What Is rPET: Bottles, Pellets, And The Claim
rPET is recycled polyethylene terephthalate. That is PET plastic collected, cleaned and melted back into pellets or flakes a factory can use again.
The letters stand for recycled polyethylene terephthalate. The base polymer is the one used to make clear water bottles. It is also the polymer sold as polyester fibre.
That single fact explains most of the confusion in this market. A bottle, a yarn and a food tray can all be called rPET. They are not the same buy.
This article covers where the material comes from and what the grades mean. It also covers which law sets a recycled-content floor. And it covers what a certificate does not prove. Then it turns all of that into six lines for an order sheet.
One Polymer, Three Markets
PET is a polyester. The name describes the link that repeats along the chain. It says nothing about the shape of the product.
The recycling code on a bottle is 1. That number is how a sorting line knows which bales to pull. It is also why bottle collection works at all.
Once the waste is melted and re-formed, three markets fight over it.
The first is bottles. A clear pellet with the right chain length can be blown into a new bottle. This is the highest-value use.
The second is fibre. Polyester yarn for clothing, bags and filling takes a lower grade. It also takes most of the volume.
The third is sheet and strapping. Trays, cups and bands need a grade in between. They often accept a duller colour.
So the first question about any rPET offer is not “how much recycled content”. It is “which of the three is this”. A fibre quote cannot be used to judge a bottle price. The reverse is true too.
The material also carries a second name that trips up buyers. In textile supply chains the same recycled polymer is sold as recycled polyester. The two words describe one polymer and two industries.
From Bale To Pellet
Mechanical recycling is the route behind almost all rPET sold today. It runs in five steps.
First the bottles are collected and baled. Then a sorting line removes caps, labels, clear PVC and coloured bottles.
Next the bales are ground into flake. The flake is then washed, rinsed and dried. Glue and dirt would leave colour and odour in the pellet.
Last, the flake is melted and cut into pellets. Some lines add a vacuum step here to pull out volatile residues. That step decides whether the pellet can touch food.
Chemical recycling is the other route, and the trade calls it tertiary. It does not melt the chain. It breaks the chain back to its building blocks and builds PET again.
The EU rule on recycled plastic for food contact names both routes. It treats mechanical PET recycling and closed loops as fit methods. New technologies face a sign-off route of their own.
What matters on a quotation is simpler. Mechanical rPET carries the history of what was in the bale. Chemical rPET carries a process cost. Neither is better in every case, and the price gap between them is real.
The feed source is the next thing to pin down. Three very different streams get sold under one word.
| Feed source | What it is | What the buyer should ask |
|---|---|---|
| Post-consumer (PCR) | Bottles and trays collected from households and businesses | Which country collected it, and is there a collection record per lot? |
| Post-industrial (PIR) | Factory scrap: edge trim, rejects, off-grade fibre that never reached a user | Is it the factory’s own scrap, and how is it kept apart from process waste? |
| Closed loop | Containers returned to the filler and refilled, never entering general waste | Who owns the loop, and what stops a non-approved bottle joining it? |
Only the first stream earns the claim most retail buyers are trying to buy. A PIR stream is genuinely recycled. It is also much easier to source, so a vague “recycled” line often hides it.
If the product is a bag, a mat or a garment, the fibre route starts here. A factory set up for lower-impact textile work can usually say which stream its yarn came from. That answer is the first real test of the offer.
Three Grades, And The Number That Sorts Them
The number that sorts rPET into grades is intrinsic viscosity, usually written IV. It measures how long the polymer chains are.
Long chains make a strong wall, so a bottle needs a high IV. Short chains flow more easily, so fibre spinning prefers a lower one. Sheet sits between the two.
Recycling shortens the chain a little each time. Heat, moisture and shear all cut it. That is why a pellet rarely matches the IV of the bottle it came from.
That single effect explains the discount on recycled material. It is not a purity problem. It is a chain-length problem. A buyer who ignores it will see thin walls or broken yarn.
One US trader publishes the working range on its own product page. The figures run from 0.55 to 0.82 IV across its grades. PVC sits at 0 to 30 ppm, and label content at 0 to 2 percent. Those are that seller’s numbers, not an industry standard. They are still useful, because they name the three things a spec sheet should state.
PVC is the one to watch. A few parts per million of PVC break down in the melt and leave black specks. A speck in a clear bottle is a reject.
| Grade | What it is bought for | What the sheet must state |
|---|---|---|
| Bottle to bottle | Clear drinks bottles, including food contact | IV, PVC ppm, food-contact route, and the decontamination step used |
| Fibre extrusion | Polyester yarn for apparel, bags, filling and upholstery | IV, colour, spin finish, and which waste stream the flake came from |
| Sheet and strapping | Trays, cups, boxes and PET band | IV, colour, and whether the sheet is mono-layer or capped with virgin resin |
The last row hides a claim that buyers miss. A tray with a thin virgin skin over a recycled core still counts as recycled content. The percentage is not 100.
Ask for the layer structure, not the headline number. The same rule applies to a food-grade part. There, the surface is the only layer a fork touches. The test a food grade material must pass looks at what leaves the surface, and a recycled core does not change that test.
Food Contact: Two Regulators, Two Answers
Food contact is where most rPET claims quietly break. The United States and the European Union ask different questions.
In the United States, the FDA looks at each proposed use case by case. It wants the process described, the source controlled, and evidence that incidental contaminants are removed.
Where a migration estimate is needed, the agency works to 0.5 parts per billion in the diet. It treats that level as too small to matter.
Then comes the fact that changes the whole conversation. The FDA now states that surrogate contaminant testing is no longer needed. It has accepted that recycled PET or PEN from a tertiary process is fit for food.
It goes further. It has decided that such processes produce plastic of fit purity. So it no longer reviews them or writes individual opinion letters.
So “FDA approved recycled PET” describes a letter. For tertiary PET, the agency has stopped writing it. What exists is a database of past submissions. The older letters sit in it.
The European Union takes the other route. Recycled plastic for food contact must be decontaminated by a suitable recycling technology, under Regulation (EU) 2022/1616.
That rule names mechanical PET recycling and closed product loops as suitable methods. A new technology must be approved before its output can be sold for food contact.
Two consequences follow, and both cost money if they are found late.
A US letter does not clear an EU shipment. The EU test is about the decontamination step that made the pellet. A paper from another agency does not answer it.
An EU approval does not clear a US shipment either. Each market has its own file, and a buyer shipping to both needs both.
This is the point where a cheap offer usually stops being cheap. A pellet with no food-contact route is fine for a strapping band. It is wrong for a tray. The price difference reflects that.
The Floor In Law
For packaging in Europe, recycled content is no longer a marketing choice. Two instruments set a floor.
The first covers drinks bottles. The single-use plastics directive sets the floor for PET drinks bottles. It asks for at least 25 percent recycled plastic from 2025, and 30 percent from 2030.
Both figures are averages across all such bottles sold in a Member State. They are not a rule for each bottle.
The second instrument is wider. Regulation (EU) 2025/40 sets a minimum recycled content for the plastic part of packaging, by packaging type, averaged per plant and year.
| Packaging type | From 1 January 2030 | From 1 January 2040 |
|---|---|---|
| PET contact-sensitive packaging, excluding single-use drinks bottles | 30 % | 50 % |
| Other plastic contact-sensitive packaging, excluding single-use drinks bottles | 10 % | 25 % |
| Single-use plastic drinks bottles | 30 % | 65 % |
| All other plastic packaging | 35 % | 65 % |
Read the table with one more sentence from the same article. The recycled content must come from post-consumer waste. The figure is a plant average over a year.
That averaging rule is where a buying decision lives. A converter can blend a high-content line with a low one. The plant average still passes. The number on one carton is not the number in the rule.
Nothing in either instrument sets a floor for a T-shirt, a tote bag or a bath mat. For textiles, recycled content is a selling point chosen by the brand, and that is exactly why the claim needs a certificate behind it.
What The Label Certifies
For textile goods there is no legal floor, so the claim rests on a private standard. The one most factories quote is the Global Recycled Standard.
It is owned by Textile Exchange, and the current edition is GRS 5.0, effective 1 July 2026.
Four clauses decide whether a seller’s claim survives a check. Each one is easy to state.
Scope. The standard applies to products that contain 20 percent or more recycled content. Below that line, the product cannot be certified at all.
Definition. Recycled content is the proportion, by mass, of recycled material in a product. Only pre-consumer and post-consumer material count.
Labelling. Only products with at least 50 percent recycled content qualify for product-specific GRS labelling. A 30 percent product can be certified without carrying the logo.
Documents. Every batch needs a transaction certificate, issued by an approved certification body. Pre-consumer and post-consumer percentages are recorded separately on it, batch by batch.
That last clause is the most useful tool a buyer has. A supplier may claim post-consumer bottles. If the certificate shows a post-industrial figure, the paperwork has caught the story.
One more clause matters for the wrong reason. The standard sets a mass balance formula for each material. That formula accounts for losses between recycled and virgin inputs.
Read plainly, the chain is tracked by volume and calculation. It does not follow one bag of pellets to one carton. A buyer who needs the physical lot kept apart has to write that into the order.
It runs from the collector to the recycler, then to the spinner. From there it reaches the trader who ships. Every one of those stages must hold a certificate for the claim to travel.
So the documents to ask for are three, and they are not the same paper. A scope certificate covers the site. A transaction certificate covers one shipment. A test report covers one property of one sample.
A factory that can only produce the first one has a certified site and an unproven order. The finished bag or garment carries the same risk as the trader in front of you.
The Numbers A Quote Leaves Out
Five things change between a fibre-grade offer and a bottle-grade offer. A quote usually shows none of them.
The first is chain length. Each pass through heat shortens the polymer. A pellet made from bottles will draw into a weaker yarn than virgin resin does.
The second is colour. Recycled clear is not optically clear. A buyer who needs a bright white print has to add a cap layer or accept a duller base.
The third is the contaminant count. PVC, glue and label residue all show up as specks or weak spots. That is why a published figure for PVC and label content belongs in the spec.
The fourth is the food-contact route. A pellet with no approved decontamination step costs less, and it cannot legally become a tray.
The fifth is the certificate itself. A batch with a transaction certificate costs more to run. The volume has to be booked and audited at every stage.
What is missing from every quote this author has seen is a price index. No first-party series for rPET flake or pellet was used here. So no price figure is offered.
The same caution applies to the energy claims that fill the marketing pages. Savings of 33 to 85 percent appear in supplier blogs with no stated method. One page credits a reseller for the figures.
Treat any single number as that seller’s own estimate. Ask for the method, the system boundary and the date. A buyer who repeats it on a listing takes on the risk of it.
Wording That Gets A Listing Pulled
The claim layer moved in Europe in 2026. It now covers the words on a listing as closely as the words on a carton.
Directive (EU) 2024/825 adds generic environmental claims to the list of practices banned in all circumstances.
The examples the text names include environmentally friendly, eco-friendly, green, nature’s friend, ecological and climate friendly. A page built on those words has no defence.
The same directive bans a claim about the whole product when only one part or one activity qualifies. A recycled body with a virgin zip is the classic case.
Member States had to publish their measures by 27 March 2026. They apply them from 27 September 2026. The rule is live for this buying season, not for some later one.
Three habits keep a listing clear of it.
Name the part. Write recycled polyester shell, and say what the lining, zip and trim are.
Name the content. Write 52 percent post-consumer recycled polyester, by mass, rather than 100 percent recycled.
Name the proof. Write certified under GRS, with the certificate number, rather than an adjective.
The carton is covered by the same rule. A mailer printed with a leaf and the word green is a claim about the pack. It needs the same evidence as the product inside it.
That is where a soft claim travels furthest. A supplier sees a box as decoration, and the regulator sees a label. What a parcel is allowed to say on its print is decided by the same wording test. It is worth settling before the artwork is signed off.
Six Lines For The Order Sheet
Each line closes a gap that the word rPET leaves open. All six fit on one page.
One. The grade: bottle to bottle, fibre, or sheet, with the IV band wanted for that use.
Two. The feed source: post-consumer, post-industrial, or closed loop, stated separately by percentage.
Three. The chain length: IV of the delivered lot, and the test method used to measure it.
Four. The contaminant limits: PVC in ppm, label and glue content, and the moisture limit at packing.
Five. The papers: scope certificate for the site, transaction certificate per shipment. Add the food-contact file if the part will touch food.
Six. The wording rule: the exact recycled-content sentence allowed on the product, the carton and the listing. Approve it in writing before print.
Line five is the one to push hardest. It is the cheapest to promise and the slowest to produce. A supplier who already issues one per shipment can meet it in a day.
A buyer who needs a hard number on a bottle wall should read how a clear plastic grade is specified. The same three figures decide it: chain, clarity and food contact.
Send me an rPET offer, a scope certificate or a transaction certificate you have been handed. I will check which grade the price is built on, whether the batch separates post-consumer from post-industrial, and where the claim would fail a European listing rule. No cost, no obligation.
Check My CertificateQuestions Buyers Ask
Is rPET the same as recycled polyester?
It is the same polymer under two names. The plastics trade says rPET. The textile trade says recycled polyester. Both describe PET that has been melted and re-formed.
Is recycled PET weaker than virgin PET?
Usually a little, because each melt shortens the chain. A bottle grade keeps enough length for a new bottle. A fibre grade is chosen for spinning, not for strength.
Does a GRS certificate mean the product is 50 percent recycled?
Not on its own. The standard covers products from 20 percent, and only the 50 percent level earns product-specific labelling. The transaction certificate for that batch carries the real figure.
Can I say food grade on a recycled tray?
Only with a route to food contact in the market you sell into. In Europe that means an approved decontamination step. In the United States it means the FDA has no objection to the process.
Why is rPET sometimes more expensive than virgin resin?
Collection, sorting and the audit trail all add cost. Food-grade plastic also competes with bottle makers for the same clear bale. Price also moves with the bale market, so a quote has a short life.
What happens if the certificate arrives after the shipment?
The claim is unsupported until it arrives, so the stock cannot be sold as recycled. Make the certificate a shipping document, listed with the packing list and the invoice.
Questions & Comments
We read every one and reply within 24 hoursIf a recycled-content offer reaches you, send it over. I will look at the grade behind the price, at whether the batch keeps post-consumer and post-industrial apart, and at the sentence you plan to print.