Tissue Paper Supplier: Cheap Paper, Pricey Print
Home
Yiwu, Zhejiang, China
Mon – Fri 9:00 AM – 6:00 PM · Sat 9:00 AM – 4:00 PM
[email protected]

Tissue Paper Supplier: Cheap Paper, Expensive Print

Alan Xiao, Founder of Sourcing Pioneer
Alan Xiao Founder, Sourcing Pioneer
· Updated October 28, 2026 · 9 min read

Tissue paper costs almost nothing and gets thrown away in seconds. What you actually buy is a printed surface with your name on it, and the print costs more than the sheet. The sheet that fixes the weight, the print and the fold is where a tissue order is decided.

Studio still life on a flat cream surface showing a stack of folded printed tissue paper in soft beige with a small navy logo repeat, a loose sheet unfolded beside it, with a navy serif headline reading TISSUE PAPER and an amber subhead reading PRINT FIRST
A sheet, a fold and a print plate. Two of the three are one-off costs.

The Short Answer

Four numbers set the order: paper weight, sheet size, print colours and fold.

Stock colour tissue is cheap and needs no plate. Printed tissue needs a plate per colour, and that plate is charged once.

So the question is not the price per ream. It is how many sheets you will use in a year, because the plate is divided across them.

Flat vector diagram on a cream background with three labelled columns reading PLATE, PAPER and CARTON inside one outlined strip, with the note TWO ARE ONE-OFF.
Two of the three are charged before a single sheet is printed.

What You Are Actually Buying

A tissue order has five lines: weight, sheet size, colour, print and fold.

Weight is written in grams per square metre. Sheet size is written in centimetres, before folding. Colour is either a stock shade or a match to your brand.

Print is a repeat pattern or a single logo. Fold decides how the sheet sits in a box.

Every one of the five changes the price, and only one of them is expensive.

A worked example makes the sheet size concrete. A box that is twenty by fifteen centimetres takes two half sheets. Five hundred boxes take a thousand sheets. A supplier quotes by weight, so the useful conversion is sheets to kilos at the weight you chose.

Ask for that conversion on the quote. A ream price without a sheet count leaves the buyer doing arithmetic with a guess.

Weight: Light Is Not Always Cheap

Light tissue is translucent and shows what is under it. Heavy tissue wraps crisper and hides the product.

A very light sheet tears at the fold and looks thin in a photograph. A very heavy sheet feels like a paper bag and costs more to ship.

Ask for the weight and a folded sample, not a flat sheet. The fold is where a light paper shows itself.

Ask too whether the weight is measured before or after the print. A coated or heavily printed sheet gains a little. The figure on the quote can be the raw paper.

Weight also decides how the sheet behaves in a humid store. A light sheet takes water faster, and a damp sheet prints unevenly and folds badly.

Stock Colour or a Brand Match

Stock colours are made in large runs and sold by the ream. They are cheap, and the shade is whatever the mill had that week.

A brand match is a dye lot made for you. It costs more and it comes with a minimum, because a mill does not stop for a small order.

Ask for the shade number and a physical sample. A screen colour is not a paper colour.

Take the sample into the shop where the tissue will be used. A shade that looks right under a desk lamp can look green under a shop light, and the customer sees the shop light.

Tissue is sold by ream or by weight, and the two are not the same. Ask which one the price refers to before the numbers are compared.

If you sell the same tissue for years, ask how the mill holds the shade between lots. That answer decides whether your box looks the same in year three.

Four stock shades cover most of the trade: natural, bright white, black and a soft recycled grey. Each behaves differently under print, and black shows a scuff first.

Ask for the shade name in the mill’s own words. Two suppliers calling a colour ivory can be holding two different papers.

Print: One Colour, Loose Registration

Tissue is printed on a flexo press, usually in one or two colours.

Registration is looser than on a carton, because tissue stretches as it runs. A logo printed on tissue will sit a millimetre or two off centre, and that is normal.

So a design with a thin border will look wrong, and a design with a centred mark will look right. This is a design decision, not a printing fault.

Ask for the print tolerance in millimetres, then design outside it. A buyer who knows the number stops arguing about a job that was never possible.

Ask for a proof on the actual paper. A proof on white paper shows the artwork, not the print.

One colour is the sensible start. A single plate costs less, and a repeat pattern in one colour reads well on a light sheet. A second colour doubles the plate and adds a registration problem between the two.

Ask how much coverage the design uses. A small mark prints cleanly; a full flood of ink stiffens the sheet and changes the fold.

Fold and Sheet Size

The fold decides how much tissue shows in a box and how it sits under a lid.

A half fold gives a soft bed. A full fold gives a neat square. A tissue that is too large looks untidy and one that is too small leaves the product exposed.

Ask for the folded size, not the flat size. Buyers order a sheet and receive something that does not fit the box.

Ask how the tissue is packed. Loose sheets in a carton arrive creased. A bundle wrapped in film arrives flat.

Ask for the folded size in the same units as the box. A supplier working in centimetres and a buyer working in inches will agree on a number and disagree on a product.

FoldWhat it givesWhere it goes wrong
Half foldA soft bed under the productSits uneven in a square box
Full foldA neat square that fills a lidToo thick for a shallow box
Loose sheetFastest to useArrives creased and looks untidy
Printed sleeveReplaces the tissue entirelyCosts more than the sheet it hides

Minimums: The Plate Is the Gate

Printed tissue has two minimums: a print run and a paper run.

The print run is set by the press. The paper run is set by the mill, and it is usually the larger of the two.

That is why a stock colour with a single printed logo is the cheapest way in. The paper is already made; only the plate is new.

Ask which minimum applies and what the reorder minimum is. A first order and a repeat order rarely share a number.

Reorder minimums are usually lower, because the plate exists and the paper may still be in stock. Ask how long the supplier holds the plate before it is scrapped.

Ask too what happens if the shade changes between runs. A cheap reorder in a slightly different paper is a shelf problem, not a saving.

The clause that keeps the plate with you matters if you plan to change printer later.

Nine Lines a Tissue Quote Needs

LineWhat it must state
PaperWeight in gsm, and the shade
SheetFlat size, and the folded size
PrintColours, coverage, and tolerance
PlateCost, and who holds it
InkWater based or not, and food safe
MinimumPer print run, and per reorder
PackingSheets per bundle and per carton
Lead timePlate, proof, then production
TestRub, wet bleed, and who signs

The ink line is the one buyers forget. Ink on tissue touches hands and, in a food box, touches food.

Freight: Light and Bulky

Tissue weighs almost nothing and fills a carton. Freight follows volume, so the carton is the cost.

Ask for sheets per bundle, bundles per carton and carton dimensions. Then compare two quotes on that figure, not on the ream price.

Tissue is one of the few products where the packaging weighs more than the goods. A carton of tissue is mostly board and air, and that is what the forwarder bills.

A compressed bundle saves space and can crease the sheet. Ask which one the supplier ships by default.

How a forwarder prices a light carton is the number that decides whether a printed tissue order works at all.

Three Tests Before the Batch

Rub, wet bleed and tear. Three tests catch almost every complaint this product has.

The rub test presses a white cloth on the print and pulls. A print that marks at once will mark in a box.

The test can be run at a desk in a minute. Rub the printed area twenty times with a dry finger, then with a damp one, and look at both the sheet and the finger.

The wet test puts a drop of water on the print and waits. Ink that runs into the paper is ink that will run on a damp hand.

The tear test folds a sheet twice and pulls. A light paper tears at the second fold, which is exactly what happens when a shop wraps a product.

Test methods for paper are published by standards bodies, and the body behind those methods names the procedure for each. A supplier who already runs them will recognise the words.

A check on the printed bundles catches the fourth failure, which no bench test finds: a plate that wore during a long run.

Where Printed Tissue Is Made

Tissue printing clusters near paper converting, because the sheet is made on one machine and printed on another.

So a supplier who quotes both paper and print may be brokering one of them. Ask which step happens in house.

Ask which press the job will run on. A wide press can print many sheets at once. A narrow one cannot take the same plate.

Ask how many colours the press can run in one pass. A two-colour press does in one pass what a single-colour press does in two, and the second pass is where registration drifts.

Ask how the plate is stored between orders. A plate left on a shelf without a sleeve is a plate that prints a scratch in year two.

Recyclability and the Ink Question

Tissue is usually recyclable, and printed tissue is only as recyclable as its ink.

A water based ink is the normal choice and the one a recycling claim can survive. A solvent ink is cheaper and smells in a closed box.

Ask whether the ink is food safe if the tissue goes near food. A paper that touches pastry needs an answer, and the answer cannot be added after the run.

On the import side, plain tissue and printed tissue can sit in different places in the tariff schedule. The printed sheet has a different identity from the paper it started as. The tariff database the commission publishes is where the line is fixed.

Cartons and the Last Cost

Packing is the last line and the one that decides how the tissue arrives.

Ask for the bundle wrapping, the carton count and whether an inner bag is used. A carton that takes water in transit delivers tissue with a tide mark.

A poly inner bag costs a few cents and prevents the tide mark. Ask whether it is standard, because in a humid season it is the difference between a saleable carton and a claim.

The drop sequence a packed carton must survive is worth booking before the first shipment, because a creased sheet is not recoverable.

Questions Buyers Ask About Tissue Suppliers

What weight is normal for retail tissue?

Light enough to fold softly and heavy enough not to tear at the second fold. Ask for a folded sample at the weight quoted.

Can I print a full colour logo on tissue?

You can, and the registration will move by a millimetre or two. Design without thin borders.

Why is custom print so much dearer than stock colour?

Because the plate is new and the paper run has a minimum. Stock colour shares both costs with other buyers.

Is printed tissue recyclable?

Usually, if the ink is water based. A heavy solvent print is the case that needs checking.

Why does my tissue arrive creased?

The bundle is compressed too hard or the sheets are loose in a carton. Both are packing decisions.

Do I own the print plate?

Only if the order says so. A plate held by the printer is a reason to stay with the printer.

The Bottom Line

Price the plate, the paper and the carton as three costs. The paper is the smallest, and the carton decides whether the order works.

Then test one folded sheet the way a shop will use it. A tissue that survives the second fold and the rub is a tissue you can reorder.

PLATE FIRST

Send the Artwork

Send the logo, the box size and the number of sheets you expect to use in a year. We will price stock colour against a custom print, test one folded sheet the way your shop will use it, and show what the plate costs per sheet at your volume.

Send the Artwork

Questions & Comments

We read every one and reply within 24 hours

Paid for a plate that only works at one printer, or a sheet that tore on the second fold? Send the weight and the artwork. We will say which cost was never divided.

0
Would love your thoughts, please comment.x
()
x