past about 8 percent moisture by weight.
Molecular sieve is a made zeolite with one pore size, sold as 3A, 4A, 5A or 13X. It is the strongest of the group, holds water far above boiling point, and can pull humidity down to about 1 percent.
Calcium oxide, or quicklime, holds not less than 28.5 percent of its own weight in water. It works at very low humidity, but slowly, often over days, and it swells as it loads.
Calcium sulfate takes only about 10 percent of its weight. It is stable and clean, and it belongs in a lab rather than a carton.
| Type | How much it holds | Temperature | Where it fits |
|---|---|---|---|
| Clay | About 6 g per Unit at 40 % RH | Below about 50 °C | Cartons, crates, container bags |
| Silica gel | Same Unit basis, cleaner handling | Up to about 105 °C | General goods, food and pharma contact |
| Indicating gel | Shows load past about 8 % | Same as silica gel | Kit boxes that get inspected |
| Molecular sieve | Highest, down to about 1 % RH | Holds water past 225 °C | Electronics, low-humidity specs |
| Calcium oxide | At least 28.5 % of its weight | Works at low RH, slowly | Dehydrated food |
| Calcium sulfate | About 10 % of its weight | Stable when warm | Laboratory use |
Two rules come out of that table. Do not pay for sieve where clay would do, and do not put clay on a hot lane that calls for silica gel.
Matching The Type To The Cargo
The goods decide the type before the price does.
Steel parts, tools and machines. Clay or silica gel in carton bags, plus a barrier liner if the voyage is long. Rust needs moisture, so the aim is low RH in the air gap, not a dry-looking part.
Electronics and fine assemblies. Molecular sieve, in a barrier pouch, with the seal as the real spec. A perfect sieve behind a leaky seal is a wasted sieve.
Food and pharmaceuticals. Silica gel is the type cleared for direct contact in the United States, which is why it dominates those lines. Keep the indicating version away from anything edible.
Dehydrated food. Calcium oxide, for the very low humidity it can reach. Plan for the swelling and for the days it needs to work.
Full containers. Container bags of clay, hung or laid along the walls, sized to the volume and the voyage. They are there to slow water film, not to dry the cargo itself.
One line is worth memorising. The desiccant protects the air; the barrier protects the desiccant.
Temperature Is The Trap
A sealed carton is not a stable place. Day and night move the steel, the air and the cargo at unlike rates.
Warm air holds more water vapour than cold air. When a container cools at night, the air inside can no longer hold what it carried at noon. The surplus condenses on the coldest surface, usually the roof or the walls.
That is how container rain happens: water drips onto cartons that were dry when loaded.
Type choice changes the outcome here. Clay works below about 50 °C and can give moisture back as it warms, which is the wrong behaviour in a hot lane.
Silica gel keeps working to about 105 °C, and sieve well past that. If the cargo crosses the equator in a steel box, the heat window matters more than the price per kilo.
The cold end matters too. A desiccant does not stop water film; it lowers the humidity so less water is available to condense. That is a real difference, and it is why sizing has to allow for the cycles, not just for the average.
Sizing Without Guessing
There is no universal formula, and any supplier who offers one is guessing on your behalf. A packaging supplier’s guide puts the inputs in the same order.
What exists is a set of inputs. The inputs are the target moisture inside the pack, the time in transit and storage, and the internal volume. Add the barrier film or liner, the moisture already in the product, and the water held in the packaging.
Two of them are usually ignored: the product’s own moisture, and the water held in the carton board and the pallet. Both are inside your control.
Then the arithmetic is simple. Suppose a carton has to absorb about 30 grams of water over the voyage. That is five Units at 40 percent humidity, because a Unit is defined as 6 grams at that level.
Five Units is roughly 165 grams of clay, since a one-Unit clay packet holds about 33 grams. The mass follows the Unit count; it does not replace it.
Where the method earns its keep is in the comparison. If the same carton is lined with a good barrier, the water that can enter drops, and the Unit count drops with it. Barrier and desiccant are one budget, not two.
When the value of the cargo is high, or the spec is audited, test instead of estimating. A trial carton with a humidity indicator card and a known desiccant load will teach you more than a year of rules of thumb. Two weeks is usually enough.
What The Label Has To Say
A desiccant packet is a small object with a large warning on it, and the words are there for a reason.
The first line is the material. “Desiccant” alone tells a warehouse worker nothing, and it tells a customs officer less. Clay, silica gel and molecular sieve behave differently and are handled differently.
The second is the count. A Unit figure, or a mass per packet, gives the packer something to check against the work instruction.
The third is the warning. Silica gel packets carry a do-not-eat line because the contents are a choking risk and the dust is an irritant. On a consumer product that warning belongs on the packet, not only on the carton.
The fourth is the indicator legend. If the gel is blue when dry and pink when loaded, say so, and say at roughly what load it turns. A pink bead is useful evidence; an unexplained colour is not.
The fifth is the food-contact statement. Silica gel is the type cleared for direct contact in the United States, and the indicating version is not, because it carries cobalt chloride.
The sixth is the lot. In a regulated line, a lot number and a certificate of analysis are what turn “we used desiccant” into a record.
Storage And Line Discipline
A desiccant starts working the moment the bag is opened, and it does not stop.
So the rule for the packing line is simple. Keep the supply in its sealed container, decant only what the shift will use, and reseal the rest.
A part-used bag left on a bench overnight has already spent room to hold. Nobody sees it happen, which is why the failure shows up as a mystery rather than a mistake.
Placement matters as much as quantity. A pouch taped to the lid of a carton works on the headspace. The same pouch buried under the cargo works much more slowly.
Count control is the last habit. One carton, one pouch, one tick on the sheet. The commonest error in a busy packing hall is a mix-up between a 1/6 Unit packet and a 2 Unit packet. They look identical in a photograph.
Six Lines For The Order Sheet
These six lines fit on one page. They move the conversation from a price per bag to a spec.
One, the material and the count. Clay, silica gel, molecular sieve or calcium oxide, with the Unit count and the mass per packet.
Two, the target and the clock. The humidity you want inside the package, and how long it must hold.
Three, the temperature window. The hottest and coldest the cargo will see, because that decides whether clay is allowed.
Four, the format and the coverstock. Pillow packet, canister, strip or container bag, plus the dust requirement if the cargo is sensitive.
Five, the food-contact status. Whether the pack touches food or pharma, and confirmation that no cobalt indicator is used in that position.
Six, the label and the lot. Material, count, warning, indicator legend, lot number and a certificate of analysis per batch.
All six belong in the short spec page the plant works to, next to the packing method. Dry cargo also needs dry documents: the code that clears customs and the packing list should describe the same carton.
When the goods are packed, a goods check before the seal goes on should open one carton. Confirm the packet type, the position and the label. Then the container seal goes on.
In a container, the bags are part of the barrier plan rather than a separate buy. They sit alongside the liner and the material choices for the packaging itself.
Send the cargo, the route and the time in transit. I will check which desiccant type suits the temperature, and what the Unit count should be for that trip. Then I will read the packet label against what your market expects.
Ask For A Packing CheckIs silica gel the same as a desiccant?
No. Silica gel is one type of desiccant. Clay, molecular sieve, calcium oxide and calcium sulfate are others, and they hold different amounts of water at different temperatures.
What does one Unit of desiccant mean?
Under MIL-D-3464 it means the amount that adsorbs 3.0 grams of water at 20 % humidity, or 6.0 grams at 40 %, at 25 °C. It is a performance figure, not a weight.
Can I use clay for a hot lane?
Carefully. Clay works below about 50 °C, and above that it can give moisture back rather than take it in. A hot route is usually a reason to move to silica gel.
Does a desiccant remove oxygen?
No. It removes water vapour. If oxygen is the problem, you need an oxygen scavenger, and the two components are often used together in one pack.
Why did my desiccant turn pink before shipping?
It was exposed to air. Indicating gel starts loading the moment the bag is opened, so a part-used supply left unsealed can be half spent before it reaches a carton.
Can I reuse the packets?
Some types can be dried and reused, but in a production line the room to hold is unknown after the first use. For audited packaging, one-time use with a lot number is the safer rule.
Questions & Comments
We read every one and reply within 24 hoursIf a desiccant quote lands on your desk, send it over. I will read the type, the Unit count and the label against the cargo and the lane.