What Is PEVA? One Copolymer, Two Names, One Number
Home
Yiwu, Zhejiang, China
Mon – Fri 9:00 AM – 6:00 PM · Sat 9:00 AM – 4:00 PM
[email protected]

What Is PEVA? One Plastic, Two Names And One Number

Alan Xiao, Founder of Sourcing Pioneer
Alan Xiao Founder of Sourcing Pioneer
· Updated November 11, 2026 · 11 min read

PEVA is a plastic film. The name hides a simpler fact than the label suggests.

The letters stand for polyethylene vinyl acetate. Most suppliers sell the same polymer as EVA.

So the choice in front of a buyer is rarely “PEVA or EVA”. It is a choice of vinyl acetate content, thickness and add-ins.

This page covers those three, then the rules that apply and the lines a material statement has to carry.

Studio still life on a warm beige surface with a roll of clear PEVA film, a folded translucent shower liner and a printed film swatch
One polymer, sold under two names and a dozen thickness labels.

The Short Answer

PEVA is the short name for polyethylene vinyl acetate, a copolymer of ethylene and vinyl acetate. It contains no chlorine.

The same material is sold as EVA. A reference source lists PEVA as another name for EVA, not as a rival product.

The ratio of the two building blocks is the number that matters. Vinyl acetate (VA) content runs from about 1 to 40 percent by weight, and the rest is ethylene.

That ratio sets the softness, the clarity and the feel. Below roughly 4 percent, the grade is sold as vinyl-acetate modified polyethylene rather than as EVA.

On a retail page the name usually describes the form, not the chemistry. Film for a shower liner and foam for a mat can carry the same family name.

That is the first place a buyer gets misled. It costs real money when two quotes are compared as if they were two materials.

Why The Trade Uses Two Names

Ask three suppliers what the difference is and you will get three answers. One film plant states that PEVA generally means polyethylene vinyl acetate while EVA means ethylene vinyl acetate.

Read those two phrases again. They describe the same polymer, written in the other order.

The trade still uses the split, because the two words arrived through other product routes. Film extruders in China built PEVA around shower liners, tablecloths, aprons and garment bags.

Foam converters built EVA around mats, soles and padding. Two supply chains, two vocabularies, one polymer family.

Diagram showing one ethylene vinyl acetate resin feeding film extrusion sold as PEVA and foam conversion sold as EVA
Two factory routes leave the same resin and pick up two other words.

What really differs between two rolls is measurable, and none of it is hidden in the name. It sits in four numbers.

The first is vinyl acetate content. The second is thickness. The third is density, which decides how much a square metre weighs. The fourth is the additive package.

A quote that names the polymer but none of those four numbers cannot be compared with another quote. It is a price for a word.

What An 8G Liner Really Measures

Retail listings for shower liners use gauge, written as 4G, 5G, 8G or 10G. The figure is not mm and it is not mils.

One vendor states the mapping plainly. Eight gauge is about 0.08 mm, so one unit of gauge equals 0.01 mm. The usable range runs from about 3 to 10.

The mix-up is easy to explain. In the United States, a mil is one thousandth of an inch, which is 0.0254 mm.

An 8G sheet is 0.08 mm thick. That converts to about 3.1 mil, not 8 mil. A buyer who reads “8G” as “8 mil” expects a thicker sheet. The roll that arrives is about two and a half times thinner.

LabelSizeIn milHand
3G0.03 mm1.2Thin, creases at once, short life
5G0.05 mm2.0Budget liner, tears at the eyelets
8G0.08 mm3.1The usual retail liner
10G0.10 mm3.9Heavier drape, better at the grommets
0.20 mm sheet0.20 mm7.9Sold in mm, not gauge
Diagram mapping shower liner gauge labels from 3G to 10G against mm and mil, with a note that 8G is about 3.1 mil
Gauge, mm and mil on one scale, because orders arrive in all three.

Note the last row. Above about 10 gauge, suppliers stop using gauge and quote mm. So the same order can arrive with two labels on the paperwork.

Weight follows thickness, and that is the number to put beside the gauge. A film weighs its thickness in mm, times density, times one thousand. That gives grams per square metre.

Use the density your vendor states. As an example only, 0.08 mm at a density of 0.93 gives about 74 grams per square metre.

Ask for both figures in writing. Gauge alone cannot be checked at goods-in, and a micrometer reading of a soft film is easy to argue about.

Agree the measuring method before the first lot arrives. Five readings across the sheet, taken away from the hem, gives an average and a low point.

Write both into the report. A single reading at the edge will read thin, because the film has been gripped there. One number like that starts an argument about the whole roll.

Three Materials, One Question

Most sourcing conversations about PEVA are really about PVC. The third material, EVA, is usually the same polymer as the first.

The useful question is not which name is safer. It is what each sheet is made of, and what has to be added to it to make it flexible.

Polyvinyl chloride, or PVC, is a rigid polymer on its own. A flexible vinyl sheet gets its softness from a plasticizer, or softener, added to the resin.

PEVA and EVA do not need that step. Their softness comes from the ratio of vinyl acetate to ethylene, which is set when the resin is made.

That is why the PVC-free claim exists. It is a real difference, not a slogan. It removes one class of additive from the sheet.

QuestionPEVA / EVAFlexible PVC
Chlorine in the base polymerNoneAbout 57 percent by mass
Softener neededNo, softness comes from the VA ratioYes, added to the resin
Hand and drapeSlightly plastic, holds creasesHeavier, smoother, glossier
Odour out of the bagLower, but additive-dependentStronger, especially after months sealed
Where it fails firstGrommet tear, crease lines, yellowingsoftener loss, hardening, cracking
Typical useLiner, tablecloth, apron, garment bagHeavier liners, outdoor covers, upholstery

The chlorine figure is arithmetic, not opinion. A PVC repeat unit is two carbons, three hydrogens and one chlorine, which weighs 62.50 grams per mole.

The chlorine in it weighs 35.45. Divide one by the other and about 57 percent of the polymer mass is chlorine.

That number explains why PVC behaves differently in a fire and why the disposal argument exists. It does not, on its own, make a PEVA sheet safe.

The Chlorine Claim, Read Carefully

Chlorine-free is a statement about one element. It says nothing about the softener, the ink, the fragrance or the anti-mould additive.

A film plant makes this point itself, between its own marketing lines. It notes that lower odour does not prove complete safety. Add-ins and inks matter too.

So a PEVA liner can still carry a fragrance that bothers a customer. It can also carry a print that uses a solvent nobody asked about.

The odour complaint is the one that reaches a seller first. A curtain sealed in a poly bag for months will smell of whatever went into it, whatever the base polymer.

The practical test costs nothing. Open a sample, leave it in a ventilated room, and smell it at 24 and 72 hours. Ask for an unfragranced version of the same film.

Where children are involved, the written limit is sharper. In the United States, a children’s toy may not contain more than 0.1 percent of eight named phthalates. The same limit covers child-care articles.

That list runs DEHP, DBP, BBP, DINP, DIBP, DPENP, DHEXP and DCHP, under the phthalate rule for children’s articles. A PEVA sheet starts ahead here, because it has no plasticizer to lose.

Starting ahead is not the same as passing. A softener can arrive in a print paste, an adhesive or a hem tape. The test is run on the finished item.

In the European Union the same four substances, DEHP, DBP, BBP and DIBP, sit in REACH Annex XVII. The restricted substances index shows the entries, and the numeric condition sits inside each entry.

Read the entry, not the summary. A test report that cites the regulation without the entry number is hard to check against a shipment.

What The Rules Ask For

For a shower liner the rules are light, because the liner never touches food. For a tablecloth, a lunch bag or a storage pouch, they are not.

EVA polymers are permitted for food contact in the United States, with conditions. The section for EVA polymers sets the limits a factory can be held to.

The main limit is extraction. Net chloroform-soluble extractives must stay at or below 0.5 milligrams per square inch. The solvent and the conditions follow the food type.

Grades grafted with maleic anhydride carry their own numbers. VA groups at or below 11 percent. Grafted maleic anhydride at or below 2 percent. The melt flow index sits at or below 2.1 grams per 10 minutes.

Radiation is addressed too, because film is often treated to kill microbes. Electron beam up to 3 million electron volts, with a total absorbed dose at or below 150 kilogray.

An irradiated film has a second extraction limit. That test runs in n-heptane at 75 degrees Fahrenheit for 30 minutes. Total extractives must stay at or below 4.5 percent by weight of the film.

Four numbers, then: 0.5, 11, 2.1 and 4.5. A vendor who says “FDA approved” without a report is describing a family of resins, not the roll in the carton.

Read the report for three things before the numbers. The sample it names, the condition it ran, and the form it tested.

A report on the resin does not cover the finished sheet. A report on an unprinted sheet does not cover the printed one. The article is what reaches the customer.

When It Counts As Food Contact

The same film can be a bathroom liner or a food-contact article. What changes is the use, not the polymer.

A PEVA cloth that a hot plate sits on is in contact with food. So is a lunch bag holding a sandwich, or a pouch for dry goods.

That single question decides whether the extraction tests above are part of the order, and whether the price includes them.

It also decides which statement you need. Which papers a food-contact claim needs is a separate set from the one a bathroom buyer keeps.

Materials differ in how they are tested, and the reports are not interchangeable. Why silicone is tested differently is worth reading before you compare two certificates side by side.

What The Sheet Should Say

A material statement is not a certificate. It is the plant’s written description of what the roll contains. It should name numbers rather than adjectives.

Six lines cover what a buyer really needs. Each one can be checked against a sample without a laboratory. Each one closes an argument that would otherwise arrive at goods-in.

LineWhat to demandWhat it settles
Base resinEVA, with vinyl acetate content in percentWhether two quotes cover the same polymer
Thicknessmm, plus the gauge it maps to, plus toleranceStops the 8G read as 8 mil
WeightGrams per square metre, and the density usedMakes freight and cost per piece comparable
Add-insSoftener, fragrance, anti-mould agent, UV stabiliser: present or absentWhere the odour and the phthalate question live
Print and coatingInk type, solvent, coverage, whether testedKeeps the print out of the “base material” claim
Food contactYes or no, with the test and the report number if yesDecides the extraction tests and the price

Where The Money Leaks

Thickness is weight, and weight is freight. That chain is where a cheap quote turns expensive after the carton is closed.

Take a liner 72 inches square, which is about 3.35 square metres. At 74 grams per square metre it weighs roughly 250 grams.

Ten thousand pieces is then about 2.5 tonnes of film before any carton, hook or header card. A lighter gauge saves material and shows up as a smaller freight bill.

It also shows up as a shorter life. One curtain plant puts PEVA liner life at months to about a year. Creasing, grommet tears and mildew in the folds end it sooner.

The grommet is the weak point. A thin sheet concentrates the load at each eyelet, so a reinforced header costs less than the returns it prevents.

The second leak is the claim. A “PVC-free and non-toxic” line invites a customer to ask which test proved the second half of it.

The third is the order size. Small trial runs are normal before a colour-based minimum. A standard production window of about 25 to 30 days starts after the sample is approved.

Plan the ship date from that approval, not from the day the order was placed. The inspection that catches a thin lot still needs a week at the end of it.

Fire performance belongs on the list for hospitality work. One curtain plant reports that hotel projects ask for a rating such as NFPA 701. That is a project requirement, not a rule for a household liner.

Write all of it into one page. A spec sheet the factory signs is what turns six statement lines into something you can hold a supplier to.

FILM DECLARATION

Send me the spec you have been given for a PEVA or EVA film. I will check whether the gauge, the grams per square metre and the add-ins agree, whether food contact is claimed, and whether the test report covers the printed area. No cost, no obligation.

Check My Spec

Questions Buyers Ask

What does PEVA stand for?

Poly(EVA): a polymer of ethylene and vinyl acetate. The same polymer is sold as EVA, so the two names describe one material family.

Is PEVA other from EVA?

Chemically, no. A reference source lists PEVA as another name for EVA. In trade use the words track other supply chains, film versus foam, and sometimes other vinyl acetate levels.

Is PEVA safer than PVC?

It removes chlorine and the softener from the sheet, which is a real difference. It does not remove inks, fragrance or anti-mould add-ins, so the finished article still needs testing.

What does 8G mean on a shower liner?

About 0.08 mm. One unit of gauge equals 0.01 mm, so 8G is roughly 3.1 mil, not 8 mil. Above about 10 gauge, suppliers quote mm instead.

Can PEVA be used for food?

Yes, and the polymer is permitted for food contact with extraction limits. Whether your order needs those tests depends on the use: a bathroom liner does not, a tablecloth or lunch bag does.

How long does a PEVA liner last?

One curtain factory puts it at a few months to about a year before creases, eyelet tears or mildew in the folds. Gauge, header strength and ventilation move that range more than the polymer name.

Questions & Comments

We read every one and reply within 24 hours

Got a PEVA spec that lists a gauge but no grammage? Send the two lines and I will say which one your factory is measuring.

Subscribe
Notify of
guest
0 Comments
Most Voted
Newest Oldest
0
Would love your thoughts, please comment.x
()
x