What Is A Tennis Bracelet: Stone Count, Setting And Factory Cost
A tennis bracelet is one row of matched stones, each in its own setting, joined so the whole line bends around the wrist. The stones run the full length. There is no centre stone and no pattern. That is the whole design, and it is also why two bracelets that look the same on a screen can sit at very different costs.
The name came from a tennis match, or so the trade’s own account of the story goes. A player’s diamond line bracelet came apart during a match in 1987 and the game stopped while the stones were picked up. The trade kept the name. Nobody in a factory uses it, because the piece has a technical name of its own: a line bracelet.
This page is written for the buyer who has to price one. It covers what makes a bracelet a tennis bracelet, and why the stone count on its own means nothing. It also covers how the setting choice changes the labour, and which three lines decide most of the invoice.
The Short Answer
A tennis bracelet is a flexible line of uniform stones, set close together and linked so the piece drapes. The stones are usually round brilliant diamonds, and they are usually small.
Four things separate it from a bangle or a chain with a charm:
The stones are continuous, not clustered. The line runs the whole way round, with no gap in front and no focal point.
Each stone sits in its own setting. On a cheap piece they are glued or set into a cast strip. On a real one each stone has its own seat, and the metal between two stones forms a hinge.
The stones are matched. Colour and size have to flow, because the eye reads the line as one object. A single dark stone in the row is visible from across a table.
The piece bends. A bangle is rigid. A tennis bracelet is a chain of small joints, and that is what lets it sit flat on the wrist.
Everything after this point is about the numbers behind those four sentences: how many stones, how big, how wide, and what holds the end closed.
Stone Count On Its Own Means Nothing
Buyers ask for a carat weight and a stone count. Suppliers answer with both. Neither number tells you what the bracelet is. They are linked by a third number that nobody quotes: the pitch, the distance from one stone centre to the next.
Pitch is the real design decision. Set the stones further apart and you need fewer of them for the same length, but the metal gaps grow and the line looks broken. Set them closer and the stone count rises while each stone shrinks.
Three real mountings show the spread. All are seven inches, all are round stones, all are three or four prong. The sizes below come from a supplier’s mounting catalogue, where the same page lists the stone count and the stone size side by side.
| Stones | Stone size | Pitch over 7 in | Metal gap |
|---|---|---|---|
| 39 | 3.6 mm | 4.56 mm | 0.96 mm |
| 53 | 2.7 mm | 3.36 mm | 0.66 mm |
| 64 (7.5 in) | 2.4 mm band | 2.98 mm | 0.65 mm |
Read the last column and a pattern appears. Whatever the stone size, the metal between two stones lands between about two thirds of a millimetre and one millimetre. That gap is a hinge. It has to be wide enough to bend and narrow enough to disappear.
So a 39 stone bracelet and a 64 stone bracelet are not a small and a large version of the same thing. They are two different products that happen to share a name and a wrist.
The same arithmetic explains why a carat total is weak on its own. A three carat piece split into 64 stones gives about 0.047 carat each. The same three carats in 30 stones gives 0.10 carat each, and the bracelet looks like a different object.
A Ten Second Check On Any Quote
The trade has a rough rule that links a round stone’s diameter to its weight. Carat is about the diameter in millimetres, cubed, times 0.0037.
Work it on the three mountings above. A 3.6 mm stone gives 0.17 carat, and 39 of them make 6.7 carat against a stated 7. A 2.7 mm stone gives 0.073 carat, and 53 of them make 3.9 carat against a stated 4.18. A 2.4 mm stone gives 0.051 carat, and 64 of them make 3.3 carat against a stated 3.0.
All three sit within about ten percent. That is enough to use the rule as a filter, not as a certificate. If a quote says forty stones of 2 mm and four carats, the rule gives 1.2 carat and something is wrong with the sheet.
Two limits keep it honest. The rule is for round brilliants, and it drifts for shallow or deep cuts. And it assumes the stones are the size stated, which is exactly the number a sloppy sheet leaves out.
Five Settings, Five Cost Stories
The setting is the part of the bracelet a photo cannot show. It decides how much metal each stone needs, how many hand operations it takes, and how the piece ages.
Suppliers quote four families, and the names a jeweller uses for them are prong, bezel, claw and channel. A fifth is a variation that saves metal on small stones.
Four prong. Four claws grip each stone. This is the most secure of the open settings, and it needs the most metal of them. It is also the slowest, because every claw is bent and filed by hand.
Three prong. One claw fewer, and the trade uses it to put more stone into the same width. Both products in this article’s data use three or four prong on a seven inch line.
Two prong. Two claws only, which leaves the stone open to the sides. It shows more metal-free surface and it costs less to set. It also gives up grip, which matters on a piece that swings against a wrist all day.
Shared prong. Two neighbouring stones share one claw between them. On smaller stones this saves metal and keeps the line tight. It is the usual answer when the design calls for many small stones, not fewer large ones.
Bezel. A full rim of metal wraps each stone. The trade also calls it a rubover. It is the most secure option and it protects the girdle, which is the thin edge of a diamond and the part that chips. The cost is light: less enters the stone, so the line reads calmer and slightly wider.
Channel. Two continuous walls of metal hold the row, with the stones set between them. Metal per stone is low because the wall is shared by the whole line, and security is high because there are no claws to catch. The wall has to be milled true, and that is where the skill sits.
| Setting | Metal per stone | Light into stone | Weak point |
|---|---|---|---|
| Four prong | High | Most | Claws catch on knitwear |
| Three prong | Medium | High | Fits more stones, so less metal between them |
| Two prong | Low | High | Grip, on a piece that moves |
| Shared prong | Lowest | Medium | One bent claw loosens two stones |
| Bezel | Highest | Least | Nothing, but it hides the stone’s edge |
| Channel | Low per stone | Medium | A milled wall that has to be true |
Notice what the table does not contain: a price. There is no fair way to put one there. The labour rate and the metal price on the day of the quote are yours to check. What the table gives you is the direction each choice moves the invoice, and that is enough to ask a better question.
The better question is not “how much per piece”. It is “how many setting operations and how many minutes”. A forty stone bracelet has forty settings whatever the family, and the difference between two quotes on the same design is usually in that number.
Width Is The Line That Hides The Metal
Two lines in a specification carry more weight than any other, and both are usually missing from a quotation. The first is the band width. The second is whether the links are solid or hollow.
Width is easy to read once you look for it. One of the mountings in the data is 2.40 mm wide. Another is 4 mm. That is a different object on the wrist. It is also a different amount of gold, because metal weight climbs with width and thickness together.
Solid against hollow is the quieter decision. A hollow link uses a formed shell instead of a solid section, so it looks the same in a photo and weighs far less. One supplier lists “Solid” as a feature line of its own, which tells you the other kind is on the market.
Neither choice is wrong. A hollow piece can be a sensible product at a lower price, as long as the listing says so and the price reflects it. The problem is a hollow piece sold as solid, and the only defence is a weight per piece in grams on the specification sheet.
Ask for three numbers together: band width in millimetres, metal weight per bracelet in grams, and a statement of solid or hollow. Any quote missing one of the three cannot be compared with the others. The cheapest quote in the inbox is often the hollow one that forgot to mention it.
The metal also raises the question of who answers for it. If the order runs through a trading company and not the workshop, that question gets harder. The difference between a workshop and a trading company is where the answer starts.
The Clasp Is The Only Part That Loses Everything
A tennis bracelet has one failure mode that no other jewelry category shares. If an earring opens, you lose one stone. If a bracelet opens, you lose the whole line.
Both products in this article’s data close with a box clasp and a safety. That combination is the standard for the category, and it is the minimum a buyer should accept.
A box clasp works by sliding a tongue into a box, with a spring tongue that snaps into a notch. It sits flush with the line, which is why it is used here: nothing sticks out to catch on a sleeve.
The safety is a second, independent closure. It can be a fold-over bar or a figure of eight catch. Its job is to hold when the main tongue fails, which is the failure that actually happens, because a spring weakens with use.
Three lines belong in the clasp spec: the clasp type by name, the safety type, and the metal of both. Then add a pull test to the inspection list, because a clasp that opens under a light pull will open on a wrist.
The rest of the check is ordinary factory work. The sequence that catches a clasp fault before the cartons close is set out in the visit that tests what the eye cannot. On this product the test list is short: clasp, safety, stone grip, and the flex of every joint.
Small Stones Are Sold By The Parcel
A tennis bracelet is built from small stones, and small stones do not come with individual certificates. They come in parcels, sorted by size, and graded as a group.
You can see the shape of it in a live product listing for a 64 stone line. The full stone grade reads as two ranges: clarity SI1-SI2, colour G-H.
That is not a trick. At this size the grading cost per stone exceeds the value of the stone. So the trade grades the parcel, and the buyer accepts a spread. What matters is that the spread is written down and stays inside a limit.
Four things belong in the stone line of an order. The grade range, stated as ranges. The stone size in millimetres, not only in carat. The number of stones that may sit outside the range, stated as a count. And whether the stones are natural or grown in a lab, because both are sold under the same words.
Without the fourth line you will get whichever was cheaper that month, and the word diamond on its own does not settle it.
Six Lines For The Order
Everything above collapses into six lines. If your sheet carries these, a supplier can price the design and an inspector can check the shipment against the same page.
| Line | What to write | What it protects |
|---|---|---|
| 1. Count and size | Number of stones, and diameter in millimetres | Stops a carat total standing in for a stone size |
| 2. Pitch | Centre to centre distance, with a tolerance | Fixes the look and the hinge width at once |
| 3. Setting | Family and prong count per stone | Decides metal use and setting operations |
| 4. Band | Width in mm, metal weight in grams, solid or hollow | Stops a hollow piece arriving at a solid price |
| 5. Clasp | Clasp type and safety type, each by name | The only part whose failure loses the whole line |
| 6. Stones | Grade ranges, stones allowed outside, natural or grown | Turns a verbal promise into a countable limit |
Line one deserves a note. A count with no size is the most common shape of a bad sheet. It is how a supplier can answer a request for a three carat line with sixty four small stones, or with thirty larger ones. Both answers are correct.
Line five is the one that gets dropped when a quote is copied from an older product. Copy a clasp line from a necklace and you will get a lobster claw. That is fine on a chain. On a line of stones it opens, and the whole piece reaches the floor.
The rest of the sheet follows the same pattern as any other jewelry order. The general structure is in the specification sheet a factory can build to. What changes here is only the arithmetic: count, size, pitch, weight.
Where the order needs a box that survives shipping and reads on a shelf, the packaging is a separate specification. The insert that holds a bracelet flat is the line to get right. A line bracelet that arrives kinked has already failed at the customer.
And if the piece is being developed from scratch, and not copied from a catalogue, there is a sequence to follow. It runs from drawing to first sample, and how a bracelet order is developed with a factory sets it out. That is where the pitch decision belongs, before the mould exists.
Send the quotation you have, plus the stone count and the band width on the sheet behind it. I will run the carat and pitch arithmetic, see whether the two agree, and name the lines your supplier left out. One page back, and a set of numbers you can take to the factory on Monday.
Send The QuoteQuestions Buyers Ask
How many diamonds are in a tennis bracelet?
It depends on the pitch, not the length. Over seven inches, real mountings run from 39 stones at 3.6 mm to 53 stones at 2.7 mm. A 7.5 inch line of 2.4 mm stones carries 64.
Is three carats a lot for a bracelet?
Not on its own. Three carats split into 64 stones is about 0.047 carat each, a fine line. The same three carats in 30 stones reads as a much heavier piece. Always ask for the count with the carat.
What is the difference between a tennis bracelet and a bangle?
A bangle is rigid and slides over the hand. A tennis bracelet is a series of small hinged links, so it bends and lies flat on the wrist. The hinge is why the gap between stones matters.
Why is it called a tennis bracelet?
As the story goes, a player’s diamond line bracelet came apart during a match in 1987 and play stopped while the stones were recovered. The trade kept the name; the technical name is a line bracelet.
Do the diamonds come with certificates?
Usually not, at this size. Stones are sold in graded parcels, so the sheet reads as a range such as G-H colour and SI1-SI2 clarity. Ask how many stones may fall outside that range.
Which clasp should I specify?
A box clasp with an independent safety, named in full on the sheet. The safety is a second closure, and it is what holds when the main tongue weakens. Add a pull test to the inspection list.
Questions & Comments
We read every one and reply within 24 hoursIf you have a quote in hand, the fastest test is arithmetic. Multiply the stone count by the size cubed and compare it with the carat total. Send me the sheet and I will run it, then tell you which of the six lines is still missing.