What Is Pilling: The Grade Behind The Fuzz
Home
Yiwu, Zhejiang, China
Mon – Fri 9:00 AM – 6:00 PM · Sat 9:00 AM – 4:00 PM
[email protected]

What Is Pilling: A Grade On A Report, Not A Fabric Flaw

Alan Xiao, Founder of Sourcing Pioneer
Alan Xiao Founder of Sourcing Pioneer
· Updated November 11, 2026 · 12 min read

Pilling is fibre tangling into small balls on a fabric surface.

The word is short, and it hides a measurement. The number a buyer argues about is a grade from one to five.

That grade is a visual judgement, not a machine reading. It depends on the method, the number of rubs, the light in the room and the eyes of the person grading.

Most pages on this topic stop at the cause. Abrasion, loose fibre, laundry, a cheap yarn. All true, and all useless at the point where a shipment is refused.

This article goes to the part that decides the argument. The exact grade descriptions, the half-grade rule, the light and the distance, and the seven lines a usable report has to carry.

Studio still life of folded knitted fabric in oatmeal and grey on a beige surface
Soft, open, brushed surfaces read well on a table. They also pill first.

The Short Answer

The standard gives a definition that a buyer can actually use. A pill is entangling of fibres into balls that stand proud of the fabric.

Two extra conditions come with it. The ball is dense enough that light will not pass through. It also casts a shadow.

That second half matters. Fuzz is not a pill. A raised surface is not a pill. The standard separates three surface changes, and a good report grades each one.

Pilling is the generation of pills over the surface.

Fuzzing is surface fibres roughened or teased out, with no ball yet.

Matting is the raised fibres of a napped fabric losing their direction.

All three can appear on one sample. That is why a report should carry three separate grades rather than one word.

Now the number. A grade of five means no change. A grade of one means pills of varying size and density cover the whole surface.

There is one rule that catches people who only read the headline. Except for grade five, the grade describes a change from the original state, not the look of the fabric itself.

So the grade is not a beauty score. It is a distance travelled. A smooth, expensive cloth can travel further than a cheap fleece and still end on the same number.

Why One Fibre Can Give Two Grades

Three processes run at the same time on a rubbing surface. The standard sets them out, and they explain most of the arguments heard at goods-in.

Formation. Fibres tangle and a ball appears.

Supply. More surface fibre works its way out of the yarn.

Loss. Fibre and finished pills wear away.

The visible grade is the balance of the three. Change the fibre strength and the balance flips.

A strong fibre holds a pill in place. Formation runs faster than loss, so the surface gets worse the longer it is worn.

A weak fibre lets the pill break off. Formation and loss compete, so the grade can rise and fall over the same period of wear.

Some constructions never reach the formation stage at all. The surface fibre wears away first, and the cloth stays clean.

This is why a single test result is a ranking, not a forecast. The standard says plainly that no test accelerates all three at the same rate.

Two cloths can both read three and behave in opposite ways. One is on its way to two. The other is drifting back toward four.

So the next question is never “what is the grade”. It is “at how many rubs, on which machine, graded by whom”.

Diagram comparing pill formation and pill loss rates for a strong fibre and a weak fibre over the same wear period
Two fibres, one grade. Strong fibre builds pills faster than they shed.

What The One To Five Scale Says

The scale is written in words, not in photographs. Photographs are optional support, and the standard says so.

Below is the pilling table as the standard words it. Learn the five lines and a lab report stops being a mystery.

GradeDescription in the standardWhat it looks like in the hand
5No changeSurface as it left the mill
4Partially formed pillsLoose fibre, balls not yet tight
3Moderate pilling: pills of varying size and density partially covering the surfaceClear balls over part of the sample
2Distinct pilling: pills covering a large proportion of the surfaceEven spread across most of the sample
1Severe pilling: pills covering the whole surfaceDense mat of balls, no flat areas

Grade four is the one to read carefully. Partially formed pills are still a change, and they still cost a grading point.

Half grades exist. If the sample sits between two grades, the report gives 3-4. In a digital system the same result is written 3,5.

The average is rounded too. When several specimens are graded, the mean is taken and then rounded to the nearest half grade.

That rounding rule is a useful thing to know before a claim. A 3,7 and a 3,5 can come out of the same drawer. Neither is a lie.

The three surface changes share one page and stay apart. Mixing them in a spec is the second most common mistake after leaving the method out.

NameWhat changedWhere it shows up
PillingEntangled fibre balls standing proud of the clothKnits, fleece, jerseys, blankets
FuzzingSurface fibre roughened or pulled out, no ball yetCombed cotton, brushed twill
MattingRaised fibres flattened and turned out of directionNapped and inlay fabrics

Fuzzing is the stage before pills on many fabrics. A sample graded four for fuzzing and five for pilling is telling you what happens next.

Diagram of the five pilling grades from no change at grade five down to severe pilling at grade one
Five grades, five sentences. Half grades sit between them.

The Room Decides Half A Grade

Two labs can grade the same cloth differently and both be honest. The assessment has conditions, and the conditions are written down.

The light. Artificial daylight of the D65 type, at no less than 600 lux, spread evenly over the sample.

The angle. The light source sits five to fifteen degrees off the plane of the sample.

The eye. Thirty to fifty centimetres from the sample, with normal corrected vision, and no direct view into the lamp.

The room. Darkened, so the only light on the sample is the lamp.

The reference. The untested piece sits beside the tested one, so the eye compares change rather than appearance.

Read that list again. None of it is about the fabric. All of it moves the number by half a grade or more.

There is a second safeguard. More than one person should grade, and the result is the average of their averages.

If two graders differ by a full grade on the same specimen, they assess it again. If they still differ, the report gives the minimum and the maximum as well as the average.

So a report with one grader, one number and no conditions has told you very little. It is a sentence without a subject.

This is also why a mill’s in-house figure and a third-party figure drift apart. The machine may be identical. The room rarely is.

Three Machines, One Grade

Pilling is produced by a machine and judged by a person. The ISO family splits those jobs, and the split is the first thing to check.

Part 1, the pilling box. Samples rub inside a rotating box.

Part 2, the modified Martindale. Samples rub in a circular path on a table under a set load.

Part 3, random tumble. Samples tumble freely inside a lined drum.

Part 4, the assessment. The person grades the result with the five-line table from the section above.

The three machines produce different wear, so they do not rank fabrics identically. The assessment method is shared, which makes the grades look comparable when they are not.

That is the trap. A grade of three from a pilling box and a grade of three from a Martindale are two different claims.

Each part also leaves decisions open. Load, rub count and the stage of the fabric all sit in the brand’s or the lab’s own programme.

An American mill may use a tumbler method and report a grade on a similar scale. A Chinese mill may work to a national standard. Both can be right, and the numbers cannot be placed side by side.

So do not compare grades across methods. Compare a fabric with itself, on the same method, before and after a change.

How To Read A Pilling Report

A usable report names its own conditions. Without them the grade floats, and a claim cannot be settled.

FieldWhat it settles
Which standard part was usedWhether the machine was box, Martindale or tumble
Which surface change was gradedPilling, fuzzing or matting, kept separate
Number of specimensWhether one sample carried the result
Number of observersWhether the grade survived a second pair of eyes
The mean grade, to the nearest halfWhat the number actually is
Minimum and maximum, if graders disagreedHow wide the spread was
The date, and any departure from the methodWhether the run can be repeated

Two more lines are optional and worth asking for. If photographic standards were used, the report should name them and say whose they are.

If an extreme viewing angle was used, it should say so. That second look often turns a four into a three.

The date matters more than it looks. A report from a trial lot does not cover a bulk lot, even when the construction is unchanged.

One habit saves arguments. Keep the graded sample. A number can be re-read in an hour when the physical specimen is still in a bag.

Checklist of the fields a usable pilling test report has to carry, with what each field settles
Seven fields. A grade without them is an opinion with a number.

A Five-Step Check At Goods-In

A warehouse cannot run a Martindale. It can do five things in twenty minutes, and those five settle most disputes before they start.

Step one. Pull three pieces, not one. Take them from different rolls or different cartons. A single swatch is a sample, not a lot.

Step two. Keep a control. Cut a piece from the approved sample and keep it in the same bag. Change is judged against it, not against memory.

Step three. Grade with the five lines. No change, partly formed, partial cover, large proportion, whole surface. Write the words first and the number second.

Step four. Note the conditions. Daylight through a window is not D65. Write down what light you used and at what distance you looked.

Step five. Put the numbers beside the report. Three grades, the method and the date on one sheet. Anything that disagrees goes back with the sheet attached.

This is a screen, not a test. It costs nothing, and it stops the wrong argument: a warehouse grading by feel against a lab grading by standard.

When the screen and the report disagree, the report wins. But the screen tells you which roll to send to a lab, and that is where the money is saved.

Six Lines For The Fabric Order

A grade in a tech pack is only useful when the method travels with it. These six lines do that.

One. The standard part: box, modified Martindale or random tumble. Name the part number, not the word pilling.

Two. The rub count, or the stage at which the grade is taken. The number and the stage belong together.

Three. A target for each surface change. Pilling and fuzzing get separate targets, because they fail at different times.

Four. Specimen count and who grades. In-house is fine for a screen; a named third-party lab is what settles a claim.

Five. The stage of the sample. Greige, dyed, finished, or after the care treatment your market uses.

Six. What happens at failure. Re-test, re-finish, or reject, and who pays for the second run.

Line five is the one most packs leave out. A finished cloth can gain a grade from shearing alone, so a greige result can flatter or punish the same order.

Fabric choice also sits upstream of all six. The yarn count behind the hand-feel decides how much loose fibre the surface holds in the first place.

Pile height matters in the same way. Loop pile in a terry cloth exposes far more fibre ends than a flat weave, and the test will find them.

Dense flat structures start with an advantage. A tightly packed plain weave traps fibre ends under crossing yarns, so fewer of them reach the surface.

Write the six lines into the same spec page the mill quotes against. Then have the run checked against that page.

A pre-shipment check that reads the report is cheaper than a return. It also catches the common case where the bulk cloth was never tested at all.

GRADE AND METHOD

Send me a pilling report, a fabric spec or a mill quotation. I will check which standard part was used and how many graders signed it. Then I will say whether your tech pack target can be read against that method. If a line is missing, I will name it. No cost, no obligation.

Check My Report

The Trade-off Buyers Keep Making

Soft surfaces and clean surfaces pull in opposite directions. That is the whole argument, and it is a commercial choice rather than a technical one.

Brushing, napping and loose twist all raise fibre to the surface. That is what makes a blanket feel good in the hand, and it is exactly what the rubbing machine collects.

Finishing can buy back a grade. Singeing burns off surface hairs, shearing cuts them, and an enzyme treatment smooths the yarn.

Each of those steps costs money, and each changes the hand. A cloth sheared hard enough to score a five may no longer feel like the sample the buyer approved.

One mill publishes its own working practice rather than a rule. It names a lower load for apparel and household textiles, and a higher load for workwear, upholstery and bed linen.

Treat figures like that as that mill’s programme. Useful when you buy from it, not a standard to quote at another supplier.

The order of decisions that works: pick the end use, pick the hand-feel the market pays for, then set the grade the construction can reach. Setting the grade first usually ends in a re-finish.

Retail brands face the same wall. One outdoor retailer’s own lab writes that soft, next-to-skin items will pill, and the choice is to accept a level of it.

Where A Fabric Test Stops

Every number discussed so far comes from a flat piece of cloth. A garment is not a flat piece of cloth.

Seams, waistbands, cuffs and trims rub harder than any panel. A fabric that grades four on the table can still show pills along a side seam after a month of wear.

The test also stops before the care cycle. A sample graded as finished says nothing about the same cloth after ten home washes.

Two practical fixes cost little. First, ask for one grading of a sewn sample, not only the flat cloth, when the style has heavy seams or a brushed lining.

Second, write the trim into the same spec. A brushed polyester lining against a wool face is a rubbing pair, and no fabric report covers that couple.

None of this makes the fabric grade useless. It makes it a starting number. The end number belongs to the garment, and only a garment test produces it.

Questions Buyers Ask

Is pilling a defect?

Not by itself. It is a surface change that every fabric shows to some degree, and the grade measures how far it travelled from the original state. It becomes a defect when it falls below the grade your order named.

What is a good pilling grade?

There is no universal number. Grade five means no change at all, and four means partly formed pills. The target depends on end use, market and the method, so ask the brand for its figure and the part number behind it.

Does washing cause pilling?

It can, along with dry cleaning and ordinary wear. The standard lists all three as occasions when the change appears. That is why the sample stage in the order should say whether the cloth was tested as finished or after a care cycle.

What is the difference between pilling and fuzzing?

Fuzzing is fibre roughened or pulled out of the yarn while no ball has formed. Pilling is the ball: dense enough to block light and to cast a shadow. The two are graded separately, and fuzzing is often the earlier warning.

Why do two labs give different grades for one cloth?

Because the grade depends on conditions, not only on the fabric. Light quality and level, viewing angle, eye distance, the number of graders and the half-grade rounding can each move the result. Ask for the conditions before arguing about the number.

Can pilling be removed or prevented?

Loose pills can be cut or shaved off at home, which changes the look and not the fabric. Prevention happens upstream: longer fibre, tighter twist, denser construction, and finishing that lifts surface hairs before the cloth is cut.

Questions & Comments

We read every one and reply within 24 hours

A pilling grade in a tech pack means nothing until the method is named. Tell me which part you quoted, and I will say what the number can and cannot settle.

Subscribe
Notify of
guest
0 Comments
Most Voted
Newest Oldest
0
Would love your thoughts, please comment.x
()
x