Types of Water Filter: The Pore Size Sorts Them
Home
Yiwu, Zhejiang, China
Mon – Fri 9:00 AM – 6:00 PM · Sat 9:00 AM – 4:00 PM
[email protected]

Types of Water Filter: The Pore Size Sorts Them

Alan Xiao, Founder of Sourcing Pioneer
Alan Xiao Founder of Sourcing Pioneer
· Updated November 3, 2026 · 9 min read

Every water filter is sold on a material: carbon, ceramic, membrane, resin. The material matters less than one number, and that number is the pore size.

Pore size sets what cannot get through. It also sets the pressure the system needs and the price per litre. Two filters with the same body and other pore sizes are other products.

Warm beige studio still life of a white ceramic filter candle beside a folded specification sheet and a small measuring rule
The body is the same. The cut-off is the product.

The Number That Sorts Everything

Membrane filters are classed by the smallest particle they hold back, and the classes have published ranges.

ClassPore sizeDriving pressureHolds back
Microfiltrationover 0.1 µmbelow 2 barlarger bacteria, yeast, bits
Ultrafiltration100 to 2 nm1 to 10 barbacteria, proteins, larger viruses
Nanofiltration2 to 1 nm3 to 20 barviruses, two-valent ions
Reverse osmosisbelow 1 nmhigh pressuremost dissolved ions

The useful line sits at 0.2 µm. A membrane at that size holds back virtually all bits larger than itself, . That set includes Giardia and Cryptosporidium, the two germs most often behind a backcountry illness.

The same reference gives the challenge germs used to prove a pore size. A 0.1 µm membrane is tested against Acholeplasma laidlawii. A 0.3 µm membrane is tested against Bacillus subtilis spores, and a 0.45 µm membrane against Serratia marcescens.

That is why a filter claim should carry a test germ. A pore size with no test is a number on a box.

Panel showing microfiltration, ultrafiltration, nanofiltration and reverse osmosis by pore size and pressure
Four classes, and the pressure each one needs.

Six Groups, and What Each One Is For

Within those pore classes, the market sells six groups. Each one solves a other problem, and most real systems stack two or three of them.

Grit filters are spun or pleated cartridges that catch sand, rust and grit. They protect all downstream, and they are rated in microns as a plain number, not a class.

Loose activated carbon adsorbs chlorine, taste and odour compounds and some organic chemicals. Water passes through a bed of granules, so the contact time is short and the adsorption is uneven.

Carbon block is the same carbon pressed into a solid. It filters as well as adsorbs, and the tighter block removes more at a higher pressure cost.

Ceramic candles are fired diatomaceous earth with pores around 0.2 to 0.5 µm. They are cleanable and reusable, they are slow, and they crack if they are dried badly.

Hollow fibre membranes are bundles of fine tubes. One module can carry up to 10,000 fibres, each from 200 to 2,500 µm across, which is how a small body gets a large surface area.

Reverse osmosis and ion exchange are the two groups that remove dissolved matter. RO pushes water through a membrane below 1 nm. Ion exchange swaps ions for other ions, which is how a softener removes calcium and magnesium.

FamilyRemovesPressureService life
GritGrit, rust, sandLowWeeks, by load
Loose carbonChlorine, taste, odourLowWeeks to months
Carbon blockThe same, plus fine bitsMiddleMonths
Ceramic candleBacteria, protozoa, cloudinessLowYears, if cleaned
Hollow fibreBacteria and protozoa at 0.2 µmLowSeasons
Reverse osmosisDissolved ions, most of themHighYears for the membrane

What No Filter Removes

This is the part that a listing never explains, and it is the reason two filters with the same pore size can pass other water.

Filtration removes bits. It cannot remove a substance that is dissolved, and nitrates, phosphates and heavy metal ions are dissolved. A 0.2 µm membrane passes all three straight through.

Only two groups change that. Reverse osmosis and nanofiltration remove most or all dissolved minerals, and ion exchange swaps specific ions out. A carbon filter after them improves taste, and it does not add removal.

There is a twist worth knowing before choosing RO for a whole house. Water stripped of minerals is not ideal drinking water, and the World Health Organization has studied the effects since 1980.

Its advice puts a floor of 10 mg/L of magnesium, with 20 to 30 as the target. Calcium gets a floor of 20 mg/L and a target of 40 to 80, and total hardness should sit at 2 to 4 mmol/L. Demineralised water also leaches metals from piping more readily, which is a lead risk in an old building.

So the honest summary is short. A filter that removes all is not automatically the right filter.

Five Form Factors, and Where Each One Sits

The same cartridge is sold in five shapes, and the shape sets who installs it and what it costs to run.

A pitcher holds a reservoir above a small carbon cartridge and drips through by gravity. It is the cheapest way in. It is slow, and the cartridge is small.

A faucet mount screws onto a tap and diverts water through a compact block. It is fast to fit and it takes space above the sink, which matters on a shallow counter.

An under-sink unit hides a larger cartridge below the cabinet and adds a dedicated tap. It buys life and contact time, and it needs a hole in the counter or a spare tap position.

A countertop unit sits on the surface with its own spout or a line to the tap. It is the easiest to service and the hardest to keep tidy.

A whole-house system sits at the incoming main and treats every outlet. It is sized by flow rate, not by life, as a shower and a washing machine can draw at once.

The form factor also sets the honest expectation. A pitcher cartridge holds a small bed of carbon, so it removes chlorine and taste and it does little about protozoa. An under-sink block of the same brand holds several times the media.

Maintenance Sets the Second Year

A filter is a consumable. The second year decides whether it holds up.

Cartridge interval is the first line to keep. It is set by litres treated and by cloudiness, so a home on cloudy water replaces sooner than the box says.

O-ring condition is the second. A perished ring leaks slowly, and a slow leak under a cabinet is found late.

Sanitation is the third, and it is the one most often skipped. A body opened and refitted with wet hands becomes a growth surface. A filter with a dirty body can put more into the water than it takes out.

Storage matters for a spare cartridge. A block that has sat for a year in a damp garage is not the same product. One that just left the factory line still is. The wrapper is the only signal a buyer has.

Viruses Are Smaller Than the Line

The 0.2 µm line handles protozoa and bacteria, and it is honest about viruses: they pass.

The reference places virus removal at the next class down. Ultrafiltration holds back larger viruses, and nanofiltration is listed for viruses generally. A 0.2 µm cartridge does neither.

That single gap explains a market split. A backcountry filter is built for protozoa, as that is the risk on a mountain stream. A home unit that claims virus removal is built on a tighter membrane, or it adds a step that is not filtration at all.

So the question for a buyer is not which filter is better. It is which germs the water can carry, and that is a question about the source.

The Source Sets More Than the Filter

The same cartridge performs otherly on other water, and the source describes three sources with three other problems.

Deep groundwater has passed through soil and rock, so it is usually clear and bacterially clean. Its problem is dissolved mineral content, especially calcium and magnesium carbonates and sulfates, with iron and manganese in some strata.

Upland reservoirs sit above habitation and carry low bacteria counts. Their problem is colour and acidity: humic acids from forest and peat stain the water, and low pH needs correcting.

Rivers and lowland water carry a significant bacterial load, plus algae, suspended solids and dissolved constituents. This is the source that needs the most treatment, and the one where a grit pre-filter earns its place.

Read that way, the filter list shrinks. Clear groundwater with a mineral problem needs a membrane or ion exchange. Peaty surface water needs carbon and pH correction before anything fine. A river needs staged treatment, and one cartridge will not do it.

The Portable Four, for Camping

Outdoor filters are a narrow slice of the market, and they reduce to four product shapes. All four live or die on the same 0.2 µm line. That is the whole market.

Squeeze filters are a hollow fibre cartridge screwed to a soft bottle. They are the lightest option and the slowest, as the user supplies the pressure.

Pump filters add a handle and a piston. They are faster and heavier, and the pump seal is the part that fails.

Gravity systems hang a bag above a cartridge and let weight do the work. They suit a camp and not a trail, as the bag has to hang.

UV pens sit in a other class entirely. They do not filter, they irradiate, so they inactivate what the light reaches and leave grit in the water.

One useful detail sets satisfaction more than the pore size. A unit that clogs in a day is one the buyer stops carrying. The pre-filter and the backflush port matter as much as the membrane.

Six Lines for a Filter Order

An order that can be checked is written in six lines. Each one is a number or a named test, and each one is where two quotes can match on price and differ on the product.

The pore size, with the test germ. The cut-off in microns and the organism used to prove it. A size with no test is a label.

The media and the body. Carbon block density, ceramic thickness, fibre count, and the plastic the body is moulded from.

The flow rate at a stated pressure. Litres per minute at a named inlet pressure. A flow figure with no pressure can mean anything.

The life before change. Litres or gallons, at a stated water quality. A life quoted on clean water is optimistic.

The pressure it must survive. Burst pressure and the working pressure. This is the line that separates a domestic unit from a mains-fed one.

The cert, by name and number. Which scheme, which clause, which certificate. A logo alone cannot be checked.

Spec lineExample of a stated valueWhat it protects
Pore size and challenge0.2 µm, tested to 0.3 µm sporesThe claim itself
Media and bodyBlock carbon, food-grade bodyTaste and safety
Flow at pressure1.5 L/min at 2 barUser experience
Capacity2,000 L at stated cloudinessCost per litre
Burst pressureTested to twice working pressureLeaks and failures
CertScheme, clause, certificate numberMarket access

Written down, those six lines form a sheet a filter factory can quote on, . The pore and burst lines are then the script for the burst test on a shipped batch.

Flow rate is the line most often dropped, and it is the one a buyer notices first. If a batch arrives slow, the claim that follows a slow batch rests on the pressure the test was run at.

Filters are bulky and light, which is the worst combination for freight. What the carton weighs when it lands is decided by volumetric weight, not by the product.

The four membrane classes, their pore ranges and the challenge germs come from the entry on water purification and the entry on membrane filtration.

Panel of six water filter specification lines from pore size and test germ to cert number
Six lines, and the one most buyers drop.

Questions Buyers Ask About Water Filters

What are the main types of water filter?

Six groups: grit, loose carbon, carbon block, ceramic, hollow fibre, and the two dissolved-matter groups, reverse osmosis and ion exchange.

What pore size do I need for drinking water?

0.2 microns is the useful line. A membrane at that size holds back virtually all bits larger than itself, including Giardia and Cryptosporidium.

Does a carbon filter remove heavy metals?

Not as a rule. Heavy metal ions are dissolved, and filtration removes bits. Only reverse osmosis, nanofiltration or ion exchange change that.

Is reverse osmosis better than a filter?

It removes more, and it also strips minerals. Water at very low mineral content is not ideal to drink, and it leaches metals from old piping more readily.

Why does my filter slow down?

Because the cartridge is loading with what it has caught. A pre-filter and a backflush port extend the interval, and no membrane avoids it.

Do UV pens filter water?

No. A UV pen inactivates germs with light. It does not remove grit, and cloudy water shields the germs it is meant to reach.

The Short Version

Sort by pore size first, as that is the only line that sets what cannot pass. Then decide whether the water has a dissolved problem, as that is the only reason to move from filtration to a membrane.

Then write the flow rate, the life before a change and the burst pressure on the order. Those three lines decide whether the unit works in a real kitchen, or only on paper in a meeting room.

PORE AND BURST

Two Lines Decide the Claim

A filter quote that lists a body size has described a shell. Send the pore size, the test germ and the burst pressure you need. We will tell you which two lines carry the cert and which one a sample can prove.

Send the Brief

Questions & Comments

We read every one and reply within 24 hours

A water filter is sold on a material and judged on a pore size, and the second number is the one that decides the claim. Tell us the water you are treating and we will say which two lines settle the order.

Subscribe
Notify of
guest
0 Comments
Most Voted
Newest Oldest
0
Would love your thoughts, please comment.x
()
x