What Is a Tech Pack? A Costing Document, Not a Drawing
A tech pack is the document a factory prices from. Leave a field empty and the factory fills it with an assumption, then charges you for the assumption.
Most guides on this subject are written for a designer. They explain how to draw the file and which software to keep it in.
This page is written for the buyer who sends the pack out and gets three prices back. It covers the six pages a factory reads, the twelve measurements, the fabric weight line and the grading table.
It ends with what a thin pack costs in sample rounds, weeks and money. That is the part a first-time buyer cannot see.
The Short Answer
A tech pack is a set of drawings, measurements and notes. Together they describe one style well enough for a factory to make it without a question. It covers one style, not a range.
The test is simple. Send it to a factory that has never spoken to you. If the reply comes back with three fabric options and a question about the zip, the pack is thin.
Three things a tech pack is not. It is not a mood board, because a photograph cannot be cut. It is not an order form, because it carries no quantity. And it is not a label file, though the label page lives inside it.
A simple style runs to six pages. A lined jacket runs to twenty. The count matters less than whether every page answers a question the factory will ask.
One habit separates a pack that works from a pack that gets filed. Every page carries a revision letter and a date. A factory that receives two versions builds the one it opened first.
Four People Open It, Not One
Inside a garment factory the pack is opened by four people. Each reads a different page, and each one can stop the order on their own.
The pattern maker opens the drawings and the size table. She drafts the block from the outline and the numbers, so a drawing without a seam line costs her a guess.
The sample room opens the construction notes and the bill of materials. They cut one piece and sew it, and any trim that is not listed is a trim they choose.
The costing clerk opens the bill of materials and the fabric line. His price is built line by line, and a line he cannot find is a line he estimates high.
QC opens the size table and the construction notes last, and measures the bulk against them. A tolerance that was never written cannot be failed.
This is why the order of the pages matters. Drawings first, numbers second, notes third, materials fourth. A pack that mixes them gets a phone call instead of a price.
The Six Pages a Tech Pack Needs
Six pages carry a simple style. Each one answers a question the factory would otherwise ask on a call, and each one is cheap to write once.
| Page | What it holds | What goes wrong without it |
|---|---|---|
| 1. Flats | Front, back and side outline, with every seam drawn | The block is drafted from a photo, and the fit is wrong |
| 2. Size table | Twelve measurements for one size, with a tolerance on each | Each size is made by eye, and the range drifts |
| 3. Construction | Seam type, stitch density, topstitch width, order of sewing | Two factories sew two garments from one drawing |
| 4. Materials | Fabric, trim, thread and interlining, each with a reference | Cheaper trims arrive quietly at the sample |
| 5. Colour | Physical standard per material, and where it sits | A screen image is matched, and the bulk is a shade off |
| 6. Label and pack | Label build, placement, fold, bag and carton | The label is ordered late, and the bulk waits for it |
The flats are the page most packs get right and the one most buyers overwork. A factory needs the seam lines and the proportion, not a rendered illustration.
Three views are enough for a simple style: front, back and one side. Each view should be drawn to scale and labelled with the seam allowance, because a flat without it is a sketch.
The construction page is the one most packs skip, and it is the page that decides whether two quotes are for the same garment. A single-needle seam and a four-thread overlock are two different products at two prices.
Write the order of sewing at the bottom of that page. It takes ten minutes and it settles most arguments about finishing, because the factory cannot claim a step was unclear when the steps are numbered.
The Template: Fourteen Fields in Order
A template is only useful if the fields are filled. These fourteen are the ones a costing clerk needs to price a woven shirt without a call back.
| Field | What a filled entry looks like |
|---|---|
| Style code and revision | AW-114, Rev C, dated 30 October 2026 |
| Garment type and fit | Woven shirt, relaxed, hip length |
| Base size | M, on a European body |
| Fabric and weight | 100 percent cotton poplin, 120 grams per square metre |
| Mill or lot reference | Mill name plus the article number |
| Colour standard | Physical swatch, with a code and a light source |
| Trim list | Buttons, thread, interlining, each with size and finish |
| Seam and stitch | Seam type, stitches per centimetre, topstitch width |
| Measurement table | Twelve points, one size, with a tolerance on each |
| Grading rule | The step between sizes, per point |
| Label build and spot | Woven, inside back neck, 12 mm below the seam |
| Care and fibre lines | The exact wording that will be printed |
| Fold and packing | Fold size, poly bag, carton ratio |
| Sample status | Round, seal number, and who signed it |
Four of these fields go missing in a first pack. The mill reference, the grading rule, the label spot and the packing ratio. Each one is a line the factory will otherwise fill itself.
Keep the template as one file per style, and never as one file per season. A season file cannot be signed, and an unsigned page is not a specification.
The Size Table: Twelve Points of Measure
A size table states one size, point by point, with a tolerance on each. Factories call these points of measure, and the sheet that carries them is the one QC measures against.
Write the point, the way it is measured, the figure and the allowed range. A number without a tolerance cannot be passed or failed, which makes it a wish.
| Point | How it is measured | Starting tolerance |
|---|---|---|
| Chest | Across the front, 2 cm below the armhole | 1 cm |
| Shoulder | Seam to seam across the back | 0.5 cm |
| Across back | Armhole to armhole, 10 cm down | 0.5 cm |
| Sleeve length | Shoulder point to cuff edge | 0.5 cm |
| Bicep | Straight across the sleeve, 2 cm below the armhole | 0.5 cm |
| Cuff opening | Flat across the closed cuff | 0.3 cm |
| Body length | Highest shoulder point to hem | 1 cm |
| Neck opening | Inside the collar, edge to edge | 0.5 cm |
| Armhole | Straight line, pit to shoulder seam | 0.5 cm |
| Waist | Across the front, at the narrowest point | 1 cm |
| Hem width | Flat across the finished hem | 1 cm |
| Label position | From the back neck seam to the label edge | 0.3 cm |
Those tolerances are a starting point, not a standard. A woven poplin holds a tighter range than a rib knit. A knit held to a woven figure passes on the table and fails on the body.
A point is only as good as the way it is taken. How a measurement is taken on a body shows the same points on a person, which is where the reference lines come from.
Two rules make the table usable. Every point is measured flat, with the garment closed and relaxed. And every point names the reference seam, because chest taken 2 cm below the armhole and chest taken at the pit are two different numbers.
A table that states eleven points and leaves the twelfth blank is the most common defect in a first pack. The factory fills the gap with its own block, and the garment arrives close but not the same.
The Weight Line Decides the Price
The fabric row is one line and it carries more money than any other row in the pack. A name alone hands the mill choice to the factory.
Cotton jersey is a name. Cotton jersey at 180 grams per square metre is a product. The two sit at different prices, and the gap grows with the weight.
Write three things on that row. The fibre and its share, the weight in grams per square metre, and a mill or article reference.
The weight is what the mill charges for, so it is what the factory quotes. A pack that names a fibre and skips the weight lets the factory choose the lightest cloth that still passes the name.
The weight figure that changes the quote explains how the number is measured. It also shows why two cloths of the same name can sit a third apart.
The reference is the second half of the row. A mill name plus an article number lets the next factory buy the same cloth. That is the only way a repeat order matches the first.
Add the width and the shrinkage on the same row. A cloth that shrinks four percent in the wash changes every measurement above it. Put the correction in the pack, not in the complaint.
The Grading Table Is a Second Document
Most packs stop at one size. A size table states size M. A grading table states the rule that turns M into S, L and XL, point by point.
These are two documents with two prices. The first is a measuring job. The second is a fitting job. A rule that adds 4 cm to the chest and 1 cm to the waist has to be checked on a body.
Write the step per point, and write the range it applies to. A chest that grows 4 cm per size and a sleeve that grows 0.5 cm is a normal shape. A chest that grows evenly across eight sizes is not.
Skipping this table is cheap on the first order and expensive on the second. The factory scales the block its own way. The fit changes at the ends of the range, and the returns arrive in the largest size first.
The ends of a range are where the rule breaks. The size conversion at the ends of the range explains why a graded label and a graded body can disagree.
What a Thin Pack Costs
An empty field is not a gap. It is a decision the factory makes for you, and it makes that decision with its own margin in mind.
| Missing | What the factory does | What it costs you |
|---|---|---|
| Fabric weight | Picks a cloth that matches the name | A lighter garment, and a price that looked good |
| Trim reference | Substitutes a local zip or button | A failed pull test, or a colour that does not match |
| Seam type | Sews the fastest seam it owns | A second quote that was never for the same garment |
| Tolerance | Uses its own working range | A bulk you cannot reject, because nothing was written |
| Grading rule | Scales the block by eye | Returns in the outer sizes, on the second order |
The bill for a thin pack arrives in three places. One extra sample round, one fabric lot that has to be replaced, and two weeks that move the delivery date.
None of the three appears on the quote. All three appear in the margin, which is why a pack is worth more than the discount it delays.
Tech Pack, Spec Sheet and Pattern
Three documents get called the same thing in a first conversation. They are different objects with different owners.
The tech pack is the description. It says what the garment is and how it is made, and it belongs to the buyer.
The pattern is the geometry. It is the block the cloth is cut from, and it is derived from the pack. A pattern can be correct and a pack wrong, and the garment will still be wrong.
The spec sheet is the wider term. For a moulded part it carries tolerances in fractions of a millimetre, and it is the document a tool is signed off against. The same discipline for a moulded part shows how that version is written, and where a garment version has to differ.
The pack is the first step of a longer order. What a private label garment order commits to is the wider view around it, from the label build to the deposit.
For a garment, the pack is the parent and the other two are children. That is the whole distinction, and getting it the wrong way round is how a buyer pays for a pattern twice.
The label page is the only page with a legal floor under it. Fibre content has to be declared, and where the fibre share has to be declared is set in 16 CFR part 303. The care line rests on evidence, under the rule that puts the care line on the label at 16 CFR part 423. Origin is the third line, and the marking rule that applies to every import sits at 19 CFR part 134.
Five Mistakes That Cost a Sample Round
A sample round is four to six weeks and a courier bill. These five send it back to the start, and every one of them is visible on the page before it is sent.
One: a drawing with no seam allowance. The pattern maker guesses, the garment comes back 1 cm narrow, and the block is redrafted.
Two: a size table with no measuring point. Chest written as a number tells the sample room nothing if the reference line is missing. Two people measure two different places.
Three: a colour given as a screen image. A dye house cannot match a monitor. The swatch has to be physical, and it has to travel with the pack.
Four: a trim that exists only in a photograph. If the zip has no size, no finish and no reference, the sample arrives with the nearest local part. The quote was for that part.
Five: no sealed sample from the last round. Without a signed and dated piece, the bulk is judged against memory. The questions that belong before the pack is sent covers the supplier side of the same problem.
Questions Buyers Ask About Tech Packs
What is a tech pack in clothing?
A file of drawings, measurements, construction notes and materials that describes one style well enough for a factory to make it without asking a question. It is the document the price is built from, and it belongs to the buyer.
What is the difference between a tech pack and a spec sheet?
For a garment, the tech pack is the parent document and the spec sheet is the measurement part of it. For a moulded part the spec sheet is the whole thing, because there is no fabric and no grading. Same discipline, different scope.
How many pages should a tech pack have?
Six for a simple shirt and up to twenty for a lined jacket. The count follows the number of questions a factory would otherwise ask. A pack with twelve pages and no tolerance column is thinner than one with six that are complete.
Can I make a tech pack myself?
Yes, if you can draw a flat and measure a garment. Two parts are worth paying for: the grading table, which needs a fit check, and the size table, which needs a reference point on every line. The rest is writing.
What is a grading table?
A rule that turns the base size into the rest of the range, point by point. It is not the same as the size table. A size table states one size, and a grading table states how much each point grows between sizes.
Do I need a tech pack to order a sample?
You need enough of one to be measured. A sample made without a pack is a sample of the factory’s block, not yours, and the price you receive is for that block. The first pack usually pays for itself in one round.
The Bottom Line
A tech pack is not a design file. It is the document three factories price from, and the only way three prices can be compared.
Six pages, twelve points, one weight line and a grading rule. Fill those and the factory has nothing left to assume, which is the whole point of sending it.
Send the Pack, Get the Gaps
Send the tech pack and any quote you already hold. We will read the six pages, name the fields a factory would fill itself, check the fabric weight and the tolerance column, and tell you which of the five mistakes is likely on this style before a sample is cut.
Send the Pack
Questions & Comments
We read every one and reply within 24 hoursSent a pack and got three quotes you cannot compare? Tell us the style and what each supplier asked about. We will say which field each question was really about.