Woven Label Manufacturer: Three Choices Before Artwork
A woven label is a tiny piece of cloth that carries the brand, the size and the fibre content. It costs a few cents and it is the part of a garment a customer reads while standing in front of a mirror. Three choices decide it before any artwork exists. The sheet that fixes the weave, the fold and the edge is where the order is settled.
The Short Answer
Three choices come first: the weave, the fold and the cut edge.
The weave decides how much detail survives. The fold decides how the label is attached. The cut edge decides whether it frays in the wash.
Artwork comes after those three, not before. A logo drawn for a printed label often cannot be woven at the size the buyer has in mind.
What a Label Has to Do
A label does four jobs: it names the brand, states the size, carries the care instruction and often names the country of origin.
Four jobs in a space the size of a stamp is the whole design problem. Something has to give.
Most brands split it. A main label carries the brand at the neck. A small size label sits at the side seam. A care label carries the text and the origin.
Decide the split before the weave, because a care label with an eight line instruction is not a job for a fine weave.
Damask or Satin
Two weaves cover most of the trade: damask and satin.
Both are made on a jacquard loom, which raises selected threads to form a pattern. The pattern lives in the loom program, not in an image file. That is why a design cannot simply be resized after the loom is set.
A label is woven as a ribbon, several across at once. The ribbon is then cut, folded and sealed, which is why the same design can arrive in three different folds from the same mill.
Damask is dense and matte, and it holds fine detail. Small letters stay readable at a size where satin turns to mush.
Satin is smoother and shinier, and it looks richer on a dark ground. It also has a softer hand, which matters on a label that touches skin.
Ask which weave the sample uses, then look at the smallest text on it. A supplier who shows a large logo and hides the care text has shown you the easy half.
Ask for the weave density too. A denser weave costs more and reads better. The figure is usually written as a yarn count.
Density is what makes a two millimetre letter legible. Below a certain count, the warp and weft are wider than the stroke, and a thin letter turns into a blur.
Colour Count and What It Costs
A woven label is made on a loom that raises selected warp threads. Each colour needs its own set of hooks.
So colour count is the main cost step. Two colours are cheap. Six colours on a small label cost more than the label is worth.
Ask what the loom can do at your size. A loom that runs eight colours on a large label may only manage four at ten millimetres.
The practical answer is to simplify. A one colour label in a good weave looks better than a four colour label where the text has filled in.
A single colour costs one hook set and one pass. Each additional colour adds a hook set, a thread and a chance for the pattern to shift by a thread.
Ask for the colour references in thread numbers, not in screen values. A thread supplier changes a shade more often than a paper mill does.
The Fold: What Decides the Stitch
Fold is the second choice and the one buyers get wrong most often.
An end fold turns both short ends under, so the label can be sewn flat at the neck. A centre fold folds once in the middle, so the label stands up like a small flag.
A mitre fold turns the corners in on both ends. A straight cut has no fold at all and is sewn along one edge.
A loop fold joins the ends into a ring, which is how a label goes into a side seam.
| Fold | Where it goes | What it needs |
|---|---|---|
| End fold | Back neck, flat | Two folds and a firm weave |
| Centre fold | Back neck, standing | Stiffer yarn so it does not droop |
| Mitre fold | Back neck, corners hidden | An extra fold step, more cost |
| Loop fold | Side seam | A narrow width and a clean join |
| Straight cut | Inside a seam allowance | A sealed edge, or it frays |
Ask which fold the sample uses and measure the folded size. A centre fold that is too wide will not lie flat against a collar.
The Cut Edge
A woven label is cut from a ribbon, and a cut edge frays unless it is sealed.
Three methods seal it. An ultrasonic cut melts the yarn. A hot knife does the same with more heat. A woven edge needs no cut at all.
A woven edge is the finest finish and the slowest, which is why it appears on costly garments.
The seal is only as good as its width. A seal narrower than a millimetre opens after a few washes, and the seam then collects loose threads.
Ask how the edge is finished, then wash a sample twice. A label that frays in the wash leaves a thread in the seam and a complaint in the review.
Hand: The Label That Scratches
A neck label touches skin all day. Stiff yarn and a hard cut edge scratch.
Three things soften a label: a finer yarn, a satin weave and a folded edge instead of a cut one.
Ask for a sample and press it against your own neck for a minute. That minute is a better test than a photo on a screen.
Ask how the label is finished at the ends. A folded end is soft; a sealed end is thin and can feel like a wire on a sensitive neck.
Backing and Attachment
A label can arrive with a paper backing, with an iron-on film, or with adhesive already applied.
Paper backing is for sewing. Iron-on film suits a small brand without a sewing line. Adhesive suits a sample or a temporary label, not a garment that will be washed forty times.
Ask which one is quoted. The backing changes the price and the way the label is handled on a line.
An iron-on film adds a step at the sewing line, because heat and pressure have to be applied evenly. A paper backing needs a stitch, which is slower and stronger.
What Goes On It
Text on a label is a design choice and a legal one.
Fibre content, country of origin and care instructions are required in most markets. The exact wording is set by local rules, not by the supplier.
Ask for the text in the language of the market, with the characters you need. A loom set up for Latin letters may not carry a symbol or an accent, and the artwork has to match the loom.
Ask the supplier what characters their loom can weave. Not every loom handles a symbol, and a care symbol drawn in artwork may arrive as a smudge.
A check on the woven text is worth booking on the first batch, because a wrong character on a woven label cannot be corrected later.
Four Tests Before the Batch
Wash, rub, fray and read. Four tests cover almost every complaint a label produces.
The wash test runs five cycles at the temperature on the care label, then checks the weave for pilling and the edge for fraying.
It can be run at home in a domestic machine. Wash five small samples together, dry them the way the care label says, and compare the edges side by side.
A single wash proves little. The fifth is where a weak seal shows, and where a soft yarn starts to pill.
The rub test presses the label against a white cloth and pulls. Colour that transfers will transfer onto a white shirt.
The fray test cuts a fresh sample and rubs the edge between finger and thumb twenty times. A sealed edge survives; a plain cut sheds.
The read test is a person reading the care text at arm’s length. If they cannot, the weave is too coarse for the size.
Test methods for textiles are published by standards bodies, and the body that lists those methods names the procedure for each.
Nine Lines a Label Quote Needs
| Line | What it must state |
|---|---|
| Weave | Damask or satin, and the density |
| Colours | Count, and thread references |
| Size | Cut size, and the folded size |
| Fold | Type, and how many folds |
| Edge | Ultrasonic, hot cut, or woven |
| Backing | Paper, iron-on, or adhesive |
| Text | Exact wording, and the characters used |
| Minimum | Per design, and per colour set |
| Packing | Labels per roll, and rolls per carton |
The packing line matters because labels ship on rolls. A roll that is wound too tight curls the label, and a curled label will not lie flat under a needle.
Minimums and Loom Setup
A woven label needs a loom setup per design. The setup is charged once and the labels come off the loom in a ribbon.
That is why the minimum is per design, not per order. Four designs of a hundred labels each cost more than one design of four hundred.
Ask how much ribbon comes off one setup. A loom runs continuous ribbon, so a small order is a short length and the setup is spread over fewer labels.
Ask whether two colourways can share a setup. Sometimes they can, with a thread change and no new program.
Ask whether the setup is kept. A supplier who holds the design files and the loom program can repeat without a new charge.
The clause that keeps the loom program on file is worth a sentence, because a label is a brand asset, not a spare part.
Where Labels Are Made
Label weaving clusters with narrow fabric work, because a label is a ribbon woven on a narrow loom.
So a supplier that offers labels and hangtags may be brokering one of them. Ask which part is woven in house.
Ask how many looms run and what the narrowest width is. A narrow loom makes a delicate label; a wide one makes a ribbon that must be cut down.
Ask how the design file is stored. A design kept as a bitmap instead of a loom program has to be redrawn at reorder, and the second batch drifts.
Freight and the Last Cost
Labels are light and they travel in cartons or on rolls. Freight is rarely the deciding number here.
It still has to be counted. Ask for cartons per thousand and the carton size, then compare two quotes on the same basis.
How a forwarder bills a small carton matters when labels ship alongside garments, because a small box has a minimum charge.
On the import side, a woven label and a printed label can sit in different places in the tariff schedule. One is a textile article and the other is printed paper. The tariff schedule the commission publishes is where the line is fixed.
Questions Buyers Ask About Woven Label Suppliers
Damask or satin: which should I choose?
Damask for small text and a matte finish. Satin for a soft hand and a richer look on dark cloth.
Why has my small text filled in?
The weave is too coarse for the size, or the colour count is too high for the loom at that width.
What fold do I need at the back neck?
End fold for a flat label, centre fold if you want it to stand. Mitre if the corners must disappear.
Why is the edge fraying?
It was cut and left unsealed. Ask for an ultrasonic cut or a woven edge.
Ask too how wide the seal is. A narrow seal looks tidy and opens after a few washes.
Can a woven label carry a symbol?
Sometimes. Ask which characters the loom handles before the artwork is drawn.
Do I pay a setup every order?
Only if the loom program is not kept. Ask before the second order, not after.
The Bottom Line
Choose the weave, the fold and the edge before artwork. Then draw to those limits, not to a screen.
A label that reads at arm’s length, lies flat and keeps its edge through five washes is worth more than a cent saved on yarn.
Send the Artwork
Send the logo, the text that must appear and the size you have room for. We will say which weave can hold it, price two folds and two edge finishes, and wash a sample five times before the loom is set.
Send the Artwork
Questions & Comments
We read every one and reply within 24 hoursHas a label frayed in the wash, or has small text filled in on the loom? Send the size and the artwork. We will say which of the three choices was never made.