Corrugated Cardboard: Flutes, ECT, And The Real Cost
Home
Yiwu, Zhejiang, China
Mon – Fri 9:00 AM – 6:00 PM · Sat 9:00 AM – 4:00 PM
[email protected]

What Is Corrugated Cardboard: Flutes, ECT And The Real Cost

Alan Xiao, Founder of Sourcing Pioneer
Alan Xiao Founder of Sourcing Pioneer
· Updated November 11, 2026 · 12 min read

Corrugated cardboard is paper folded into a wave, glued flat.

A wavy sheet, called the medium, is glued between one or two flat sheets called liners. The air gaps in the wave give the board its cushion and its stiffness.

The material is cheap by weight and expensive by volume. Almost every argument about a corrugated box is really an argument about how much air you are willing to ship.

This article gives the flute table, the two strength tests that buyers mix up, and the four levers that move the price.

Studio still life on a beige surface of stacked kraft corrugated boxes, one cut open to show the fluted layer between two liners
Board is mostly air, held in shape by paper.

The Short Answer

Corrugated board is a fluted paper sheet with one or two flat linerboards glued to it. One liner makes single-face board, which is used as a wrap. Two liners make the board that becomes a box.

The medium is thin paper, about 130 grams per square metre in the United States and commonly 90 in the United Kingdom.

The liners are heavier. They are made from recycled fibre, sold as test liner, or from virgin kraft, and they may be bleached, mottled, coloured or preprinted.

Everything is made on a corrugator, a line that softens paper with steam, forms the wave on geared wheels and glues the layers. A modern line runs at about 500 feet a minute, or 150 metres.

The spare capacity of that line is why corrugated is cheap. The weight of paper in the sheet is why it is not free.

How A Sheet Is Built

The medium is heated, moistened and pulled through a pair of fluted rolls. That sets the wave.

At the single-facer, one liner is glued to the wave with a starch adhesive. The result is single-face board, a flexible sheet used to wrap furniture and glass.

At the double-backer, a second liner is glued to the open side of the wave. Now the board is a sandwich, and it can carry load on its edge.

Then it dries over hot plates, is cut to sheet, and is scored and slotted into a box blank. Heating the outside of the stack and cooling the inside is what makes the board flat rather than warped.

That last point matters at goods-in. Warp is not a paper fault in most cases. It is a sign that one side of the sheet took more heat or more moisture than the other.

Flute Letters Are Not Sizes

Five flute letters cover almost everything a buyer will meet. The letters record the order in which the flutes were invented, not their size.

So B is not larger than A, and C is not a later version of B. Each letter is a fixed wave, and each wave has a count of flutes per foot.

That count is the reliable identifier. Board thickness varies with the corrugator and the paper. Two B flutes from two plants can measure differently and still carry the same number of waves.

FluteFlutes per footThicknessWhat it is used for
A334.8 mmCushioning for fragile goods
C394.0 mmThe common shipping box
B473.2 mmCans, small boxes, better print
E901.6 mmRetail mailers, graphics
F1250.8 mmFolding-carton replacement
Cross-sections of A, C, B, E and F flute corrugated board drawn to the same scale across 90 millimetres, showing wave count rising as thickness falls
Same width of board, five waves. Thin flutes are not weak flutes.

Two warnings about that table. First, supplier charts online do not agree on the millimetres, and B is often printed as 2.4 rather than 3.2. The counts above come from a reference table built on the inch figures.

Second, C flute is the default because it balances the two jobs. It is thick enough to cushion and stiff enough to stack, and it still folds on a standard machine.

Finer flutes exist for a different reason. An E or F flute gives a smooth face, so a printed panel comes out sharp. A C flute face is a series of hills, and print has to be coarse to survive them.

ECT And Burst Are Two Promises

Two tests appear on every board grade in the trade, and buyers treat them as two spellings of one number. They are not.

Edge crush presses a small strip of board on its edge until the flutes collapse. The result is a force per unit of width, in kilonewtons per metre or pounds per inch.

That figure predicts stacking. It is the one to use when the question is how high a pallet can go before the bottom box gives way.

Burst pushes a rubber diaphragm against the flat face until the paper ruptures. The result is a pressure, in kilopascals or pounds per square inch.

That figure describes handling damage: a corner strike, a forklift nudge, a strap pulled tight. It says nothing about a stack.

TestUnitPredictsMethod
Edge crush, ECTkN/m or lb/inStacking strengthISO 3037, TAPPI T 811
Burst, MullenkPa or lb/in²Puncture and rough handlingISO 2759, TAPPI T 810
Flat crushkPaWhether the flutes stay standingTAPPI T 825

The consequence is practical. A grade such as 32 ECT fixes an edge crush figure and says nothing about which flute carries it.

So the same 32 ECT can arrive as a C flute board or a B flute board. One is thicker, one prints better, and both meet the number on the order.

Panel comparing edge crush test and burst test: a strip crushed on its edge against a face ruptured by pressure, with the figure each one reports
One test stands a strip on edge. The other pushes on the face.

The test methods are published. Edge crush runs to ISO 3037 and TAPPI T 811, and burst to ISO 2759 and TAPPI T 810. Flat crush runs to TAPPI T 825. The reference entry on the material gives the flute figures used above.

If the carton has to survive a parcel network, burst and drop matter more than the stack. If it has to survive a month in a warehouse, edge crush is the number to argue about.

Moisture, And The Strength It Takes

Paper is a sponge with a specification. Board is expected to sit between 6.5 and 9.5 percent moisture by weight.

Below that band the sheet cracks when it is scored. Above it, the compression strength falls, because water softens the fibre and the flutes stop standing up.

That is the number almost nobody puts on an order. It explains a shipment that passed at the factory and failed at the destination.

A container loaded in a dry month, moved through a humid port and opened in a cold warehouse crosses that band twice. The box does not change its grade. It changes its behaviour.

Board is also directional. Edge crush, bending stiffness and even the surface behave differently along the flutes than across them. A box that is strong on one axis can be weak on the other.

Practical answer for a humid route: state the moisture band, and buy one grade higher than the dry-route calculation, or add a moisture barrier. Either costs less than a claim.

Board Strength Is Not Box Strength

Edge crush is measured on a small strip of board in a laboratory. A box is a structure, and a structure has more ways to fail.

Panel size, box height, the score lines and the way the flaps meet all move the final figure. Two boxes from the same board can carry different loads.

Time moves it as well. Corrugated creeps under a steady load, so a pallet that is fine on day one is not the same pallet on day thirty.

Stacking pattern decides which panels take the load. A column stack puts the weight on the vertical walls; an interlocked stack puts it on the product inside.

The most common box style is the regular slotted container, with all flaps the same length from the score. It is cheap to make and it is what most buyers mean by a box.

Order it by internal dimensions, because that is the space the product has to fit. The outside grows by the board thickness. That is why a C flute box takes more pallet height than a B flute box of the same internal size.

Where the load is the argument, a drop test against a published sequence tells you more about a parcel route than any board grade.

Printing On A Spongy Surface

A corrugated face is not flat. Under the liner there are hills, and a print plate pressed onto them prints the tops harder than the valleys.

That is why most corrugated print is flexography: a soft plate, a water-based ink and a coarse design. Fine type and tight registration fight the surface.

There are three ways around it, and each has a price.

Print the liner first. A preprinted liner goes onto the corrugator already carrying the design, so the graphics are as sharp as the paper. It is a long-run option.

Use a fine flute. An E or F flute gives a flatter face and a better plate contact, at less cushioning.

Laminate a printed sheet. Single-face laminate glues a litho-printed paperboard to the board, which is how retail packaging gets photographic quality on a structural box.

For most export cartons, one or two colours and a large mark is the right answer. The box has to survive a port, not a shelf.

What Recycling Cannot Take

Old corrugated containers are one of the strongest fibre sources in the waste stream. They bale well, they pulp easily, and the fibre can go round several times.

Two things break that loop. Wax coatings are hard to separate from the fibre, and pressure-sensitive tape and labels leave sticky particles that contaminate the pulp.

A laminated or heavily coated box is not automatically unrecyclable, but it is a question for the mill rather than an assumption for the listing.

If a buyer needs a recycled claim, the useful figure is the share of post-consumer fibre, not the word recycled on its own. The same discipline applies to recycled plastic, where the percentage is the only part of the claim with a number in it.

The fibre story also explains a price move. When old corrugated gets expensive, board gets expensive, and the quotation moves with a market the buyer never sees.

Four Levers On The Price

Board is sold by area and by weight, so the price follows the paper in it. Four decisions move that figure.

The flute. The same edge crush on a thinner flute uses less paper and less pallet height. Moving a shipping box from C to B is the classic saving, and it costs cushioning.

The liner. Kraft on the outside, test liner inside, or recycled on both faces. Each swap changes the look, the print result and the price.

The print. One colour on a flexo machine is a pass. Two colours with tight registration is a second pass and a slower line.

The cube. Thinner board means more boxes per pallet and more pallets per container. On a long ocean route, that saving can be larger than the paper saving itself.

Then there is the quiet lever: specification. A box one grade stronger than it needs to be is a permanent cost. It is also the easiest thing to leave in place for years.

Six Lines For The Order Sheet

Each line closes a gap that a sample box leaves open. None of them needs a test house on the first order.

One. The construction: single wall or double wall, and the flute letter with its flutes per foot.

Two. The grade, named as edge crush or burst, with the unit. Writing 32 without saying ECT or pound test is half a grade.

Three. The liner: kraft or test, the grammage of each face, and whether one face is white.

Four. The box style and the internal dimensions, with a tolerance. External size follows the board.

Five. The print: colours, ink type, position and a colour reference rather than a name.

Six. The pallet pattern, the bundle count and the moisture band for the route.

Line two is the one that causes most disputes, because a grade written without its test can be met by two different boards.

Where the carton has to be marked for a customer’s own warehouse, the shipping marks belong on the same drawing as the size.

All six fit on one page. The sheet a factory builds against is what keeps them attached to the order.

Then check the run, not just the sample. An inspection that measures the board catches a cheaper board that a photograph cannot.

ECT OR BURST

Send me a carton quotation, a board grade or a box drawing. I will check the construction and flute count, whether the grade says ECT or burst, the liner weights, the internal size and tolerance, and the pallet pattern. No cost, no obligation.

Check My Spec

Questions Buyers Ask

Is corrugated cardboard the same as a cardboard box?

A box is the product; corrugated board is the material it is made from. A fluted sheet is glued between one or two liners, and that sandwich is what gives a box its stiffness.

Which flute is the strongest?

A flute is the thickest and cushions most. C flute is the usual shipping box because it balances cushioning and stiffness. The strongest board is a double wall, not a single large flute.

What does 32 ECT mean?

It is an edge crush result: the board carries 32 pounds per inch of width before the flutes collapse. It fixes a strength figure, not a flute, so 32 ECT can be made on B or on C flute.

What is the difference between ECT and Mullen?

ECT presses a strip on its edge and predicts stacking. Mullen, the burst test, pushes on the face until the paper ruptures and describes handling damage. One is compression, the other is pressure.

Is corrugated cardboard recyclable?

Yes, and old boxes are one of the strongest fibre sources available. Wax coatings, heavy lamination and adhesive residue are the parts that spoil the loop, so ask the mill about the specific construction.

How thick should corrugated be for shipping?

Most shipping boxes are 3 to 4 mm, which is B or C flute in single wall. The grade matters more than the thickness, because a thin high-grade board can out-carry a thick weak one.

Questions & Comments

We read every one and reply within 24 hours

If a carton quotation or a board grade crosses your desk, send it over. I will check the flute count, whether the grade is ECT or burst, and the liner weights.

Subscribe
Notify of
guest
0 Comments
Most Voted
Newest Oldest
0
Would love your thoughts, please comment.x
()
x