Types of Jackets: Twenty-Four Styles and What Each One Costs to Make
A jacket name describes a pattern. The price comes from four parts behind that pattern: shell, lining, filling and hardware.
Two bomber jackets can share a name and sit far apart in cost. One has a nylon shell, a mesh lining and a plastic zip. The other has a bonded softshell, a quilted lining and a metal zip with a branded pull.
So this page lists the styles buyers actually order, then shows what each one is built from. That is the part a style guide never tells you and a factory quote always assumes.
The Short Answer
Every jacket on this page is a shell, a lining, sometimes a filling, and a set of hardware.
The style name changes the pattern and the shell. The lining, the filling and the hardware change the price.
Buyers who compare quotes on the shell alone are comparing one quarter of the jacket.
The Map: Twenty-Four Styles in One Table
Read the table as a build sheet. Each row names the shell, what goes under it, and the closure that holds it shut.
| Style | Shell | Inside and closure |
|---|---|---|
| Leather | Hide, sheep to cow | Polyester lining, metal zip |
| Moto | Heavy hide | Quilted lining, asymmetric zip |
| Bomber | Nylon or polyester | Mesh lining, rib hem, zip |
| Varsity | Wool body, leather sleeves | Quilted lining, snap front, rib trim |
| Denim | Cotton denim | Unlined, button front |
| Trucker | Denim, shorter body | Unlined, button front, chest pockets |
| Overshirt | Brushed cotton or wool mix | Unlined, button front |
| Harrington | Cotton or poly cotton | Tartan lining, stand collar, zip |
| Coach | Nylon | Mesh lining, snap front |
| Peacoat | Wool melton | Quilted lining, double breasted buttons |
| Puffer | Nylon with a downproof finish | Baffles, down or synthetic fill, zip |
| Windbreaker | Light nylon or polyester | Mesh lining, half zip |
| Anorak | Nylon or ripstop | Half zip, hood, kangaroo pocket |
| Rain | Coated shell, taped seams | Mesh or none, storm flap, zip |
| Softshell | Bonded three layer | Fleece back, zip, sometimes a membrane |
| 3-in-1 | Outer shell plus inner jacket | Two zips, two systems |
| Track | Polyester tricot | Mesh lining, full zip |
| Quarter zip | Fleece or knit | No lining, short zip |
| Fleece | Polyester fleece | No lining, full zip |
| Hooded | Any shell above | Hood changes the pattern, not the price much |
| Chore | Canvas or twill | Unlined, button front, patch pockets |
| Military | Cotton twill or nylon | Quilted or none, four pockets |
| Safety | Polyester with tape | Mesh lining, zip, reflective bands |
| Vest | Same as the jacket it copies | No sleeves, so no sleeve cost |
Ask a plant to fill the table for the style you want. A plant that answers with a name alone has told you nothing you can price.
Four Parts, and Which One You Are Actually Buying
The shell is what you see. It sets the hand, the drape and most of the visible quality.
The lining is what the buyer feels on the arm. It is the cheapest part to swap and the hardest to check from a photo.
The filling is what makes a puffer a puffer. It is measured by weight or by fill power, and both numbers belong on the order.
The hardware is the zip, the snaps, the eyelets and the cord ends. A metal zip with a named brand is a cost line, not a detail.
The textile resources the cotton industry publishes are worth reading before you name a shell, because the same word can cover three different cloths.
The Casual Group, and Where the Cost Sits
A leather jacket is the highest risk line on this page. Hides vary in size, so a large panel can need two skins.
Ask how many hides per hundred jackets, and ask what happens to the offcuts. That answer explains most of a leather quote.
A moto adds an asymmetric zip and a quilted lining. Both are visible, both are priced separately, and both get swapped first when a quote drops.
A bomber is cheap to make and easy to ruin. The rib hem and the rib cuff are separate knit pieces, and their recovery decides how the jacket looks after a month.
A varsity is the most structured style here. A wool body, leather sleeves and a rib collar, cuff and hem are three materials and three sewing set-ups in one garment.
A denim or trucker jacket is a shirt with a heavier cloth. Fewer parts, fewer machine steps, and the cost moves with the denim weight.
The weight figure behind a shell cloth is the one number that moves a denim or canvas quote fastest.
The Weather Group, Where the Engineering Sits
A puffer is a baffle structure, not a bag of fill. The baffles are sewn channels, and their width sets where the cold gets in.
Ask for the fill weight per square metre and the fill type. Down and synthetic are priced on different scales and behave differently when wet.
A windbreaker is thin by design. The cost sits in the coating and the mesh lining, not in the shell.
An anorak is a half zip, so the neck opening has to be cut wide enough to pass a head. Ask for the opening measurement on the sample.
A rain jacket lives or dies at the seam. Taped seams are a machine step, and a quote that leaves them out is a quote for a different garment.
A softshell is a bonded three layer cloth. The bond is done at the mill, so the shell cannot be swapped without changing the supplier.
A 3-in-1 is two jackets with two zip systems that must mate. Ask for the zip spec on both halves, because a mismatch is invisible until the customer tries it.
The Sport and Warm Groups
A track jacket is the simplest construction on this page. Tricot shell, mesh lining, full zip, two pockets.
A quarter zip is a fleece with a short zip. The zip length is a spec line, and a plant will pick one if you leave it out.
A fleece is a knit with a brushed face. The brush adds weight and traps air, which is why a light fleece can feel warmer than a heavier flat cloth.
A hood changes the pattern and adds a panel, but it rarely changes the price much. It does change how the collar sits when the hood is down.
The Work Group, Where the Standard Sits
A chore coat is a canvas shirt with patch pockets. The cost sits in the cloth weight and the bar tacks at the pocket corners.
A military style is a pocket exercise. Four pockets mean four pattern pieces, four attachments and four chances to sit crooked.
A safety jacket is a set of rules before it is a garment. The reflective tape is a purchased item with its own certificate.
Ask for the tape certificate and the placement drawing. A tape that is 10 mm off the required band turns a jacket that meets the rules into stock you cannot sell.
A vest is the same jacket without sleeves. It removes the sleeve cost, the cuff cost and one sewing step, so it should be cheaper by more than buyers expect.
Three Routes to a Custom Jacket
A stock blank is a finished jacket in a fixed colour and size run. You add embroidery or a patch and ship.
ODM takes a plant’s existing block and changes the cloth, the colour and the trims. Faster than a new pattern, and cheaper than a full development.
OEM starts from your pattern. It costs a pattern fee, a sample round and a longer calendar, and it is the only route to a fit nobody else has.
Ask which route the quote covers before comparing prices. A blank plus embroidery and a full OEM run are not alternatives; they are different products.
The route also sets the minimum. A blank house sells what it has; a plant that has to cut a new pattern will ask for more pieces.
The same three-layer logic applied to a T-shirt shows how far a fibre and a knit can move a price before any decoration.
Decoration, Style by Style
Not every style takes every decoration. The shell decides, and a plant will usually not tell you until a sample fails.
Wool and canvas take embroidery well. A dense stitch sits flat on a firm cloth and pulls on a loose one.
Nylon and coated shells are the difficult pair. A print needs a surface it can bond to, and a coated shell often refuses.
A varsity is built for patches and chenille letters. The wool body holds the weight, and the seams are already there to hide the stitching.
Leather takes an embossed mark or a metal badge. Thread through a hide leaves a hole that does not close.
A puffer cannot take a large print across a baffle. The ink lands on a moving surface, and the design breaks at every channel.
How thread and ink behave on a given cloth is the reason a decoration that works on a tee can fail on a shell.
The Lining Is Where Quotes Disappear
A lining is invisible in a photo, so it is the first part a cheap quote changes.
Taffeta is the standard. It is smooth, cheap and loud when you move. Mesh breathes and shows the shell through it.
Fleece lining turns a light jacket into a warm one. It also adds bulk at the armhole, which changes the fit of the sleeve.
Quilted lining is a lining plus a wadding layer plus a quilt machine step. Three costs behind one word.
Ask for the lining by name and by weight. A quote that says “polyester lining” covers everything from thin taffeta to a bonded fleece back.
Ask to see a cut sample of the lining. A photo of the outside tells you nothing about the part that touches the buyer.
The lining sits against the neck and the wrist all day, so its chemistry matters more than the shell’s. Ask whether the cloth carries a STANDARD 100 certificate for the article you are buying, and check the scope covers both shell and lining.
Hardware: The Quiet Price Line
A zip is priced by length, by tooth material and by brand. A named zip can cost more than the cloth in the panel it closes.
Ask for the zip brand, the length and the slider type. Then ask what the plant substitutes when the brand is out of stock.
Snaps and eyelets are set with a press, so each one is a machine step. A double-breasted front with six buttons is six steps.
Cord ends, toggles and drawstring stops are small purchased parts. They are cheap per piece and easy to omit without noticing.
Write the hardware list into the order with brand and size. It is the part most often swapped between sample and bulk.
What to Check on the Sample
A jacket sample needs more checks than a T-shirt. It has more parts, more seams and more hardware.
Measure the chest, the shoulder, the sleeve and the back length. Use the washed piece, as with any garment.
Zip it up and down twenty times. A zip that catches on the tape will catch for the customer too.
Turn it inside out. Loose threads, skipped stitches and a lining cut too short all show on the inside first.
On a puffer, press the fill flat and watch it come back. Fill that stays clumped is fill that will clump after a wash.
On a rain jacket, pour water on a seam. A seam that darkens straight away is not taped.
An inspection that opens the garment up catches a lining swap before the cartons close.
What to Write on the Order
A jacket order needs a line for each of the four parts, plus the pattern and the decoration.
| Line | What it must state |
|---|---|
| Shell | Fibre, weight in g/m², finish and colour reference |
| Lining | Type, weight, colour and whether it is quilted |
| Filling | Down or synthetic, weight per m² or fill power |
| Hardware | Zip brand and length, snap size, cord ends |
| Pattern | Size set, measurement points and tolerance |
| Decoration | Method, placement in mm, stitch count or colour count |
| Quantity | Price breaks, and the size ratio assumed |
| Packing | Bag or bulk, carton count, packed weight |
| Time | Sample date and bulk date, counted from approval |
The sheet a plant will actually fill in keeps those nine lines on one page instead of three emails.
Choosing a Style for Your Market
Start from the climate the jacket will be sold in. A puffer in a hot market is a stock item with no buyer.
Then check the care route. A leather jacket needs a cleaner, and a market without one returns the product.
Then check the price band the style can carry. A varsity carries a higher price because the customer can see what went into it.
Last, check your own capacity to explain it. A technical shell needs a size chart, a care label and a sentence about the coating.
Ask the plant which style it already makes for your region. A plant that ships the same style weekly knows the faults and has fixed them.
Five Faults That Come Back
The lining is swapped for a lighter one between sample and bulk. It is invisible from outside and it changes how the jacket wears.
The rib on a bomber loses recovery, so the hem stays stretched. Ask for the rib’s elastane content and test a stretched piece.
The fill in a puffer is uneven, so one panel is flat and another is fat. Ask for the fill weight per panel, not per jacket.
A zip is downgraded to an unbranded one. The teeth look similar in a photo and feel different in the hand.
Reflective tape lands outside the placement band, so a safety jacket fails its own standard. Ask for the drawing before the run.
Questions Buyers Ask About Jacket Types
What is the difference between a bomber and a varsity jacket?
The shell and the structure. A bomber is a light nylon shell with a rib hem; a varsity has a wool body, leather sleeves and a snap front. The varsity needs far more machine steps.
Which jacket style is cheapest to make?
A track jacket or a quarter zip, because both are a simple shell with a zip and little structure. A vest is cheaper again, since there are no sleeves.
Can a puffer take an embroidered logo?
It can, on a small area and on a pocket or a chest panel. A large design across baffles pulls the fill and breaks at each channel.
Is a lined jacket always warmer?
No. A lining adds comfort and hides the inside of the shell, but warmth comes from the filling and from air trapped in the cloth.
Do I need a separate pattern for each size?
You need a size set, graded from one block. Each size is a cut file, not a new design, and the grade step is what keeps the run consistent.
What should I ask for first from a jacket factory?
The four parts on one page: shell with weight, lining by type, filling by weight, and the hardware list with brands. Everything else follows from those.
The Bottom Line
Learn the style names so you can talk to a plant. Then stop using them, and price the four parts instead.
A jacket quote that names no lining, no filling and no hardware is a number attached to a photo. Ask for the parts and the number becomes a decision.
Send the Jacket
Send the jacket you want to match and the market you sell in. We will name the shell, the lining, the filling and the hardware, get two plants to quote the same four parts, and open a sample up before you commit to a run.
Send the Jacket
Questions & Comments
We read every one and reply within 24 hoursGot two jacket quotes for the same picture and no idea why they differ? Tell us the style and the four parts. We will say which part each quote left out.