Percale: The Weave, The Count, The Label
Home
Yiwu, Zhejiang, China
Mon – Fri 9:00 AM – 6:00 PM · Sat 9:00 AM – 4:00 PM
[email protected]

What Is Percale, And Why Does The Thread Count Mislead?

Alan Xiao, Founder of Sourcing Pioneer
Alan Xiao Founder of Sourcing Pioneer
· Updated November 11, 2026 · 12 min read

Percale is a plain weave, one thread over and one under, and it is not a fibre. The word describes how the cloth is built, not what it is made of.

That single fact explains most of the confusion in this market.

A shop can sell cotton percale, polyester percale or a blend, and all three are honestly percale. The weave word sits beside the fibre word, never in place of it.

The second confusion is the number on the pack. Thread count is a real measurement. It has also become the easiest number in bedding to inflate.

This article covers four things. How the weave is built, what a real construction looks like, how the thread count gets multiplied, and what the label may legally say.

It ends with eight lines for an order sheet.

Studio still life on beige of folded white percale sheets with a crisp edge and a plain matte surface
Percale reads as matte in the hand. The sheen belongs to another weave.

The Short Answer

Percale is a plain weave. Each warp thread passes over one weft thread and under the next, and the pattern repeats across the whole cloth.

That structure gives a flat, matte surface with a dry hand. It wrinkles, it holds a crease, and it feels cool at first touch.

A hotel linen supplier puts it in one line on its weave page. Cotton percale is a plain weave, “woven using a one-over, one-under weaving pattern”, and the finer qualities are “crisp yet soft, with a matte finish”.

Sateen is the other weave buyers compare it with, and it is built the opposite way. Four threads float over one before tucking under, so the face carries more thread surface.

That float is why sateen shines. It is also why percale breathes better, which the next sections show.

What The Weave Actually Is

Two sets of threads cross at right angles. The lengthwise set is the warp, called ends. The crosswise set is the weft, called picks.

In a plain weave the interlacing happens at every single crossing. In a sateen the interlacing is rare, and long stretches of thread lie loose on the face.

Count the crossings in a square inch and you have the thread count. Ends plus picks, nothing more.

Two consequences follow, and both matter to a buyer.

More crossings mean more crimp. Each thread bends over its neighbour, so the cloth is tighter and firmer at the same yarn size.

More crossings also mean more contact points for a fibre to work loose, which is why percale can pill if the yarn is weak.

The sateen float has the opposite problem. A long loose thread catches on a ring or a zip, and a snag pulls a whole float.

Now put the two weaves side by side, because that is the choice most buyers actually face.

PropertyPercaleSateen
Weaveone over, one underfour over, one under
Surfacematte, flatlustrous, smooth
Handcrisp and drysilky and fluid
Air and heatpasses air, feels coolholds more warmth
Wear riskpilling on weak yarnsnagging on a float
Fitshot sleepers, hotels, summercool sleepers, year round

None of this makes one weave better. It makes them different tools, and the buyer picks the tool for the market.

Diagram comparing a plain weave with one over one under against a sateen weave with four threads floating over one
Same two thread sets, two crossing patterns. The float on the right makes the sheen.

One more cost note before the numbers, because it drives the quote.

A plain weave needs more picks per centimetre to reach a given weight. More picks means slower loom time and more yarn.

So a percale at the same weight as a sateen often costs more to weave, not less. The sateen saves loom time and spends yarn on the float instead.

That is why a “cheaper weave” is not a thing a mill will agree with. The right question is which construction meets the brief.

The Thread Count Trick

Thread count is ends plus picks per square inch. That is the whole definition, and it is why the number can be checked.

The trick starts with ply. A yarn can be a single strand, or two or three strands twisted together.

Take a cloth with 150 threads per inch, woven from two-ply yarn. Count the strands instead of the threads and you get 300.

Nothing in that cloth changed. Only the counting method did, and the pack now says 300.

Three-ply takes the same cloth to 450. This is not a fringe practice, and it is not always dishonest, because some mills define the number that way.

It becomes dishonest when a 300 count two-ply cloth is compared with a 300 count single-ply cloth. The second one is a different product, and usually a better one.

So the first question on any bedding quote is not the count. It is the count in single-ply terms.

Single-ply count = ends + picks per inch. Ask for the two numbers separately and the sum checks itself.

A cloth sold at 300 as two-ply 150 becomes 150 in this arithmetic. The buyer sees the difference in one line.

What One Real Spec Looks Like

Here is a live listing from a Nantong mill, and it is worth reading as a template.

The attribute table declares 100 % cotton, 40×40, 133×100, 233tc, and a weight of 134 GSM, woven plain.

Read the numbers in order. Warp yarn is 40 Ne, weft yarn is 40 Ne. Ends are 133 per inch, picks are 100 per inch.

Then add. 133 plus 100 is 233, which is exactly the count the listing prints, so this mill is counting single threads.

That is a clean spec, and it is rare enough to be worth praising. You can recalculate it, and you can ask a second mill for the same three numbers.

The rest of the row is the commercial half. Width 150 to 320 cm, HS code 5208290090, minimum 1,000 metres.

Price runs US$2.49 per metre at 1,000 to 4,999 m, and US$2.27 at 5,000 m and above.

A sample costs US$10 per metre and ships in three to seven working days. Bulk delivery is 30 to 55 days.

That listing also states 600 air-jet looms and two million metres a month, which tells you the scale behind a US$2.27 price.

Two cautions on the numbers, and both matter.

First, 134 gsm is a light cloth. It suits a crisp summer sheet and a hot market, and it will feel thin in a cold one.

Second, 40s yarn is a workhorse count, not a fine one. Fine percale runs 60s, 80s or higher, and the price moves with it.

Neither point is a fault. They are the two levers a buyer sets before asking for a price.

Why Percale Sleeps Cool

The cool feeling is structural, and it has three causes that a buyer can reason about without a lab.

The first is air. A plain weave has a short float and a tight interlacing, so the cloth is thin and flat, and air crosses it easily.

The second is contact. A matte, flat surface touches less skin than a lustrous float, and less contact means less trapped heat.

The third is weight. A percale at 134 gsm simply has less mass to hold warmth than a heavy sateen at the same yarn size.

That is why hotel programmes buy it for warm cities and for summer. The same logic sells it to a hot-sleeper market.

Where the reasoning stops is the exact breathability figure. Air permeability is measured in a lab, and no test was run for this article.

So do not print a number you have not tested. Ask the mill for the air permeability report if the claim carries weight in your market.

Panel showing thread count arithmetic of 133 ends plus 100 picks equals 233, beside a weight of 134 grams per square metre
One line from a real listing. Add the two counts and the printed number explains itself.

The Label Rule That Names The Fibre

In the European Union, a textile label speaks in fibre names, and the list of names is closed.

Regulation (EU) No 1007/2011 sets out those names and the rules for stating composition. A weave word is not one of them.

Article 7 goes further, and it is the part buyers quote. Only a product made of one fibre may be labelled “100 %”, “pure” or “all”.

So “100 % cotton percale” is a clean claim, because cotton is the fibre and percale is the weave. “Pure percale” is not a claim the regulation supports.

The same regulation treats a false composition statement as a misleading practice, and recital 19 links that to consumer law.

The regulation itself is free to read, and it takes about ten minutes to find the article you need.

For a buyer the practical test is simple. Read the label out loud and ask whether every word is either a fibre, a percentage or a care symbol.

Anything else is description. Description is allowed, and it must not contradict the composition.

Eight Lines For The Specification

A weave name on a photo is not a specification. These eight lines turn it into one.

1. Construction. Warp and weft yarn count, ends per inch and picks per inch. Write 40×40 133×100, not “percale”.

2. Ply. State single-ply, and state the count on that basis. This one line removes the whole multiplication argument.

3. Weight. Grams per square metre, with a tolerance. It sits next to the count and catches a thin substitute.

4. Fibre. Composition with percentages, and the fibre name from the legal list. Keep combed and carded apart.

5. Width and shrinkage. Usable width, plus the residual shrinkage after the stated wash. Ask for the test method.

6. Performance. Colour fastness, pilling and dimensional change, each with the method named and a pass figure.

7. Finishing. Whether the cloth is pre-shrunk, mercerised, or soft-washed. Each changes the hand and the price.

8. Documents. Fibre content label per market, care label, and the invoice description that matches the HS code.

Line on the orderWhat you must seeThe trick it blocks
Construction40×40 133×100“percale” with no numbers
Plysingle ply, stateda count doubled by twisting yarn
Weight134 gsm, with a tolerancea thinner cloth at the same count
Fibre100 % cotton, combedcarded sold as combed
Shrinkageresidual, after the stated washgreige figures passed off as finished

The commercial half of a quote has six lines of its own. Here is what the listing above states, and what to ask for in its place.

ItemThe listing I readWhat to ask your mill
Base priceUS$2.49 per metre, 1,000 to 4,999 mprice at your real quantity
Volume priceUS$2.27 per metre from 5,000 mwhere the next break sits
Minimum1,000 metreswhether a smaller run carries a premium
SampleUS$10 per metre, 3 to 7 dayswhether the sample cost is credited
Lead time30 to 55 daysthe date they will put in writing
Payment30 % deposit, T/Tbalance against documents

A quote without those six lines is a headline. It is not an offer you can compare.

The specification sheet that holds these eight lines is worth building once and reusing on every bedding programme.

Then check the roll, not just the swatch. A pre-shipment check on woven cloth should count threads, weigh a square metre and look for a shift in shade across the roll.

Bedding sets add one more step, because the carton carries the claim. The pack copy and the carton spec should be agreed before the print run, not after.

Where Percale Fits, And Where It Fails

Percale earns its place in four kinds of programme.

It fits hot markets and summer ranges, where a cool, dry hand sells. It fits hotel and hospitality linen, where a crisp finish reads as clean.

It fits a brand that wants a plain, matte look without a sheen. And it fits a price point where a 40s, 134 gsm cloth is enough.

It fails in three places, and the factory will not always say so.

A percale sheet wrinkles, and it holds the crease. A market that expects a smooth bed will complain unless the cloth is pressed or blended.

Cotton percale also shrinks unless the mill pre-shrinks it. Ask for the residual shrinkage on the finished piece, not on the greige roll.

And it can pill, because a plain weave has many contact points. Weak yarn makes that worse, so the yarn count and the combing matter more than the count on the pack.

The home and daily category holds the rest of the bedding and table linen files, if you want the neighbouring specs.

SPEC CHECK

Send me one bedding quote and I will read the construction line, the ply and the weight against the price. If the count is built on two-ply yarn, I will say so in one sentence, and tell you what to ask for instead.

Check My Quote

Questions Buyers Ask

Is percale cotton or polyester?

Either. Percale is a weave, so the fibre is a separate question. Read the composition line, then read the weave.

Is a higher thread count always better?

No. Above a point the cloth gets dense and stiff, and a plied count inflates the number without adding threads. Compare single-ply counts only.

Why is percale more expensive than sateen at the same weight?

A plain weave needs more picks and more loom time to reach that weight. The sateen spends its yarn on floats instead of crossings.

Does percale soften with washing?

Yes, cotton percale relaxes over the first few washes and loses some of its crisp finish. Pre-washed cloth skips part of that change.

Is 200 thread count enough for a hotel?

It can be, when the yarn is fine and the cloth is well finished. A 200 count single-ply combed cotton beats a 300 count two-ply.

Can I call a polycotton blend percale?

The weave word still applies if the cloth is a plain weave. The label still has to give the fibre percentages, and it cannot say pure cotton.

Questions & Comments

We read every one and reply within 24 hours

If a bedding quote lands on your desk, send it over. I will read the construction line first, then the ply, then the weight, and tell you which of the three the price is actually paying for.

Subscribe
Notify of
guest
0 Comments
Most Voted
Newest Oldest
0
Would love your thoughts, please comment.x
()
x