TWS Earbuds: Relayed Or Dual Stream, And Why It Shows
Home
Yiwu, Zhejiang, China
Mon – Fri 9:00 AM – 6:00 PM · Sat 9:00 AM – 4:00 PM
[email protected]

What Is TWS Earbuds: Two Radios And A Problem

Alan Xiao, Founder of Sourcing Pioneer
Alan Xiao Founder of Sourcing Pioneer
· Updated November 11, 2026 · 10 min read

TWS means true wireless stereo. Two earbuds, no wire between them.

That is the product. The interesting part is the problem underneath it, because a phone has to feed two devices that cannot hear each other.

There are two ways to solve it. The difference shows up in battery life, in which ear stutters in your pocket, and in how a video looks on screen.

This article separates the two arrangements, then turns both into questions a buyer can put on a specification sheet.

Studio still life of a pair of true wireless earbuds beside their open charging case on a beige surface
The case carries most of the battery. The buds carry the argument.

The Short Answer

TWS is a marketing name, not a standard. There is no specification that defines it, and no body that certifies a product as TWS.

What the name describes is a radio arrangement. Two earbuds each carry a Bluetooth link, and something has to feed both of them with the same audio in step.

The Bluetooth SIG is direct about the history. Its own account of LE Audio says the work was partly driven by the need to catch up with proprietary extensions. It names true wireless stereo as the example.

So the arrangement was invented by manufacturers, sold under a badge, and only later folded into a standard. That is why two products with the same four letters behave differently.

The split is simple to state. Either one bud receives and passes audio to the other, or both receive their own stream.

One Radio, Two Hops

The older arrangement uses one link to the phone. The bud that wins the connection is usually called the primary, and the other is the secondary.

Audio travels from the phone to the primary, and the primary forwards it to the secondary over a second, shorter link. That second hop is the whole story.

It costs time first. The secondary hears whatever the primary relayed, so its audio arrives later than the audio in the primary ear.

It costs power second. The primary runs two radios, so its battery drains faster, and the two buds in the case are not the same product after a year.

It costs behaviour third. Put the primary back in the case and the roles have to move. A good implementation hands over cleanly, and a poor one drops the music for a second.

Diagram comparing a relayed topology, where one earbud forwards audio to the other, with a dual-stream topology where both receive their own stream
Everything that follows, from battery to drop-outs, comes from that second link.

Those three symptoms are what users report without knowing the cause. One bud dies first. The left one cuts out in a pocket. Taking the other bud out stops the music.

None of them is a fault. All three follow from a single radio doing double duty.

Two Radios, One Group

The newer arrangement gives each bud its own stream from the source. Nothing is forwarded, so the second hop disappears.

This is what LE Audio standardised, and the mechanism is worth knowing because it explains where a product’s support really comes from.

LE Audio runs on the low-energy radio rather than the older audio radio. It arrived with Bluetooth 5.2, and it brought a new codec with it.

The stream is called a connected isochronous stream: a two-way, timed link between one source and one sink. Group several of them into one isochronous group and the two buds receive in step.

That grouping is the technical answer to the whole problem. Each bud has its own link, and the timing that keeps them together is managed by the source.

The codec matters too. LC3 replaced the older baseline codec. The SIG’s own comparison puts the old one at 248 and 192 kbps, against a new one running from 248 down to 64 kbps.

A Fraunhofer institute that helped test it states the result plainly. The new codec beats the old one on quality even at half the bit rate.

Half the bit rate is not a marketing figure. It is the reason a small bud can run a radio, a decoder and an amplifier on a battery the size of a pea.

Broadcast is a different trick, and worth separating. A broadcast stream goes one way, to an unlimited number of receivers, with no pairing at all.

Several of those streams form a group. A venue encrypts the group with a code, so a listener in the next room cannot join it by accident.

None of that changes the arrangement inside a pair. A product can support broadcast and still relay between its own two halves.

What Is Actually In The Box

A TWS bud is a radio, a decoder, an amplifier, a speaker, a microphone, a battery and an antenna. All of it sits in a shell the size of a bean.

The radio is part of a single chip that also runs the codec and the product’s own logic. Which chip is chosen decides most of what the product can do.

The chip decides the arrangement too. A part with one audio link will relay. A part built for the newer standard can hold its own stream, if the phone cooperates.

Then there is the antenna. This is where small products fail. Two buds sit inches apart, and a head sits between them and the phone.

A human body absorbs the 2.4 GHz band well. That is why the bud in the far ear from a front pocket is the one that stutters. It is also why the pocket test tells you more than a specification.

Battery is the next honest number. Most of the capacity is in the case, so a bud quoted at eight hours is usually a bud plus a case quoted together.

Ask for the two figures separately. Bud hours and total hours with the case are different promises, and only one of them survives a long flight.

Last are the parts users touch. The charging contacts corrode, the in-ear sensor decides when play starts, and the microphones decide whether a call works on a street.

None of those is a radio feature. All of them show up in returns.

The Latency That Shows On Video

Wireless audio arrives late. The question is how late, and whether the two ears agree.

Broadcast has had an answer for years. The reference for sound against picture is a recommendation from the ITU, and the European Broadcasting Union’s quality item applies it as a plain tolerance.

That item defines the check as audio and video being within the required user tolerance. It gives 100 milliseconds as an example figure, measured over a segment of at least five seconds.

That is the yardstick. A product whose audio lags the picture by more than a tenth of a second is outside the tolerance broadcasters work to.

Now add the second hop. In a relayed pair, one ear is late by the codec and the radio, and the other is late by that plus the forwarded link.

The two ears then disagree with each other. That disagreement is heard as a smear on speech transients, and users describe it as one bud sounding behind the other.

Diagram of the delay chain from source to each ear, showing the two ears landing at different times in a relayed pair and together in a dual-stream pair
The difference between the ears is what a relayed pair adds.

A dual-stream pair removes that second hop, so both ears land together. Total delay still exists, and a low-latency mode can shorten it further.

What matters for a buyer is which delay the product pages are quoting. A single figure hides the ear-to-ear difference. That difference is the one users notice.

Video is the easy case, because the picture is already fixed. A game is harder, because the delay now sits between a thumb and a sound.

A player notices that loop long before they notice lip sync. That is why a low-latency mode exists, and why it usually costs something: a shorter buffer trades drop-out cover for speed.

Backwards compatibility is the quiet cost. A pair built for the newer arrangement still has to carry the older codec, because most phones in the field speak only the old one.

Two codecs mean more flash, more work for the chip and a longer firmware list. It is also why the same shell can be sold as two products at two prices.

Which Arrangement Am I Buying

Six questions separate the arrangements, and five of them are about behaviour rather than features.

BehaviourRelayed pairDual stream
How audio arrivesOne link, then a forwardOne link per bud
What the phone must supportNothing beyond the codecThe newer audio standard
Battery between budsUneven, primary drains firstClose to even
Removing one budRoles have to moveOther bud keeps its link
Delay between earsOne ear is a hop lateBoth land together
Cost of the designLower, older siliconHigher, and needs a codec licence

A product can also do both. Some chips relay on one phone and stream separately on another, and the behaviour then depends on what the buyer’s phone can do.

That is the most common real answer, and the least common one on a specification sheet.

What The Box Says

Most of the confusion is a number that answers a different question than the one the buyer asked.

What it saysWhat it answersWhat to ask instead
“TWS 5.3”The version of the radioWhich audio arrangement, and does it change by phone?
“Low latency 60 ms”One figure, one earWhat is the delay between the two ears?
“Dual connection”Two devices rememberedHow many play audio at once?
“Hi-Res audio”A codec can carry itWhich codec, and who licensed the decoder?
“ANC 40 dB”One depth, at one frequencyShow the attenuation curve.
“8 hours playback”The bud alone, at low volumeBud hours and case hours, separately.

None of those lines is false. Each one is true about something slightly different from the product being bought.

Eight Lines For The Sheet

A supplier who can answer all eight has built the product twice. A supplier who answers four has a sample.

One. Which audio arrangement, and does it fall back to relay when the phone cannot stream twice?

Two. The chip, by part number. That single line settles most of the argument.

Three. The codecs supported, and which of them need a licensed decoder. The high-bitrate codecs are the licensed ones, and a licence is a lead time.

Four. Whether the newer audio standard is supported at both ends, and which phones were used to test it.

Five. Bud hours and case hours, as two numbers under the same test conditions.

Six. The tested radio range, and what happens with the phone in a front pocket and the body turned away.

Seven. The delay, quoted twice: source to ear, and ear to ear. The second number is the one that gets returned.

Eight. The water and dust rating plus the plating on the charging contacts, since sweat destroys both.

Those eight belong in the file. The written sheet the order is built on is what makes a radio arrangement a testable item instead of a badge.

One more line sits underneath all of them. The version of the radio the product runs sets what is possible before the chip choice is made.

Ten Minutes With A Sample

Five checks separate the arrangements, and none of them needs a lab.

Swap. Take the left bud out alone and play. Put it away, take the right one out. A relayed pair may take a second to move roles. A dual-stream pair does not care.

Pocket. Phone in a front trouser pocket, body turned away, one bud in. A relayed pair will stutter on the far side first.

Video. Play a clip of someone talking, close up. Watch the mouth. More than a tenth of a second of lag is visible, and it is the tolerance broadcasters work to.

Two ears. Play a mono recording of speech, then swap the buds left to right. If one side sounds smeared against the other, the ears are not landing together.

Case. Drop one bud into the case mid-song and pull it back out. Count how long the music is gone.

Week. Use them normally for a week, then read the two battery percentages. A gap that grows is the signature of a relay.

Ten minutes of that beats a page of claims, and it costs one sample.

RADIO CHECK

Send me the specification sheet for a pair of TWS earbuds you are considering. I will name the audio arrangement, check the chip and the codec licences, separate the bud hours from the case hours, and flag the delay figure that is missing. No cost, no obligation.

Check My Sheet

Questions Buyers Ask

Is TWS an official standard?

No. It is a trade name for a radio arrangement that manufacturers built first. The standard that covers it properly is LE Audio, and a product can support one without the other.

Why does one earbud always run out first?

Because it is doing two radios. In a relayed pair the primary receives and forwards, so it spends more energy and ages faster than the bud it is feeding.

Can I use either earbud on its own?

Usually yes, and the good designs let either bud take the primary role. Ask what happens when the primary is put away, because that handover is where cheap pairs fail.

Does LE Audio need new earbuds and a new phone?

Yes, both ends. The stream is a different link, so an older phone cannot feed a new pair that way, and a new phone cannot force an older pair to do it.

Is that the same as pairing two separate headphones?

No. Two paired headphones are two devices the phone knows about. A TWS pair is one device that keeps its two halves in step, which is a harder problem than pairing.

Do more expensive earbuds always stream to both?

Not always. The arrangement follows the chip and the phone as much as the price, and some costly pairs still relay. The part number answers it faster than the price does.

Questions & Comments

We read every one and reply within 24 hours

If a quotation says TWS, send it over. I will name the radio arrangement, separate the bud hours from the case hours, and ask for the delay between the ears.

Subscribe
Notify of
guest
0 Comments
Most Voted
Newest Oldest
0
Would love your thoughts, please comment.x
()
x