Knitwear Manufacturer: Gauge, Yarn and the Two Ways a Sweater Is Built
A knitwear manufacturer is not one kind of factory. A plant that knits panels to shape and links them is a different business from one that cuts sweaters out of knitted fabric. Both will quote your style, and the two quotes will not describe the same garment.
The Short Answer
Ask for the gauge before anything else. Gauge is the number of needles per inch on the machine. It sets how thick the fabric is, how long the panel takes and what the sweater costs.
Then ask one question that sorts the factories into two groups. Are the panels knitted to shape and linked, or knitted as fabric and cut? One answer means a knitwear plant. The other means a cut and sew plant that also knits.
Everything after that is detail: yarn lot, colour matching, the linking room, and what the wash does to the wool. Those four decide whether the second order looks like the first. On a stretch knit the same logic runs through the four fabric numbers behind activewear.
Two Ways a Sweater Is Built
Fully-fashioned knitting shapes each panel on the machine. The neck opening is knitted in, the armhole curve is knitted in, and the pieces arrive ready to join.
Joining is done by linking: a separate machine takes each loop and stitches it to the matching loop. The seam is flat, it stretches with the fabric, and it disappears into the knit.
Cut and sew starts from a length of knitted fabric. The panels are cut out with a blade, then joined on an overlock or a coverstitch. It is faster, and it wastes the fabric between the shapes.
The cut edge is the difference you can feel. A cut panel has raw loops along the seam and adds bulk under the arm. A shaped panel has none, because nothing was cut.
So a cut and sew quote is usually lower and a linked quote is usually better. Neither is wrong. What is wrong is accepting one and expecting the other.
Gauge Is the Spec That Sets the Price
Gauge is written as a number and GG, as in 7GG. A higher number means more needles per inch, a finer yarn and a smoother surface.
It is the first number on a knitwear quote because it changes everything downstream. Yarn count, knitting time, panel weight and the hand of the finished garment all follow from it.
A quote that says wool sweater and nothing else is not a quote. It describes a fibre and leaves out the structure, so two factories can both answer it and mean different products.
| Gauge | Fabric | Typical product | What it changes |
|---|---|---|---|
| 3 GG | Chunky, deep stitch | Heavy cardigans, chunky hats | Fastest to knit, most yarn, least machine time per panel |
| 5 GG | Mid heavy | Winter sweaters in wool blends | A common middle for warm knits |
| 7 GG | Mid weight | Crewnecks, polos, most programmes | The default gauge for volume knitwear |
| 12 GG | Fine and smooth | Merino and cashmere crewnecks | Slowest, least yarn, best drape and the cleanest surface |
A plant rarely runs every gauge. Three or four machines may cover 5GG to 12GG, and a 3GG order goes to whichever partner has the bed free. Ask which gauges are in house and which are subcontracted.
The answer is also a lead time answer. A gauge that leaves the building adds a week and a second party. The second party is also the one you cannot visit.
Yarn, and the Lot Problem
The second number on the quote is the yarn. Count, fibre and source all matter, and one of them creates the problem buyers meet on order two.
Yarn is dyed in lots. A lot is one batch through one dye vessel, and two lots of the same colour number will not match exactly. The mill blends what it can, and past a certain tolerance the shade moves.
So the first order is matched to a lot, and a lot is finite. Six months later the same colour name may come from a different lot. The new sweater will then sit a shade away from the old one.
Three things reduce the risk. Ask for the lot number on the invoice and keep a hank of the yarn. Choose a melange or a marl, where variation is part of the look. And buy enough yarn in one lot to cover two production runs.
Solid dark colours show a shade difference most clearly. Pale grey and oatmeal hide it. That is worth knowing before the range is designed, because it decides which colours you can repeat.
What a Sample Has to Prove
Knitwear sampling starts smaller than most buyers expect. The first deliverable is not a garment. It is a square of knitted fabric.
A swatch costs little and takes days. It shows the gauge, the stitch, the yarn and the hand, and it is the cheapest place to reject a combination that will not work.
Ask for two swatches in the same yarn at different gauges. Put them side by side and the price difference stops being abstract, because you can feel what the extra machine time buys. All of it goes on paper: writing a sheet a factory can be held to is the step that makes the swatch binding.
The garment samples come after that, and the sequence is the usual three. Fitted in stock yarn, then made in the final yarn and colour, then made on the line by the people who will run the order.
The middle one is the one to photograph and the last one is the one to keep. A salesman sample that never reached the line proves what the sample room can do, not what the factory can do.
Every round should end with a signed sample held by both sides. On knitwear that signature should include the gauge, the yarn lot and the stitch count. Those three are what a later batch drifts from.
Linking and Trimming Are Hand Work
Most of the labour in a knitted sweater is not in the knitting. It sits in linking, trimming and pressing, where a person handles each piece.
Linking joins loop to loop along a seam. It is slow and it needs a trained hand. That is why a linked sweater costs more than a cut one on the same yarn.
It is also where a garment fails visibly. A shoulder that drops, a neck that will not sit flat, a sleeve that twists. All three are linking faults. None of them shows in a photograph of the front.
So ask to see the linking room, not the knitting floor. A plant with eight linking machines and twelve people at them is a plant that makes sweaters. A plant with two is a plant that mostly cuts fabric and sends the linking out.
Then measure the shoulders on three samples from the same batch. If the width moves by more than a few millimetres, the linking is not controlled, and the bulk will move the same way.
The neck is the second failure point, and it is decided at the machine. A rib neckline holds its shape because the rib is knitted with elastane and pressed to a set width.
Ask two things: how many centimetres of rib, and whether the rib yarn carries elastane. A neck that gapes after ten wears is usually a plain rib that was stretched to fit and never came back.
What the Wash Does to Wool
Wool and its blends move when they are washed. A sweater that measures correctly on the table can arrive at the customer two centimetres shorter.
The test is simple and cheap. Wash the salesman sample at the temperature you will print on the care label. Dry it the way the label says, then measure the same points again.
Ask for the figures before bulk. Length, chest and sleeve, before and after, on the final yarn. A factory that has run the test has numbers on file; one that has not will offer an opinion.
Pilling is the other question. A soft hand often comes from a wash finish that lifts fibre, and lifted fibre balls where it rubs. Ask what finish was applied and how the sample scored on a pilling test.
Hand wash and machine wash give different results on the same sweater. If the label says machine wash, test machine wash. The label is a promise and the sample is the evidence. A visit before the goods ship can confirm the count and the cartons; what an inspection report can and cannot prove is a separate question.
Why the Minimum Is a Weight, Not a Count
The quote says 200 pieces. The real floor is the yarn, and yarn is sold and dyed by weight.
A mid gauge sweater takes roughly half a kilo to a kilo of yarn, depending on size and stitch. So a mill that dyes 100 kilograms of a colour is dyeing enough for one to two hundred sweaters.
That arithmetic is why the piece count in a quote is often a round number. It is not a preference. It is the yarn lot divided by the weight per garment, rounded down with a margin.
Two consequences follow. A custom colour on a small order is expensive, because the mill charges for the lot and not for the part you use. And a second colour splits the same lot into two, so each colour starts again at the minimum.
The way through is to use a yarn the factory already stocks, or to place one order with two colours and accept the combined weight. Both are ordinary. Neither is a discount.
Reading a Knitwear Quote
A knitwear quote has six lines, and each one can hide a decision that changes the garment.
| Line | The question it should answer | What it often hides |
|---|---|---|
| Yarn | Which count, which fibre, who buys it | That the yarn is bought on your account, not theirs |
| Knitting | Which gauge, and knitted to shape or flat | A cut and sew route priced as a knitted one |
| Linking and trimming | How the panels are joined | Overlock work quoted as linking |
| Washing and finishing | What finish, and what it does to hand | A soft finish that lifts fibre and causes pilling |
| Labels | Who prints, and to whose artwork | Who carries the claim if the percentage is wrong |
| Packing | Bag, hangtag, carton count | Items removed to hit a target price |
Ask for the six lines separately even when the factory would rather quote one price. A single number cannot be compared with another single number if neither says which route was priced.
The written order matters here as much as the quote. Where the order stops being a promise is the point at which the gauge and the yarn lot are either recorded or lost. The wider brief starts with the six questions that sort a clothing manufacturer.
Who Owns the Claim on the Label
The factory prints the care label. The importer owns what it says. That split is the same in knitwear as in any other garment, and wool makes it sharper.
In the United States the fibre content rules sit in the fibre naming rules at 16 CFR part 303. They deal with how each fibre is named, how a small share is shown, and the tolerance on a stated percentage.
Care instructions sit in a separate rule, the care labelling requirements at 16 CFR part 423. What you print there is a promise about washing, and the wash test in the previous section is how you keep it.
Wool blends are where a percentage goes wrong most often. A 70 percent wool claim on an untested blend has no evidence behind it. The label is also the part a regulator reads first.
Questions Buyers Ask About Knitwear Factories
What gauge should a sweater be?
Seven gauge is the usual default for volume knitwear. Twelve gauge gives a finer, smoother surface on merino or cashmere, and three gauge is for chunky heavy knits.
What is the minimum order for knitwear?
Factories often quote 200 pieces. The real floor is the yarn lot, which is dyed by weight and sets how many pieces one colour can cover.
Why is my reorder a slightly different colour?
The yarn came from a different dye lot. Keep the lot number from the first order and ask whether the mill still holds that lot.
What does linking mean?
Linking joins knitted loops to matching loops along a seam. It is hand work on a dedicated machine, and it is why a shaped sweater costs more than a cut one.
How long does knitwear production take?
Sampling usually runs three to five weeks from swatch to approved sample. Bulk then takes roughly 30 to 45 days, and linking is often the queue.
Do I need a laboratory test for a wool blend?
If you print a fibre percentage, the claim is yours. A test is the only evidence behind it, and a blend is where an untested percentage most often fails.
The Bottom Line
Two questions decide which factory you are talking to. Which gauge, and are the panels knitted to shape or cut from fabric.
Get those two answers in writing, add the yarn lot and the wash result, and the quote becomes comparable. Without them you are comparing two prices for two different sweaters.
Send the Swatch Question
Send us the style, the yarn you have in mind and any quote you already hold. We will check the gauge and the construction route, ask for the swatch before the garment, and tell you where the yarn lot sets your real minimum.
Send the Style
Questions & Comments
We read every one and reply within 24 hoursGot a sweater quote that names a fibre and nothing else? Tell us the style and the price you were given. We will say which gauge and which construction route it describes, and what the quote left out.