Yoga Wear Manufacturer: Four Numbers Before You Order
Home
Yiwu, Zhejiang, China
Mon – Fri 9:00 AM – 6:00 PM · Sat 9:00 AM – 4:00 PM
[email protected]

Yoga Wear Manufacturer: The Four Numbers That Decide Whether It Sells

Alan Xiao, Founder of Sourcing Pioneer
Alan Xiao Founder, Sourcing Pioneer
· Updated October 26, 2026 · 11 min read

A yoga wear factory is easy to find and hard to brief. Most pairs of leggings fail for four reasons, and all four are numbers you can write on a spec sheet before the first sample. Get them wrong and the returns arrive eight weeks after the goods do.

Studio still life on a flat cream surface showing folded navy leggings, a rolled knitted fabric swatch, a tape measure and a white spec sheet, with a navy serif headline reading YOGA WEAR FACTORY and an amber subhead reading FOUR NUMBERS
Four numbers on a sheet decide how the finished pair behaves.

The Short Answer

Ask the factory for four figures before you talk about price. Fabric weight in grams per square metre. Elastane percentage. Stretch recovery after repeated extension. Shrinkage after three washes.

Those four decide how the leggings feel, how long they keep their shape and whether they stay opaque when the wearer bends. Price is a result of them, not a separate conversation.

Two more things belong on the same sheet. The seam type, because a cheap seam fails first at the crotch. And the size grading table, because a factory with one base size cannot grade a full range well.

What a Yoga Wear Factory Actually Makes

Most factories in this category are knitwear or activewear plants that added a line. They cut and sew fabric they buy from a knitting mill, or they knit and dye in house.

The second kind is worth more to you, and it is not always more expensive. A plant that knits its own fabric can change a colour in days. A plant that buys fabric adds two weeks and a minimum order in kilograms.

The product range is narrow. Leggings, shorts, sports bras, tops, jackets, and sometimes socks. A factory that makes all six well is rare, so ask which one it makes most of.

The answer tells you where the pattern blocks are good. A plant that runs leggings every week has a tested block in six sizes. A plant that makes them twice a year will draft yours from scratch and the first sample will show it.

Fabric Comes First: The Four Numbers

Yoga wear is usually a knit of nylon and elastane, or polyester and elastane. The fibre choice sets the hand feel and the price, and the numbers below set the performance.

Weight is written as grams per square metre, or GSM. Light leggings sit near 200 and heavy ones near 300. Below about 220 the fabric shows every seam line and reads as thin in the hand.

Elastane is the stretch. Most leggings carry 15 to 25 percent, and the share matters more than the name on the yarn. A pair at 12 percent will feel different after twenty washes.

Recovery is what the fabric does after it is stretched. A knit that returns to shape holds the waistband up. A knit that stays stretched leaves a baggy knee by lunchtime, and no amount of good sewing fixes it.

Shrinkage is measured after washing, and it is where sizing goes wrong. A fabric that shrinks 6 percent turns a size medium into a small. Ask for the figure after three washes, not one.

NumberTypical rangeWhat it decides
Weight (GSM)200 to 300Hand feel, seam show-through, how thin it reads
Elastane share15 to 25 percentStretch, and how the pair feels after 20 washes
RecoveryAsked as a percentage after repeated stretchWhether the waistband still holds on day 60
ShrinkageMeasured after three washesWhether a medium still fits as a medium

None of these numbers is secret. Factories know them and will give them when asked in this form. What they will not do is volunteer them, because a buyer who does not ask is a buyer who cannot compare two quotes.

The sheet itself is the same document that carries your construction notes and your packing rules. The sheet a factory can quote from is worth reading once before you send the first enquiry.

Opacity Is a Specification, Not a Promise

Squat proof is the phrase every seller uses and no factory can guarantee. Three things decide it: how tightly the knit is set, how much elastane it holds, and whether a second layer covers the seat.

The point where cheap pairs fail is the stretched zone, not the flat one. Fabric that looks solid on a table turns see-through across a bend, because stretching opens the loops.

You can test this in ten minutes with the sample. Put the fabric over a phone light in a dark room. Stretch it to the width it reaches on a hip, then look for pin holes.

Then write the result into the sheet as a requirement. Either a second layer in the seat, or a stated minimum weight, or a colour that hides what a light colour shows. A written line is something a factory can meet and an inspector can check.

Two Seams Decide Where It Fails

Most leggings that split do it at the crotch or along the inner leg. Both are seam decisions made long before the price is agreed.

The first is the seam type. An overlock stitch is fast and cheap, and it leaves a ridge that rubs. A flatlock stitch joins two layers edge to edge with no ridge, and it costs more because it is slower.

For yoga wear the flatlock is the normal choice on the side and inner leg. Ask for it by name on the sheet, because a factory that quotes an overlock will not raise the subject.

The second is the gusset. A crotch panel spreads the stress across a wider area and removes the four-way join that fails first. Some factories leave it out to save a piece of fabric.

Ask for a photo of the inside of the crotch on the first sample. If four seams meet at a point, the pair will fail there, and no inspection later in the process will change that.

The waistband is the third stress point, though it rarely splits. A wide knit band holds better than a narrow elastic one, and it survives more washes. Ask which type the quote includes.

The Three Samples, and What Each One Answers

Sampling in this category is not one step. Three rounds answer three different questions, and skipping one moves the problem to a later stage where it costs more.

The fit sample answers whether the pattern works. It is made in one size from stock fabric, and it is judged on the body: rise, waist height, leg length, how the band sits. Expect two or three tries before this is right.

The sales sample answers whether the colour and the fabric work together. It is made in the final fabric, in the final colour, with the final print. This is the piece your photographs are taken from.

The pre-production sample answers whether the factory can repeat the sales sample. It is made on the line, by the people who will run the order, from the approved fabric lot. If it differs from the sales sample, the difference will appear in the bulk.

Flat vector diagram in three numbered steps on a cream background, first headed Fit Sample with a dress form icon, second headed Sales Sample with a camera icon, third headed Pre-Production Sample with a sewing machine icon
Three rounds, three questions. Skipping one moves the cost, it does not remove it.

Each round should end with a signed and dated sample, kept by both sides. That signature is what the bulk is measured against later. Without it, the argument becomes a memory test.

The Size Grading Trap

A factory quotes per piece and thinks in one size. Your customer buys a range. The gap between those two facts is where most first orders go wrong.

Grading is the rule that turns one pattern into five or six sizes. It is not arithmetic on every measurement, because different parts of a garment grow at different rates. A waist may grow 5 cm across the range while a thigh grows 9 cm.

Ask for the grading table with the first quote. If the factory cannot produce one, it has a base size and no rule, and the larger sizes will be stretched copies of the medium.

Then check two sizes in the fit round, not one. A size small and a size extra large, made from the same pattern, show whether the rule holds at the ends. The middle sizes usually take care of themselves.

This is also where a good vendor earns its fee. Choosing a vendor for a size range is a different job from choosing one for a single style.

Why the Minimum Is Really Set in Kilograms

The quote says 300 pieces. The constraint behind it is usually 300 kilograms of knit fabric, and that is what sets the real floor.

Knitting mills sell by weight, and a custom colour or a custom knit has its own minimum. A mill that needs 200 kilograms per colour will not run 40 for a test order, however small the garment order looks.

So the two minimums are linked. Change a colour after the sample stage and you re-open the fabric order, not just the sewing line. That is why a late colour change costs weeks, and why factories ask for the colour decision early.

There are three ways through. Use a stock colour the mill already runs, which drops the fabric minimum to a roll. Choose a fabric the factory keeps in house, which limits you to their palette. Or accept the kilogram minimum and plan two or three colours in the same order.

The third route is usually the cheapest per unit and the hardest to plan. It needs a colour decision before the fabric is knitted, and it leaves you holding stock of a colour that may not sell.

Flat vector diagram in four columns on a cream background headed SWEAT, PILLING, RECOVERY and SHRINKAGE with icons of a water drop on fabric, pills on a knit surface, a stretched band and a washing machine
Four tests, four questions. All four can run on the sales sample.

The Four Tests That Predict Returns

Four laboratory tests catch most of what a customer complains about later. None of them is expensive, and all four can be run on the sales sample before the bulk order starts.

Colourfastness to sweat checks whether the dye moves when the skin is damp. It matters most on dark colours and on anything worn against the body for an hour.

Pilling checks whether the surface forms small balls of fibre where it rubs. It is scored on a scale from one to five, and a low score on a soft knit is normal, not fatal. Ask for the score and take the decision yourself.

Stretch recovery checks whether the fabric returns to its size. A pair that grows 4 cm at the knee in a day is a return, however good the seams are.

Shrinkage checks what the wash does, and it is the one that changes the fit. Measure the same points before and after three washes at the temperature on your care label.

TestThe question it answersWhat to ask for
Colourfastness to sweatDoes the dye move on damp skin?The grade, on the final colour
PillingDoes the surface ball where it rubs?The score on the one to five scale
Stretch recoveryDoes it return to size after wear?The percentage after repeated extension
ShrinkageDoes the fit survive the wash?The figure after three washes

A factory that runs these on its own account has the numbers on file. A factory that has never been asked will offer to send the sample to a lab, which takes a week and costs a fee. Either answer is workable. A refusal is the answer that matters.

Before the bulk run starts, the fabric should also pass a roll check. The four-point method for scoring a roll is the check to run first. A defect found on the roll costs less than the same defect found in a finished pair.

Who Owns the Label

The factory prints the care label. You own what it says. That split is the part buyers miss, and it turns a printing job into a legal duty.

In the United States, the fibre content rules sit in the fibre content rules at 16 CFR part 303. They cover how each fibre is named and how a small share is shown. They also cover when the word all or 100 percent may be used, and the tolerance on a stated share.

A separate rule on care instructions sits in the care labelling rule at 16 CFR part 423. It deals with what the label must say about washing, drying and ironing, and it applies to the garment as sold.

So the sequence matters. Test the fabric, read the result, then approve the label. A factory that prints 80 percent nylon before the test comes back has printed a claim nobody has checked.

Keep the test report with the label artwork. If a market regulator or a marketplace asks later, the report is what shows the claim was reasonable at the time.

What Actually Moves the Quote

Two quotes for the same style can differ by half, and the difference is rarely the sewing. It sits in five places, and each one is visible if you ask.

Fabric is the largest. A move from 220 to 280 GSM adds weight per pair, and weight is what the mill charges for. Colour count is next, because each new colour carries a mill minimum.

Seam type is third. A flatlock line is slower than an overlock, and the difference shows up per piece, not per order.

Order size is fourth, and it works through setup, not through labour. The same cutting and pattern work is spread over more units.

Packaging and testing are fifth, and they are the easiest to strip out of a quote without noticing. Ask for them as separate lines so you can see what was removed.

The written order matters as much as the price. What the contract has to say decides what happens when the bulk does not match the sample. The wider supplier brief is in the six questions to ask any clothing manufacturer.

Questions Buyers Ask About Yoga Wear Factories

How much does it cost to make leggings in China?

The price per pair moves with fabric weight, colour count, seam type and order size. Fix those four first, then ask three factories for a quote.

What is the minimum order for yoga wear?

Factories usually quote 200 to 300 pieces. The real floor is the fabric order, which is often 200 kilograms per colour.

How long does sampling take?

Each round takes one to two weeks, and there are three rounds. Plan six to eight weeks from first enquiry to approved pre-production sample.

Can a factory copy my design from a photo?

It can approximate one, and the result will not fit. Send a tech pack with measurements and a construction note, or pay for pattern development.

Do I need a certificate to sell leggings in the US?

There is no general certificate for apparel. The duties are the fibre content label and the care label, and both are yours.

What is the main reason yoga wear gets returned?

Two reasons: the fabric turns see-through when stretched, and the fit changes after the first wash. Both are fabric numbers you can fix before bulk.

The Bottom Line

Find the factory second. First decide the four numbers, the seam type and the size rule, because those six lines are what a factory can quote against.

A brief with them gets three comparable prices. A brief without them gets three prices for three different products, and the cheapest one is usually the thinnest fabric.

FOUR NUMBERS

Send the Fabric, Not the Photo

Send us the style, the target price and any fabric details you already have. We will write the four numbers into a spec sheet, mark the tests to run before bulk, and tell you which factory type fits the order size.

Send the Brief

Questions & Comments

We read every one and reply within 24 hours

Bought a pair of leggings that went see-through on the second wear? Tell us the fabric weight, the elastane share and how it was washed. We will say which number was wrong.

Subscribe
Notify of
guest
0 Comments
Most Voted
Newest Oldest
0
Would love your thoughts, please comment.x
()
x