Prototype PCB Assembly: Why Five Boards Cost More Than Fifty
Five boards usually cost more each than fifty, and the reason is not greed. Most of the price sits in work that happens once, whatever the quantity. The spec sheet that fixes the once-only work is the first thing to write.
The Short Answer
Split the price into two piles before you compare anything. Work done once, and work done per board.
Set-up, programming, a stencil and a panel are done once. Parts, placement and test repeat.
At five boards, the first pile dominates. At five thousand, the second one does.
So a prototype quote is not expensive because the shop is charging more per board. It is expensive because you are paying for a whole job that only makes five boards.
Two Piles, and Why the Ratio Moves
A shop prices a job by adding the time it will lose to the material it will use. At low volume, the lost time is the larger number.
Programming the placement machine for a new board takes hours, and the machine is not earning during that time.
Loading feeders takes more hours, because every part type needs a slot and a check. A board with eighty part types takes longer to set than one with twenty.
None of that changes when the fifth board is finished. The work was done once.
So the per-board price falls as the quantity rises, and it falls fastest between the first order and the second.
Some shops help you see this by quoting two quantities at once. Five boards and fifty, on the same sheet.
That pairing is more useful than any discount. It shows the fixed pile as a number, and it shows what the next order would cost if nothing changed.
Set-Up: The Hours You Cannot See
Ask what the set-up charge covers. The answer separates a real quote from a number someone typed.
A proper answer names four things. Machine programming, feeder loading, a first board checked by a person, and the time to correct what the first board shows.
That last item is the one buyers object to and the one that saves the most money. A first board is where a wrong rotation or a missing part is found, before the rest of the batch repeats it.
Ask whether set-up is charged once or per run. A job split into two shipments pays twice, and that belongs in the plan before the order.
Ask, too, whether a repeat order with no changes pays set-up again. A shop that keeps the program and the feeder list can answer no, and that answer is worth more than a small discount.
The Stencil: One Sheet Per Side, Per Revision
A stencil is the thin sheet that puts paste on the pads. One is needed for each side of the board that carries parts.
The stencil is cut from a file. Change the file, even by one pad, and the old stencil no longer matches.
This is why a revision is not free. A new revision means a new sheet, and the sheet is a fixed cost that does not care about quantity.
Ask who owns the stencil and where it is kept. A shop that stores it for you can re-run the job without cutting a new one.
Ask what happens if it is damaged, too. A stored sheet with no owner on record is a cost that appears again at the worst moment.
The Panel: Where Small Orders Waste Material
A panel is the larger sheet the line handles, holding several boards plus the strips at the edges.
Those strips, called rails, are needed for the machine to hold the panel. They are thrown away after the boards are separated.
At high volume, a well designed panel wastes a few percent. At five boards, the rails can be a large share of the material you pay for.
Ask how many boards fit on a panel and what the panel costs. Then ask who designs it.
A panel designed for the shop’s convenience may hold fewer boards than it could. That is not a fault, but it is a cost, and the buyer usually pays it without knowing.
How the boards are separated belongs in the same question. A v-score cuts a groove and the boards snap apart, which is fast and leaves a rough edge. A router cuts them out, which is slower and cleaner.
On five boards the difference is small in money and large in handling. A rough edge on a board that must fit a case is a fit problem, so say which method the design can take.
For a prototype, one more option exists. Some shops run a small number of boards on a panel shared with another job, and the price reflects the shared material. Ask whether that is offered, and what is lost by using it.
Parts: The Reel Minimum Is the Real Bill
Parts are where the second pile is largest at prototype volume, and where the quote is least transparent.
Distributors sell most parts on a full reel. A board that needs fifty resistors may be quoted against a reel of thousands, and the reel is a fixed cost in disguise.
Small quantities can be bought as cut tape, which costs more per part and less in total. Ask which was used in the price.
Then ask who buys the parts. A shop that buys them carries the risk and charges for it. A buyer who supplies them keeps control and takes the risk.
For a prototype, control is usually worth more. The parts are the design, and a substituted part with the same value and a different maker can change how the board behaves.
A part on allocation is the other half of this. When a maker cannot supply, the distributor limits how many you may buy, and a small order waits.
Ask what the shop does in that case before it happens. A shop that calls you has a rule. A shop that substitutes quietly has a habit.
So the drawing should name the part, the maker and the tolerance. Where those parts are bought in Shenzhen explains why a substitution is easy to arrange and hard to spot.
The First Article on Five Boards
A first article is a board checked against the drawing before the rest run. On a batch of five, that is twenty percent of the order.
Buyers often skip it at this size, and this is the wrong place to save. A prototype exists to find faults, and the first article is the cheapest place to find them.
Ask for three things with it. A photo of every side at high magnification, the placement report, and a note of anything the shop changed.
That last item matters most. A shop that changed a part because it was out of stock, and did not say so, has changed your design without telling you.
A second pair of eyes on the first article is cheap at this stage, because the batch is small enough to inspect completely.
Test: What Makes Sense at Five Boards
Test has a fixed cost too, and at low volume it can exceed the boards it checks.
A bed of nails fixture is built for one board. It is the right answer for thousands and the wrong one for five.
A flying probe needs no fixture. Two or four moving probes touch the board and check the nets in turn, which suits small batches.
A functional test with a hand held harness is the cheapest option and proves the board works as a product. It catches less than a full net check.
Ask which one is included, and what it does not cover. At prototype stage, a test that proves the design works is enough. A test that proves the process is repeatable can wait for the production order.
The Eight Lines a Prototype Quote Needs
One unit price for five boards hides everything that matters. Eight lines pull it apart.
| Line | Pile | What it has to state |
|---|---|---|
| Set-up | Fixed | Program, feeders, first board check, and whether a repeat pays again |
| Stencil | Fixed | One per side, who owns it, where it is stored |
| Panel | Fixed | Boards per panel, rail waste, who designs it |
| Parts | Per board | Reel or cut tape, maker named, who buys them |
| Placement | Per board | Which side, and how many passes |
| Test | Mixed | Method, coverage, and any fixture cost |
| First article | Fixed | How many boards, and what evidence comes with them |
| Lead time | — | Split into parts waiting, set-up, and the run itself |
Two of these lines decide whether the second order is cheap. Set-up, if the program is kept, and the stencil, if it is stored.
The rest decide whether the first order is right. A price with the eight lines filled in can be checked against the sample, which a single number cannot.
Revisions: Why a Second Spin Costs Double
A change to the design costs more than the change itself. It costs the fixed pile again.
A new file means a new stencil, a new program and a new first article. The boards from the old file become spare parts.
So the cheapest thing a buyer can do at prototype stage is freeze the design properly before ordering five boards.
Three things belong in the freeze. The part list with makers named, the outline with every hole located, and the test points marked.
A change note should carry four things. What changed, why, which boards are affected, and what the change costs.
Without the fourth line, a revision looks free at the moment it is agreed and arrives as an invoice later.
Ask the shop to confirm the freeze in writing before the stencil is cut. That one line turns a conversation into a record.
Ask what a change costs as well. A shop that quotes a revision charge in advance is telling you it has done this before.
When to Move From Prototype to Production
Prototype pricing is not a discount problem. It is a different way of buying, and it stops being right at a point you can measure.
| Signal | Question to ask | What changes |
|---|---|---|
| The board works three times in a row | Has every fault been found and fixed? | The design freeze can hold |
| Parts are bought on reels | What is the annual quantity per part? | Reel pricing replaces cut tape |
| Set-up is paid again | Is the program and stencil kept? | Repeat orders should be cheaper |
| Testing is a harness | Is a fixture cheaper per board now? | A fixture starts to pay |
| The panel wastes rails | Can the panel be redesigned? | Material cost falls |
The clearest sign is the third line. If a repeat order still carries a full set-up charge, the shop is treating every order as a first one.
The Quick-Turn Cluster, and What It Sells
Prototype board work clusters in the same electronics belt as production work, and it sells speed above all.
Small shops specialise in short runs, because a big line cannot afford to stop for five boards.
That specialisation is real, and it comes with a trade. A shop built for speed has less time to check, so the first article matters more, not less.
A broker sits between the buyer and the workshop in many of these jobs, and that is not automatically bad. A broker with a route to ten small shops can find capacity in a week.
The cost is distance from the line. A broker cannot answer a question about a nozzle or a feeder, and on a five board job those answers are most of the value.
Ask two questions to see the layer. How many prototype jobs run per week, and who checks the first board.
A shop that answers with a number and a role is a shop with a routine. A shop that answers with a delivery date is selling the date only.
The clauses that keep a job with the shop that quoted it are worth adding at this size. A five board order moves easily between workshops.
The Rules Around a Prototype
Prototype quantity does not remove the rules. Two of them apply before the first board is shipped.
If the product goes to Europe, the substance limits apply to the finished article, and the declarations come from the part makers. The current text is Directive 2011/65/EU, and the copy on EUR-Lex shows a consolidated version dated 1 July 2026.
Ask for the declarations with the first article, not with the production order. A part that fails the limits fails in a prototype too.
The second rule is the import code. A bare board and a populated board are different goods in the tariff, and the rate follows the code the importer declares.
The official tariff schedule is the reference, and the broker names the code. Ask which code will be used before the goods move, because a prototype is still an import.
Questions Buyers Ask About Prototype Assembly
Why is the per-board price higher at low volume?
Because set-up, the stencil and the panel are paid once and spread over fewer boards. The work does not shrink with the quantity.
Should I supply the parts myself?
At prototype stage, usually yes. Control over the maker matters more than the handling charge, and a substitution changes the design quietly.
Do I need a test fixture for five boards?
No. A flying probe or a hand held functional test covers a small batch. A fixture starts to pay when the batch is large enough to carry its cost.
How many prototypes should I order?
Enough to test to destruction and still keep one working board. Five is a common number, and it is usually chosen for that reason.
What changes when I move to production?
The fixed pile is spread over more boards, parts move to reel pricing, and a fixture becomes worth building. The design should not change at that point.
Can I reuse the stencil for a revision?
Only if no pad moved. Any change to the paste layer means a new sheet, which is why a design freeze before the order is cheaper than a quick fix after.
The Bottom Line
Five boards cost more each because most of the price is work done once. Ask what is fixed, what repeats, and what a repeat order will not pay again.
Freeze the design, keep the stencil, name the parts, and check the first board. Then the move to production is a price change, not a rebuild.
Send the File
Send the board file, the quantity and the test you need. We will ask three shops to split the price into fixed and per board, then compare what each one charges again on a repeat order, and mark the lines that should disappear the second time.
Send the Gerbers
Questions & Comments
We read every one and reply within 24 hoursPaid a set-up charge twice for the same board? Send the two quotes. We will mark which lines were fixed, which repeated, and how much of the second one was avoidable.