Private Label Lipstick: Bullet, Colour and Heat Test
Home
Yiwu, Zhejiang, China
Mon – Fri 9:00 AM – 6:00 PM · Sat 9:00 AM – 4:00 PM
[email protected]

Private Label Lipstick: The Bullet, the Colour and the Heat Test

Alan Xiao, Founder of Sourcing Pioneer
Alan Xiao Founder, Sourcing Pioneer
· Updated October 26, 2026 · 9 min read

A lipstick is a solid that has to stay solid in a warehouse. Three things decide whether a run works. What the bullet is made of, whether the colour is legal, and whether the shade survives a second batch.

Studio still life on a flat cream surface showing three lipstick bullets standing upright in a row in nude, deep red and berry shades, with one metal case open beside them and a printed shade card, with a navy serif headline reading PRIVATE LABEL LIPSTICK and an amber subhead reading BULLET AND COLOUR
A bullet is a structure. Heat decides whether it survives the trip.

The Short Answer

Ask what the bullet is built on before you ask for a shade. Wax and oil ratios are what keep it standing, and they are not visible in a photo.

Ask which colour listing the pigment comes from. In the United States a cosmetic colour has to come from a certified batch on a specific list.

Ask how many kilos the batch is, then multiply by the number of shades. The shade count is the cost driver in this product, not the tube.

Then ask what heat the bullet has been tested at. A lipstick that slumps in a delivery van is a return, whatever the swatch looked like.

What a Bullet Is Made Of

A lipstick is a mixture of wax, oil, butter and pigment, poured as a liquid and cooled into a solid. The wax gives it shape, the oil gives it glide, and the pigment gives it colour.

Move those ratios and the product changes character. More wax makes a firmer bullet that stands up in heat and feels dry on the lip.

More oil makes it creamy and comfortable, and it also makes the bullet soft. A soft bullet can look perfect in a sample and bend at the first warm afternoon.

That is why the base is a specification, not a preference. Two factories can both quote a matte red and be selling you two different solids.

Ask for the base by its components, and ask which one they use for a long-wear variant. A long-wear bullet usually carries a film former, which is a different base again. Writing it down is the difference between a shade and a repeatable product. The sheet a base is written on covers the base as well as the colour.

Flat vector diagram on a cream background showing three lipstick bullets side by side, the first standing straight labelled COOL, the second leaning slightly labelled WARM, and the third slumped labelled HOT, each with a small temperature gauge
The same bullet at three temperatures. Only one of them is a saleable product.

Heat Decides the Bullet

The test that matters is not how it feels on the lip. It is what happens at the temperature a carton reaches in summer.

A container left on a dock or in a van will sit well above room temperature for hours. A bullet built on a soft base will lean, sweat or collapse, and the customer opens a damaged product.

So ask for a heat test, and ask at what temperature and for how long. A factory that runs the test will answer with a number and a duration. A factory that does not will describe the product as stable.

Ask a second question while you are there. How the bullet is held in the case decides whether it wobbles, and a loose bullet fails earlier than a soft one. A visit is the only way to see the fill line. What a visit can and cannot confirm is worth reading before you book one.

One Colour Name, Three Lists

Colour is the part of this product with a legal rule attached, and the rule is checkable in a way most buyers never use.

In the United States, colour additives sit in 21 CFR part 74, and the part splits by use. One subpart covers colours for food, one covers drugs, and one covers cosmetics, with the same colour name appearing in more than one place.

The listing of colour additives subject to certification at 21 CFR part 74 is where that split lives. FD&C Red No. 40, for example, is listed once for food and again, at a different section, for drugs and for cosmetics.

A lipstick is a cosmetic, so the cosmetic listing is the one that applies. A factory that names the colour without the section has told you the shade, not whether you may sell it.

There is a second layer. These colours are subject to certification. That means the colour batch itself is sampled and certified before use, and the certificate belongs to that lot.

Each listing also carries its own specification, and that document is where limits on impurities sit. It is one more reason to ask for the certificate, and not just the shade name. Ask for the lot number of the pigment and the certification behind it. It is a short question, and it separates a factory that buys cosmetic-grade colour from one that buys the cheapest red powder it can find.

Flat vector diagram in three columns on a cream background labelled FOOD, DRUG and COSMETIC, each showing the same red colour chip, with the COSMETIC column marked by an amber tick
One colour name, three lists. Only one of them is your product.

Matching a Shade Across Batches

A shade is a mixture of pigments, and pigments arrive in lots. Two lots of the same pigment are close, and close is not identical.

The result is the classic complaint in this category. Batch one and batch two look the same in the factory and different on a counter under a shop light.

Two habits prevent most of it. Approve the shade under two light sources, daylight and a warm indoor light. A pair of pigments can match under one and drift under the other.

Then keep a physical standard. A poured sample of the approved batch, kept sealed and away from heat, is what the next batch is compared against. A photograph is not a standard.

Ask the factory how they match a reorder. A plant that answers with the retained sample is working. A plant that answers with the formula alone is guessing at the pigment. Putting the standard in the order is what makes it binding, and the clause that names a standard costs one line.

Moulding, Filling and the Finish

The bullet gets its shape in one of two ways, and the difference shows on the surface.

Moulding pours the warm mass into a mould, cools it, and the bullet comes out with a smooth, even surface. It is the route that gives a clean finish and a consistent tip.

Direct filling pours the mass straight into the case and shapes the tip afterwards. It is faster and cheaper, and the surface often shows a small mark or a slight ring where the mass settled.

Neither is wrong. They cost differently, and one looks more expensive on a shelf. Ask which route the quote is based on, because a sample approved from one route does not promise the other. The carton is a label as well. The cosmetic label rules for a carton at 21 CFR part 701 apply to it the way they apply to a jar.

The case matters as much as the bullet. Ask who supplies it, whether the bullet is glued or held by friction, and whether the same case is used across the shade range. A case change after approval means a new fill trial.

How Long a Lipstick Run Takes

The critical path in this product is shade approval, not production. The bullet pours quickly, and the arguing about the colour takes weeks.

A base sample comes first, and it is a small pour. Then each shade is matched against the reference, and each match is a new sample until it is approved.

Only after that does the batch run, and the filling and casing come after the batch. A range of six shades multiplies the approval loop six times.

Ask for the schedule shade by shade. A factory that quotes one date for eight shades is assuming each one passes first time, which is rare on a first run.

Two habits shorten the loop. Approve one shade fully before starting the next, so the reference does not move. And ask for the shade under two lights at the approval stage.

When the Case Fights the Bullet

The case is not a neutral container. Metal, plastic and the base can react, and the reaction shows up weeks after filling.

Some metals need an inner lining to sit against a cosmetic mass. Without it the surface can darken, or the base can pick up a metallic note.

Ask two questions when the case is chosen. Whether it has an inner lining, and whether the factory has filled this exact case before.

A case that is new to the plant is a new trial, whatever it costs per unit. That trial is the reason a cheap case can make an expensive order.

What a Wear Claim Needs Behind It

Long wear is the claim most often printed and least often tested, and it is the one a customer measures with a coffee cup.

A long-wear bullet carries a film former in the base, which is what makes the colour stay. It also makes the bullet drier, and that trade is the product decision.

If the pack says eight hours, something should have measured eight hours. Ask whether the factory ran a wear test, on how many people, and under what conditions.

A plant that runs one will describe the method. A plant that does not will say the formula is long wearing, which is a description, not a result.

The same logic applies to transfer claims. Smudge proof, kiss proof and transfer free are all measurements, and each needs a defined test before the words go on the carton.

The Minimum Is a Batch Times Shades

The base is made in a batch, and the shades are made from it. That gives this product a minimum with two parts. The arithmetic is the same as in a private label skincare programme, multiplied by the shade count.

First there is the batch. A plant will not run a small mixer for a few hundred units. The base is a fixed weight, and that weight sets a floor on total units.

Then there is the shade count. Each shade is its own pigment dispersion and its own small run. Three shades off one base cost more in setup than one shade does.

That is why a range of eight shades is not eight times the price of one. It is one batch plus eight small dispersions, and the factory prices each part differently.

What you decideWhat it addsWhat it saves
Fewer shadesNothingOne dispersion and one fill trial per shade
One case across the rangeNothingA mould or tooling charge per case
Stock base, your colourLess developmentNothing on the pigment, which you still pay for
A second batch laterA new pigment lot and a new matchNothing, unless the standard is retained

Reading a Lipstick Quote

A quote in this category hides its variables in the same four places, and each one can move the price without the shade changing.

The first is the base. A quote that names a finish but not a base is quoting an idea, and two plants will build it differently.

The second is the pigment. Cosmetic grade colour with certification costs more than an industrial grade, and the difference is invisible until a claim is tested.

The third is the route: moulded or direct filled. The fourth is the case, which is often quoted separately and often supplied by a third party.

Line on the quoteWhat to askWhy it matters
BaseWhich wax and oil system, and the heat resultDecides whether the bullet travels
PigmentCosmetic grade, with a lot and certificationDecides whether the shade is legal to sell
RouteMoulded or direct filledDecides the surface finish on the shelf
CaseWho supplies it, and does one case fit all shadesDecides tooling cost and the fill trial count
TestingHeat test and wear test, namedDecides whether the claims on the pack are backed

Ask for the quote with those five lines separated. A single unit price in this product is a number without a subject.

Questions Buyers Ask About Private Label Lipstick

Can I choose any shade I like for a lipstick?

Not freely. The colour has to be built from pigments permitted for cosmetics, so a reference shade is a target the lab matches within those limits.

Why does my second batch look different?

It is a different pigment lot. Approve shades under two lights and keep a sealed standard from the first batch to compare against.

What is the minimum order for private label lipstick?

It is a base batch plus a small run per shade. Ask for both numbers separately, because the shade count is what makes a short range expensive.

Is a heat test really necessary?

Yes if the goods will sit in a carton in summer. It is the difference between a bullet that stands and one that leans before the customer opens it.

How is a moulded bullet different from a filled one?

Moulding gives a smooth, even surface. Direct filling is faster and cheaper and often leaves a small mark at the tip.

Can the label say eight hour wear?

Only with a test behind it. Ask for the method and the number of people tested before the carton is printed.

The Bottom Line

Three questions settle a private label lipstick. What the base is, which colour listing the pigment comes from, and how many shades sit on one batch.

Ask them before the sample is poured. A shade is easy to approve and hard to repeat.

SHADE CHECK

Send the Shade Card

Send us the shades you want, the finish and the case you have in mind. We will ask the factory for the base and the pigment lot behind each shade, check the colour listings, and tell you how many batches your range really needs.

Send the Shades

Questions & Comments

We read every one and reply within 24 hours

Been sent a lipstick sample that arrived bent, or a second batch that did not match the first? Tell us the shade and the base. We will say what the factory should have tested.

Subscribe
Notify of
guest
0 Comments
Most Voted
Newest Oldest
0
Would love your thoughts, please comment.x
()
x