Perfume Concentration: EDP, EDT and What They Cost
Home
Yiwu, Zhejiang, China
Mon – Fri 9:00 AM – 6:00 PM · Sat 9:00 AM – 4:00 PM
[email protected]

Perfume Concentration: What the Percentage Actually Costs

Alan Xiao, Founder of Sourcing Pioneer
Alan Xiao Founder, Sourcing Pioneer
· Updated October 30, 2026 · 11 min read

A perfume concentration is the share of fragrance oil in the liquid. The name on the box follows from that one number, and so does the cost of each bottle you fill.

Most pages describe concentration as a smell decision. A stronger concentration smells stronger, they say, lasts longer and costs more.

The part they leave out is what happens in the factory. A higher share of oil changes the mixing calendar, the alcohol bill, the filling line and the label. Those four changes are the ones a buyer has to price.

This page covers five names and their bands, and the cost arithmetic per bottle. It also covers the rest time after mixing, and the legal limit that stops you from simply adding more oil.

Studio still life on a flat cream surface showing three glass perfume bottles of different heights, a small beaker of amber oil and an ivory blotter card with a brass cap, lit softly from the left
Three strengths, three bottles, three prices per ml.

Five Names, Five Bands

Five words cover almost each bottle sold. Each one is a range, not a fixed figure, because two houses can use the same name for liquids that differ by a third.

Name on the boxOil share, common bandWhat the buyer notices
Parfum, or extrait20 to 30 percentSmallest bottle, highest price per ml
Eau de parfum, EDP15 to 20 percentThe default for most brands
Eau de toilette, EDT8 to 12 percentLighter, cheaper, sold in larger bottles
Eau de cologne, EDC3 to 5 percentFresh, short life, often a summer line
Splash, or body mist1 to 3 percentVolume product, low unit cost
Flat vector reference panel on a cream background with five equal columns headed PARFUM, EDP, EDT, EDC and SPLASH, each under a thin amber rule with the oil share band printed in uppercase beneath it
Five names, one axis. The rest of the page follows the axis.

These bands are conventional, not legal. No rule fixes what EDP means. A competitor can sell a 12 percent liquid as EDP, and the same liquid as EDT in a different bottle.

That freedom has a price. It lets you position a product, and it means the name on the box tells a buyer nothing they can check. Put the oil share in the brief instead, as a percentage with a tolerance.

Where the Money Goes

Fragrance oil is the most expensive thing in the bottle. Alcohol is cheap, water is cheaper, and the glass sits somewhere between.

So the concentration you choose is mostly a decision about how much oil you buy. The arithmetic is short, and it is the same for every supplier.

LineHow it is worked outWhat moves it
Fragrance oilFill volume × oil share × price per mlThe concentration, and the oil you chose
AlcoholFill volume × the rest of the liquidGrade and duty, not the concentration
Bottle and capPer unit from the mould you selectWeight, decoration, tooling
Atomiser and collarPer unit, ordered with the bottleCrimp or screw, metal or plastic
Filling and labourBatch size against line timeHow many batches, not how strong

Take a 50 ml bottle. At 10 percent oil it holds 5 ml of oil. At 20 percent it holds 10.

If that oil costs 200 US dollars a kilogram, which is about 20 cents a millilitre, the oil line goes from 1.00 to 2.00 dollars a bottle. Doubling the strength doubles that line and nothing else.

That 1.00 dollar is the whole cost argument. On a 50 ml bottle sold at 40 dollars it is noise. On a 100 ml bottle sold at 12 dollars it is most of your margin.

Which is why the splash and body mist band exists at all. It is not a different product. It is the same product at a concentration the price point can carry.

The oil price itself varies more than the concentration does. Two oils at the same strength can differ five times in cost. The choice of oil moves the bill further than the choice of band.

Maceration: the Calendar Change

Mixing oil into alcohol does not produce a finished perfume. It produces a cloudy, sharp liquid that needs to sit.

Factories call that rest rest, or maturation. The blend stands in a tank, often under controlled heat, for days or weeks before it is chilled, filtered and filled.

Higher concentration needs more rest. More oil means more of the heavy, resinous materials. Those take time to marry with the alcohol, and the batch needs longer to settle clear.

None of the four pages ranking for this topic mention rest at all. They describe the percentages and stop. But it is the first thing that changes your delivery date when you raise the strength.

Ask two questions at quoting stage. How many days of rest does this formula need before filling, and is that time inside the quoted lead time or outside it.

A plant that quotes four weeks for an EDP and six weeks for the same formula at parfum strength is telling you the truth. A plant that quotes four weeks for both is either skipping the rest or planning to ship a hazy bottle.

The visible failure is easy to spot. A juice that has not settled goes cloudy in the bottle, or throws a ring of sediment at the shoulder within weeks. Neither can be fixed after filling.

Alcohol, Water and the Haze

The rest of the bottle is alcohol, water and a small amount of fixative. That balance decides whether the liquid stays clear.

Perfume alcohol is ethanol, often sold at 95 to 96 percent and denatured so it cannot be drunk. The additive matters, because some leave a smell of their own that fights the oil.

Water is used sparingly. A little helps some oils dissolve and softens the opening. Too much, and the oil drops out of solution as the liquid cools.

That is the haze problem, and it is why the batch is chilled before filling. Chilling to a low temperature forces the waxes and heavy materials to separate, then filtering removes them while the liquid is still cold.

A higher concentration carries more of those heavy materials, so it needs a colder chill and often a finer filter. A supplier who skips this step ships bottles that look fine on the line and cloudy a month later.

The alcohol grade is also a shipping question. A perfume is a flammable liquid. It travels under other rules than a cream, and a high alcohol share is what puts it in that class.

When you compare quotes, compare the alcohol grade and the filtering step, not just the oil share. Two quotes at 18 percent can differ by a season of shelf life.

The Ceiling Nobody Mentions

Adding more oil sounds like a free upgrade in strength. It is not free, because two rules push back.

The first is a materials limit. Fragrance houses publish a maximum use level for each material, and that limit is expressed as a share of the finished product. Raise the oil share and every material in the formula rises with it.

A material that sat safely at 10 percent oil can break its limit at 20 percent, with no change to the formula itself. The fix is a reformulation, which is a new brief, a new sample and a new round of testing.

The second is the label. In the United States, what the US label has to declare is set out in 21 CFR part 701. That rule lets a fragrance be listed as fragrance, not by its parts.

The European Union works the other way. It follows the EU rule that adds allergen names to the list. Under it, certain substances have to be named on the label once they pass a set level.

So a stronger version of the same scent can need a longer ingredient list in Europe. That is a carton change, a label change, and a print run. It can cost more than the extra oil.

Both rules apply to the same bottle if you sell in both markets. The practical answer is to fix the concentration before the artwork, not after.

What It Does to the Bottle and the Fill

A thicker liquid sprays differently. That single fact links the concentration to the hardware, and the hardware is often quoted separately.

A pump works by forcing liquid through a small hole. A liquid with more oil is more viscous, so the same pump delivers less per stroke and a coarser spray.

The usual fix is a larger orifice or a higher-output pump. Both cost more than the standard part, and both have to be chosen before the bottle is ordered.

The same applies to the dip tube length and the collar. Those are the numbers in the bottle and atomiser side of this order, and they are set once tooling starts.

Fill volume is the other trap. A bottle sold as 50 ml has a usable capacity above that figure, and the difference is headspace for the pump and the liquid.

If you raise the oil share without changing the fill volume, nothing about the bottle changes. If you also raise the fill to keep the same oil weight, the headspace shrinks and leaks become more likely in transit.

That is why who does the filling matters as much as who makes the juice. A plant that fills its own liquid controls both numbers. A plant that only fills buys a liquid it did not design.

What to Put in the Brief

Eight lines cover a perfume brief. Each one is a number or a name, and each one has a cost attached.

FieldExample entryWhy it has to be written
Fill volume50 ml, tolerance plus or minus 1 mlSets the oil weight and the bottle size
Oil share18 percent, tolerance plus or minus 1The cost line and the strength claim
Oil referenceHouse code and lot from the fragrance supplierTwo lots of one name can smell different
Alcohol grade96 percent, denaturant namedThe denaturant can carry its own smell
Maceration21 days at controlled temperatureSits inside or outside the lead time
FiltrationChill to minus 5, filter at 1 micronDecides whether the juice stays clear
Bottle and pumpGlass weight, orifice size, crimp or screwViscosity has to match the orifice
MarketUS, EU, or bothDecides how long the ingredient list is

That table lives inside a specification sheet, the same document a factory prices from in any category. If you already use the sheet that carries every number for other products, add these eight fields to it and keep one document.

One field deserves a note. The oil reference is not the marketing name of a scent. It is the supplier’s code plus the lot number. A fragrance house can reformulate without renaming, and then the second lot will not match the first.

Five Questions Before You Approve a Sample

One: how many days of rest are inside this price? Ask for a number, then ask whether it is included in the lead time or billed as extra days.

Two: what tolerance is on the oil share? Plus or minus one point on 18 percent is invisible. Plus or minus three is a different product at the same label.

Three: which alcohol and which denaturant? If the answer is a grade with no denaturant named, the smell of the batch is not yet under control.

Four: what is the chill point and the filter grade? This is the answer that predicts whether the bottles will still be clear in month six.

Five: which market is the label for? Then check whether the ingredient list changes at your strength. If it does, the artwork is not finished.

The first sample is also the cheapest place to test the spray. Fill one bottle, use it for a week and count the strokes. A pump that needs eight strokes for one wearing is a return.

Two Lines the Quote Does Not Show

Two costs sit outside the price per bottle, and both are decided by the concentration.

The first is the oil minimum. A fragrance house sells by weight, and a compound is often made to order with its own smallest batch. That batch is a fixed cost you carry whether you fill 500 bottles or 5,000.

Which means a strong concentration can hide a minimum problem. Half the fill volume at double the strength is the same oil bill. That bill is spread over fewer bottles, and the oil minimum does not shrink with it.

The second is the route. A perfume is a flammable liquid, so it is restricted on air and it is priced as dangerous goods. That changes both the carrier list and the cost per kilogram.

This is the practical reason a first order is often 1,000 bottles and not 300. It is not the bottling line. It is the oil batch plus the freight classification. Both are covered in how the minimum is actually set and in why a flammable liquid changes the shipping plan.

Questions Buyers Ask About Perfume Concentration

What is perfume concentration?

The share of fragrance oil in the finished liquid, measured by volume. A 50 ml bottle at 20 percent holds 10 ml of oil. Every other number in the order follows from that share.

Is eau de parfum stronger than eau de toilette?

Usually yes. EDP sits around 15 to 20 percent oil and EDT around 8 to 12. The bands are conventions, not rules, so two brands can use the same word for liquids that differ by a third.

What percentage is parfum?

Commonly 20 to 30 percent, which is why parfum is sold in the smallest bottles. Above that the oil can stop dissolving cleanly in the alcohol, and the cost per bottle climbs fast.

Does a higher concentration last longer on skin?

Often, but not in a straight line. More oil gives more of the heavy base materials, and those last. It also slows the opening, so the first ten minutes can feel weaker than a lighter version.

How much oil is in a 50 ml bottle?

Five ml at 10 percent, nine at 18, ten at 20. At 200 dollars a kilogram the oil line runs from about 1.00 to 2.00 dollars a bottle, which is the whole cost difference.

Can I change the concentration after the sample?

You can, but it is a new sample. Changing the oil share changes the rest time, the spray performance and, in Europe, possibly the ingredient list on the carton. Fix it before artwork.

The Bottom Line

Concentration is a number you choose once and then live with, because it reaches into the cost sheet, the calendar, the pump and the label.

Choose it for the price point, then write the oil share and its tolerance into the brief. Ask for the maceration days and the chill point in the same message. Those two answers separate a supplier who fills perfume from one who understands it.

OIL SHARE

Send the Brief, Get the Cost

Send the fill volume, the oil share and the market you sell in. We will work out the oil cost per bottle, ask the plant how many days of rest it needs, and say whether the label has to change at that strength before you pay for artwork.

Send the Brief

Questions & Comments

We read every one and reply within 24 hours

Two cotton pique quotes that sit a third apart? Tell us the weight and the yarn count on each and we will say which line is carrying the gap.

Subscribe
Notify of
guest
0 Comments
Most Voted
Newest Oldest
0
Would love your thoughts, please comment.x
()
x