Jacquard Weave: How The Loom Builds The Pattern
Home
Yiwu, Zhejiang, China
Mon – Fri 9:00 AM – 6:00 PM · Sat 9:00 AM – 4:00 PM
[email protected]

What Is Jacquard Weave: Pattern Built Into The Cloth

Alan Xiao, Founder of Sourcing Pioneer
Alan Xiao Founder of Sourcing Pioneer
· Updated November 11, 2026 · 11 min read

Jacquard weave is a cloth whose pattern is built by the loom, one warp thread at a time, instead of printed on the surface.

The name comes from Joseph Marie Jacquard, who patented the control mechanism in 1804. Some pages still print 1801; the patent record says 1804.

That mechanism is the whole point. It lets a loom lift any single thread on any pick, so a pattern can have curves, letters and small figures.

This article covers how the mechanism works and how big a pattern can be. It then follows the cost into the six lines a cushion or bedding order needs.

Folded beige jacquard cushion cover with a raised woven pattern on a neutral studio surface
The pattern is cloth, not ink: fold it and the figure follows the fold.

The One-Sentence Answer

A plain loom lifts whole groups of threads at once. A jacquard lifts them one by one.

That single change is what separates a striped shirt from a figured damask. Groups make straight lines and simple blocks, and single threads make shapes.

Nothing is printed. The figure is part of the weave, so it cannot fade like a print and it shows on the back in reverse.

It also cannot be added later. The pattern has to be planned before the warp goes on the beam, because every thread is threaded to its own control.

That is why a jacquard cushion costs more than a printed one at the same weight. The extra money is in the setup, not in the ink.

One Hook For Every Thread

A loom makes cloth by lifting some warp threads to open a gap, called a shed, then passing a weft thread through it.

On a simple loom, threads are tied to a small number of frames. Every thread on one frame moves together, so the pattern repeats over that frame set.

The frame machine is a dobby, and its limit is printed in the catalogue. One builder lists rotary dobbies of 16 to 24 lifting units.

Sixteen to twenty-four frames means sixteen to twenty-four pattern positions. A small geometric block fits. A floral curve does not.

A jacquard replaces the frames with a cord and a hook for each warp thread. Every thread gets its own instruction on every pick.

The machine range is wide. One builder lists formats from 80 hooks up to 25,600 on a single machine, and 51,200 when two are combined.

The small end is real work too. A machine with 80 or 128 hooks weaves name tapes and woven labels, where the pattern is a few characters.

Sharp outlines come from a second effect. On the old draw looms, the figuring shed was drawn once every four picks, and the new machine could draw it on every pick.

That is why a jacquard edge looks cut, not stepped. The weft turns where the design turns, not four picks later.

The pattern itself was stored on cards, one card for each row of the design. A silk portrait woven in 1839 needed 24,000 cards.

Modern machines read a file instead of cards, but the counting has not changed. One row of the design is still one pick.

How Big A Pattern Can Be

Pattern width is a count of threads, and the count has to fit the machine. Width in centimetres means nothing on its own.

Take a furnishing cloth 280 cm wide at 40 ends per cm. That is 11,200 warp threads across the width.

If the figure runs the full width with no repeat, the machine needs 11,200 hooks. A class that tops out at 7,680 cannot weave it, and one at 14,336 can.

Most designs repeat instead. A 70 cm repeat in the same cloth needs 2,800 hooks, which leaves room on a mid-range machine.

Pattern height is counted in picks, and it is not limited the same way. A tall repeat loads a bigger file and runs slower, but the hooks do not change.

The table below lists one builder’s formats. Treat it as a map of what the machines can do, not as a price list.

Machine classHooksWhat it is built for
Dobby (for contrast)16 to 24 lifting unitsStripes, checks, small blocks
Name-selvedge unit80 and 128Woven labels and brand names on the edge
SX classUp to 2,688Flat fabric and terry with a modest repeat
LX class4,608 to 7,680Large-pattern flat fabric at speed
Heavy-fabric class6,720 and 8,448Carpet, velvet and heavy cloth
High-load classUp to 14,336Dense or load-bearing industrial cloth
Large-pattern classUp to 25,600Very wide figures with little repeat
Two machines combinedUp to 51,200The widest repeats in the catalogue

Read the table from the design, not from the price. A 2,800-hook repeat can run on several classes, and the mill will pick the one with spare capacity.

A repeat that does not divide the fabric width wastes cloth at the selvedge. That waste is a real line in the quote, and buyers rarely ask about it.

Weight is a separate question, set by yarn count and density, not by the pattern. The guide to grams per square metre in fabric covers that side.

One practical check sits above all of this. Ask the mill for the repeat in centimetres and in picks, then check both numbers against the machine it names.

Ladder of machine classes from a 16 unit dobby to 51,200 jacquard hooks on a log scale
Hooks are pattern positions. The jump from 16 frames to thousands of hooks is the whole story.

Woven Jacquard And Knit Jacquard

The mechanism is not tied to weaving. Knitting machines also select needles one at a time, so they can build a pattern in the loops.

That product is a jacquard knit, usually a jersey. It stretches, it drapes, and it is made on a circular machine, not a loom.

The two are sold under the same word, and they behave nothing alike. A woven jacquard holds its shape and frays at a raw edge, while a knit jacquard curls and runs.

A cushion cover in woven jacquard keeps a crisp square corner. The same design in knit jacquard needs interfacing or a lining to look firm.

The price differs too, because a circular machine makes a tube at a different rate from a loom making a wide cloth.

So the first line of any enquiry should say which one. “Jacquard” alone leaves the mill free to quote the cheaper of the two.

Damask, Brocade, Matelassé

Four words run through every jacquard conversation, and buyers use them as if they were the same thing. They are not.

Jacquard is the mechanism. The other three are cloths that the mechanism made practical.

ClothHow the figure is madeWhat it looks like
Jacquard (general)Any pattern where each warp end is lifted on its ownRaised figure, visible in reverse on the back
DamaskSatin figure over a sateen ground, warp and weft action reversed at the figureReversible, usually one colour, shine against matte
BrocadeExtra non-structural weft added on top of the ground clothLow relief, richer face, loose or clipped threads at the back
MatelasséTwo layers woven and tied so the surface domesQuilted look with no padding inside

Damask is the one buyers misread most often. It is a reversible cloth, and its beauty comes from light, not from colour. One dyed yarn can carry a full floral figure.

Colour count changes the cloth class. A single damask has one warp set and one weft set, which caps it at two colours. A compound damask adds sets and can carry more.

Brocade is the opposite case. The ornament sits on the ground, not in it, so the back shows floats. A continuous brocade runs those floats from selvedge to selvedge.

Matelassé is a weight decision as much as a look. It reads as a padded quilt and contains no padding, which makes it a common choice for bed covers and shams.

A mill can weave all of these on the same machine. What changes is the file, the yarn plan and the time on the loom. Ask for the cloth by name, not by the loom.

Where It Shows Up In A Home Range

Four parts of a home range use the cloth, and each one asks the mill a different question.

Table linen. Damask is the classic tablecloth, because a single dyed yarn gives a figure that survives hot plates and repeated washing.

Cushions. The repeat has to fit the panel twice, so the figure mirrors across the seam. A 45 cm panel with a 30 cm repeat will not match.

Bedding. Matelassé covers read as quilted without padding inside, which keeps the weight down and the care label simple.

Upholstery and curtains. Brocade still ends up here, because the raised figure and the heavier ground suit a fixed panel, not a washable one.

A jacquard figure also removes two problems a printer has to manage. There is no registration to drift, and no ink to bleed at an edge.

What it adds instead is a seam question. Every panel has to be cut from the same position in the repeat, or the figure jumps at the join.

Where The Money Goes

Jacquard costs more than a print at the same weight, and the difference is set-up, not material. Five lines explain most of the gap.

The warp beam. A warp is wound for a run. Every metre woven shares the same winding and threading work, so a short run carries more of it per metre.

The harness. Each end is threaded to its own cord. A wide cloth with 11,200 ends means 11,200 cords set by hand or by machine, and that is a paid step.

The colours. Every extra weft colour adds picks to a pattern row. More picks per row means the loom turns slower for the same length of cloth.

The dyeing. A two-colour jacquard gets its colour from the yarns, so the yarn is dyed before weaving. You cannot piece-dye a pattern and keep the figure clean.

The width. A repeat that does not divide the fabric width leaves cloth that cannot be used. That waste is priced into the metre, and the mill rarely points it out.

None of that is visible in a swatch. Two samples can look identical and carry very different set-up costs, because one repeat fits the width and the other does not.

This is also why a jacquard design stays in a range for years. Once the warp and harness are set, every extra metre is cheap, so mills prefer long runs of a proven figure.

The site’s notes on woven labels from the same mechanism show the small end of this trade. There, 80 or 128 hooks carry a whole brand name.

What To Test Before Bulk

A jacquard figure has two lives. It has to survive the wash, and it has to stay the same shape while it does.

Colour fastness to washing is the first test, and it has a number. ISO 105-C06 sets the method, and the report gives a grey-scale grade for change and for staining.

Shrinkage is the second. Measure the cloth before and after the named wash cycle, and write the cycle into the order so the lab repeats it.

Squareness is the third, and it is the one that only matters for a figure. Measure a square marked inside the pattern before and after the wash.

A woven figure can pull in one direction more than the other. The cloth still passes a length check while the flower turns into a diamond.

Snagging is the fourth. A raised figure gives a hook something to catch, so a snag test on the face matters more here than on a plain weave.

Seams are the fifth. A cushion is a sewn product, and the weakest point is usually the seam beside the zip, not the cloth.

The inspection step sits after all of that, and it should be written into the order as a stage, not a promise. The guide to textile inspection in China covers the checkpoints and the sampling.

From Artwork To A Cushion

Six steps take a design file to a packed cushion, and each one closes a question the next step would otherwise guess at.

One, the repeat. Give the size in centimetres and in picks, and say whether the figure must mirror at the seam.

Two, the ground. Name the warp and weft counts, the ground weave and the target weight, because all three set the hand of the cloth.

Three, the colours. Count the weft colours, approve one lab dip each, and confirm that the yarn is dyed before weaving.

Four, the sample. Approve the face and the back, since a brocade back carries floats and a buyer who has not seen it will ask about them.

Five, the cut. Mark the cut direction and the pattern match at the seam, then confirm the zip, piping and lining in the same drawing.

Six, the test and the check. Run the wash, shrinkage and squareness tests, then inspect the bulk against the approved sample.

The last step is where most disputes start, because the approved sample and the bulk are compared by eye. A sealed sample with a signed repeat and a weight tolerance removes the argument.

Blanket programmes run the same sequence with a heavier ground, and the notes on which blanket fabrics hold up cover that side of the range.

Six Lines For The Order

“Jacquard cushion cover” is not a specification. It is a name that fits a printed cotton and a heavy matelassé alike.

Line one, the structure. Write woven jacquard, not knit, and name the ground weave beside it.

Line two, the repeat. Give the size in centimetres and in picks, and state whether the figure must match across the seam.

Line three, the yarn. Give warp and weft counts, and say that the colour comes from yarn dyeing, not from a print.

Line four, the weight. Give grams per square metre with a tolerance, measured on the finished and washed cloth.

Line five, the colours. Count the weft colours and hold one approved lab dip for each, because a shade card is not a dip.

Line six, the tests. Name the wash method, the shrinkage limit and the squareness check, then say who pays for the report.

Those six lines fit on one page. They turn a trade word into something a mill can accept or reject before the warp goes on the beam.

Six order clauses for jacquard fabric covering structure, repeat, yarn, weight, colours and tests
Six lines, short enough to sit above the signature on an order form.
REPEAT CHECK

If a jacquard sample is on your desk, send the repeat in centimetres and in picks, plus the width it has to fit. I will check both against the machine class the mill names, and tell you whether the figure divides the width or leaves waste at the selvedge.

Send The Repeat

Questions Buyers Ask

Is jacquard a fabric or a weave?

It is a mechanism, and the cloth takes the name from it. Any woven cloth with a figure built thread by thread is called jacquard.

Is jacquard more expensive than printing?

Yes, at the same weight. The extra cost sits in the warp, the harness and the yarn dyeing, not in the ink.

Can a jacquard pattern be printed instead?

It can, and the look is close at a distance. A print sits on the surface, so it loses the raised hand and shows nothing on the back.

Why does my cushion have loose threads inside?

That is a brocade back. The extra weft floats between figures and is clipped or left loose, which is normal for the cloth.

Does jacquard fabric shrink?

Every woven cloth can, and the amount depends on the yarn and the finish. Ask for the figure after the named wash cycle.

Is jacquard good for bedding?

It is, when the weight suits the use. A matelassé cover reads as quilted without padding, and a lighter jacquard suits shams and curtains.

Questions & Comments

We read every one and reply within 24 hours

Which repeat did the mill quote, in centimetres and in picks? Send both with the panel size, and I will say whether the figure divides the width or doubles back at the seam.

Subscribe
Notify of
guest
0 Comments
Most Voted
Newest Oldest
0
Would love your thoughts, please comment.x
()
x